--- a/include/SDL_video.h	Mon Sep 10 12:11:40 2007 +0000
+++ b/include/SDL_video.h	Mon Sep 10 12:20:02 2007 +0000
@@ -23,16 +23,16 @@
 /**
  * \file SDL_video.h
  *
- * Header file for access to the SDL raw framebuffer window
+ * Header file for SDL video functions.
  */
 
 #ifndef _SDL_video_h
 #define _SDL_video_h
 
 #include "SDL_stdinc.h"
-#include "SDL_error.h"
 #include "SDL_pixels.h"
-#include "SDL_rwops.h"
+#include "SDL_rect.h"
+#include "SDL_surface.h"
 
 #include "begin_code.h"
 /* Set up for C function definitions, even when using C++ */
@@ -42,21 +42,6 @@
 /* *INDENT-ON* */
 #endif
 
-/* Transparency definitions: These define alpha as the opacity of a surface */
-#define SDL_ALPHA_OPAQUE 255
-#define SDL_ALPHA_TRANSPARENT 0
-
-/**
- * \struct SDL_Rect
- *
- * \brief A rectangle, with the origin at the upper left.
- */
-typedef struct SDL_Rect
-{
-    int x, y;
-    int w, h;
-} SDL_Rect;
-
 /**
  * \struct SDL_DisplayMode
  *
@@ -261,51 +246,6 @@
  */
 typedef void *SDL_GLContext;
 
-
-/* These are the currently supported flags for the SDL_surface */
-/* Used internally (read-only) */
-#define SDL_PREALLOC        0x00000001  /* Surface uses preallocated memory */
-#define SDL_RLEACCEL        0x00000002  /* Surface is RLE encoded */
-
-/* Evaluates to true if the surface needs to be locked before access */
-#define SDL_MUSTLOCK(S)	(((S)->flags & SDL_RLEACCEL) != 0)
-
-/* This structure should be treated as read-only, except for 'pixels',
-   which, if not NULL, contains the raw pixel data for the surface.
-*/
-typedef struct SDL_Surface
-{
-    Uint32 flags;               /* Read-only */
-    SDL_PixelFormat *format;    /* Read-only */
-    int w, h;                   /* Read-only */
-    int pitch;                  /* Read-only */
-    void *pixels;               /* Read-write */
-
-    /* Application data associated with the surfade */
-    void *userdata;             /* Read-write */
-
-    /* information needed for surfaces requiring locks */
-    int locked;                 /* Read-only */
-    void *lock_data;            /* Read-only */
-
-    /* clipping information */
-    SDL_Rect clip_rect;         /* Read-only */
-
-    /* info for fast blit mapping to other surfaces */
-    struct SDL_BlitMap *map;    /* Private */
-
-    /* format version, bumped at every change to invalidate blit maps */
-    unsigned int format_version;        /* Private */
-
-    /* Reference count -- used when freeing surface */
-    int refcount;               /* Read-mostly */
-} SDL_Surface;
-
-/* typedef for private surface blitting functions */
-typedef int (*SDL_blit) (struct SDL_Surface * src, SDL_Rect * srcrect,
-                         struct SDL_Surface * dst, SDL_Rect * dstrect);
-
-
 /**
  * \enum SDL_GLattr
  *
@@ -1290,413 +1230,6 @@
  */
 extern DECLSPEC void SDLCALL SDL_DestroyRenderer(SDL_WindowID windowID);
 
-/*
- * Maps an RGB triple to an opaque pixel value for a given pixel format
- */
-extern DECLSPEC Uint32 SDLCALL SDL_MapRGB(const SDL_PixelFormat *
-                                          const format, const Uint8 r,
-                                          const Uint8 g, const Uint8 b);
-
-/*
- * Maps an RGBA quadruple to a pixel value for a given pixel format
- */
-extern DECLSPEC Uint32 SDLCALL SDL_MapRGBA(const SDL_PixelFormat * const fmt,
-                                           const Uint8 r, const Uint8 g,
-                                           const Uint8 b, const Uint8 a);
-
-/*
- * Maps a pixel value into the RGB components for a given pixel format
- */
-extern DECLSPEC void SDLCALL SDL_GetRGB(Uint32 pixel, SDL_PixelFormat * fmt,
-                                        Uint8 * r, Uint8 * g, Uint8 * b);
-
-/*
- * Maps a pixel value into the RGBA components for a given pixel format
- */
-extern DECLSPEC void SDLCALL SDL_GetRGBA(Uint32 pixel, SDL_PixelFormat * fmt,
-                                         Uint8 * r, Uint8 * g, Uint8 * b,
-                                         Uint8 * a);
-
-/*
- * Allocate and free an RGB surface (must be called after SDL_SetVideoMode)
- * If the depth is 4 or 8 bits, an empty palette is allocated for the surface.
- * If the depth is greater than 8 bits, the pixel format is set using the
- * flags '[RGB]mask'.
- * If the function runs out of memory, it will return NULL.
- *
- * The 'flags' tell what kind of surface to create.
- * SDL_SRCCOLORKEY indicates that the surface will be used for colorkey blits.
- * SDL_SRCALPHA means that the surface will be used for alpha blits.
- */
-extern DECLSPEC SDL_Surface *SDLCALL SDL_CreateRGBSurface
-    (Uint32 flags, int width, int height, int depth,
-     Uint32 Rmask, Uint32 Gmask, Uint32 Bmask, Uint32 Amask);
-extern DECLSPEC SDL_Surface *SDLCALL SDL_CreateRGBSurfaceFrom(void *pixels,
-                                                              int width,
-                                                              int height,
-                                                              int depth,
-                                                              int pitch,
-                                                              Uint32 Rmask,
-                                                              Uint32 Gmask,
-                                                              Uint32 Bmask,
-                                                              Uint32 Amask);
-extern DECLSPEC void SDLCALL SDL_FreeSurface(SDL_Surface * surface);
-
-/**
- * \fn int SDL_SetSurfacePalette(SDL_Surface *surface, SDL_Palette *palette)
- *
- * \brief Set the palette used by a surface.
- *
- * \return 0, or -1 if the surface format doesn't use a palette.
- *
- * \note A single palette can be shared with many surfaces.
- */
-extern DECLSPEC int SDLCALL SDL_SetSurfacePalette(SDL_Surface * surface,
-                                                  SDL_Palette * palette);
-
-/*
- * SDL_LockSurface() sets up a surface for directly accessing the pixels.
- * Between calls to SDL_LockSurface()/SDL_UnlockSurface(), you can write
- * to and read from 'surface->pixels', using the pixel format stored in 
- * 'surface->format'.  Once you are done accessing the surface, you should 
- * use SDL_UnlockSurface() to release it.
- *
- * Not all surfaces require locking.  If SDL_MUSTLOCK(surface) evaluates
- * to 0, then you can read and write to the surface at any time, and the
- * pixel format of the surface will not change.
- * 
- * No operating system or library calls should be made between lock/unlock
- * pairs, as critical system locks may be held during this time.
- *
- * SDL_LockSurface() returns 0, or -1 if the surface couldn't be locked.
- */
-extern DECLSPEC int SDLCALL SDL_LockSurface(SDL_Surface * surface);
-extern DECLSPEC void SDLCALL SDL_UnlockSurface(SDL_Surface * surface);
-
-/*
- * Load a surface from a seekable SDL data source (memory or file.)
- * If 'freesrc' is non-zero, the source will be closed after being read.
- * Returns the new surface, or NULL if there was an error.
- * The new surface should be freed with SDL_FreeSurface().
- */
-extern DECLSPEC SDL_Surface *SDLCALL SDL_LoadBMP_RW(SDL_RWops * src,
-                                                    int freesrc);
-
-/* Convenience macro -- load a surface from a file */
-#define SDL_LoadBMP(file)	SDL_LoadBMP_RW(SDL_RWFromFile(file, "rb"), 1)
-
-/*
- * Save a surface to a seekable SDL data source (memory or file.)
- * If 'freedst' is non-zero, the source will be closed after being written.
- * Returns 0 if successful or -1 if there was an error.
- */
-extern DECLSPEC int SDLCALL SDL_SaveBMP_RW
-    (SDL_Surface * surface, SDL_RWops * dst, int freedst);
-
-/* Convenience macro -- save a surface to a file */
-#define SDL_SaveBMP(surface, file) \
-		SDL_SaveBMP_RW(surface, SDL_RWFromFile(file, "wb"), 1)
-
-/*
- * \fn int SDL_SetSurfaceRLE(SDL_Surface *surface, int flag)
- *
- * \brief Sets the RLE acceleration hint for a surface.
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \note If RLE is enabled, colorkey and alpha blending blits are much faster,
- *       but the surface must be locked before directly accessing the pixels.
- */
-extern DECLSPEC int SDLCALL SDL_SetSurfaceRLE(SDL_Surface * surface,
-                                              int flag);
-
-/*
- * \fn int SDL_SetColorKey(SDL_Surface *surface, Uint32 flag, Uint32 key)
- *
- * \brief Sets the color key (transparent pixel) in a blittable surface.
- *
- * \param surface The surface to update
- * \param flag Non-zero to enable colorkey and 0 to disable colorkey 
- * \param key The transparent pixel in the native surface format
- *
- * \return 0 on success, or -1 if the surface is not valid
- */
-extern DECLSPEC int SDLCALL SDL_SetColorKey(SDL_Surface * surface,
-                                            Uint32 flag, Uint32 key);
-
-/**
- * \fn int SDL_SetSurfaceColorMod(SDL_Surface *surface, Uint8 r, Uint8 g, Uint8 b)
- *
- * \brief Set an additional color value used in blit operations
- *
- * \param surface The surface to update
- * \param r The red source color value multiplied into blit operations
- * \param g The green source color value multiplied into blit operations
- * \param b The blue source color value multiplied into blit operations
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \sa SDL_GetSurfaceColorMod()
- */
-extern DECLSPEC int SDLCALL SDL_SetSurfaceColorMod(SDL_Surface * surface,
-                                                   Uint8 r, Uint8 g, Uint8 b);
-
-
-/**
- * \fn int SDL_GetSurfaceColorMod(SDL_Surface *surface, Uint8 *r, Uint8 *g, Uint8 *b)
- *
- * \brief Get the additional color value used in blit operations
- *
- * \param surface The surface to query
- * \param r A pointer filled in with the source red color value
- * \param g A pointer filled in with the source green color value
- * \param b A pointer filled in with the source blue color value
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \sa SDL_SetSurfaceColorMod()
- */
-extern DECLSPEC int SDLCALL SDL_GetSurfaceColorMod(SDL_Surface * surface,
-                                                   Uint8 * r, Uint8 * g,
-                                                   Uint8 * b);
-
-/**
- * \fn int SDL_SetSurfaceAlphaMod(SDL_Surface *surface, Uint8 alpha)
- *
- * \brief Set an additional alpha value used in blit operations
- *
- * \param surface The surface to update
- * \param alpha The source alpha value multiplied into blit operations.
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \sa SDL_GetSurfaceAlphaMod()
- */
-extern DECLSPEC int SDLCALL SDL_SetSurfaceAlphaMod(SDL_Surface * surface,
-                                                   Uint8 alpha);
-
-/**
- * \fn int SDL_GetSurfaceAlphaMod(SDL_Surface *surface, Uint8 *alpha)
- *
- * \brief Get the additional alpha value used in blit operations
- *
- * \param surface The surface to query
- * \param alpha A pointer filled in with the source alpha value
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \sa SDL_SetSurfaceAlphaMod()
- */
-extern DECLSPEC int SDLCALL SDL_GetSurfaceAlphaMod(SDL_Surface * surface,
-                                                   Uint8 * alpha);
-
-/**
- * \fn int SDL_SetSurfaceBlendMode(SDL_Surface *surface, int blendMode)
- *
- * \brief Set the blend mode used for blit operations
- *
- * \param surface The surface to update
- * \param blendMode SDL_TextureBlendMode to use for blit blending
- *
- * \return 0 on success, or -1 if the parameters are not valid
- *
- * \sa SDL_GetSurfaceBlendMode()
- */
-extern DECLSPEC int SDLCALL SDL_SetSurfaceBlendMode(SDL_Surface * surface,
-                                                    int blendMode);
-
-/**
- * \fn int SDL_GetSurfaceBlendMode(SDL_Surface *surface, int *blendMode)
- *
- * \brief Get the blend mode used for blit operations
- *
- * \param surface The surface to query
- * \param blendMode A pointer filled in with the current blend mode
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \sa SDL_SetSurfaceBlendMode()
- */
-extern DECLSPEC int SDLCALL SDL_GetSurfaceBlendMode(SDL_Surface * surface,
-                                                    int *blendMode);
-
-/**
- * \fn int SDL_SetSurfaceScaleMode(SDL_Surface *surface, int scaleMode)
- *
- * \brief Set the scale mode used for blit operations
- *
- * \param surface The surface to update
- * \param scaleMode SDL_TextureScaleMode to use for blit scaling
- *
- * \return 0 on success, or -1 if the surface is not valid or the scale mode is not supported
- *
- * \note If the scale mode is not supported, the closest supported mode is chosen.  Currently only SDL_TEXTURESCALEMODE_FAST is supported on surfaces.
- *
- * \sa SDL_GetSurfaceScaleMode()
- */
-extern DECLSPEC int SDLCALL SDL_SetSurfaceScaleMode(SDL_Surface * surface,
-                                                    int scaleMode);
-
-/**
- * \fn int SDL_GetSurfaceScaleMode(SDL_Surface *surface, int *scaleMode)
- *
- * \brief Get the scale mode used for blit operations
- *
- * \param surface The surface to query
- * \param scaleMode A pointer filled in with the current scale mode
- *
- * \return 0 on success, or -1 if the surface is not valid
- *
- * \sa SDL_SetSurfaceScaleMode()
- */
-extern DECLSPEC int SDLCALL SDL_GetSurfaceScaleMode(SDL_Surface * surface,
-                                                    int *scaleMode);
-
-/*
- * Sets the clipping rectangle for the destination surface in a blit.
- *
- * If the clip rectangle is NULL, clipping will be disabled.
- * If the clip rectangle doesn't intersect the surface, the function will
- * return SDL_FALSE and blits will be completely clipped.  Otherwise the
- * function returns SDL_TRUE and blits to the surface will be clipped to
- * the intersection of the surface area and the clipping rectangle.
- *
- * Note that blits are automatically clipped to the edges of the source
- * and destination surfaces.
- */
-extern DECLSPEC SDL_bool SDLCALL SDL_SetClipRect(SDL_Surface * surface,
-                                                 const SDL_Rect * rect);
-
-/*
- * Gets the clipping rectangle for the destination surface in a blit.
- * 'rect' must be a pointer to a valid rectangle which will be filled
- * with the correct values.
- */
-extern DECLSPEC void SDLCALL SDL_GetClipRect(SDL_Surface * surface,
-                                             SDL_Rect * rect);
-
-/*
- * Creates a new surface of the specified format, and then copies and maps 
- * the given surface to it so the blit of the converted surface will be as 
- * fast as possible.  If this function fails, it returns NULL.
- *
- * The 'flags' parameter is passed to SDL_CreateRGBSurface() and has those 
- * semantics.  You can also pass SDL_RLEACCEL in the flags parameter and
- * SDL will try to RLE accelerate colorkey and alpha blits in the resulting
- * surface.
- *
- * This function is used internally by SDL_DisplayFormat().
- */
-extern DECLSPEC SDL_Surface *SDLCALL SDL_ConvertSurface
-    (SDL_Surface * src, SDL_PixelFormat * fmt, Uint32 flags);
-
-/*
- * This function performs a fast fill of the given rectangle with 'color'
- * The given rectangle is clipped to the destination surface clip area
- * and the final fill rectangle is saved in the passed in pointer.
- * If 'dstrect' is NULL, the whole surface will be filled with 'color'
- * The color should be a pixel of the format used by the surface, and 
- * can be generated by the SDL_MapRGB() function.
- * This function returns 0 on success, or -1 on error.
- */
-extern DECLSPEC int SDLCALL SDL_FillRect
-    (SDL_Surface * dst, SDL_Rect * dstrect, Uint32 color);
-
-/*
- * This performs a fast blit from the source surface to the destination
- * surface.  It assumes that the source and destination rectangles are
- * the same size.  If either 'srcrect' or 'dstrect' are NULL, the entire
- * surface (src or dst) is copied.  The final blit rectangles are saved
- * in 'srcrect' and 'dstrect' after all clipping is performed.
- * If the blit is successful, it returns 0, otherwise it returns -1.
- *
- * The blit function should not be called on a locked surface.
- *
- * The blit semantics for surfaces with and without alpha and colorkey
- * are defined as follows:
- *
- * RGBA->RGB:
- *     SDL_SRCALPHA set:
- * 	alpha-blend (using alpha-channel).
- * 	SDL_SRCCOLORKEY ignored.
- *     SDL_SRCALPHA not set:
- * 	copy RGB.
- * 	if SDL_SRCCOLORKEY set, only copy the pixels matching the
- * 	RGB values of the source colour key, ignoring alpha in the
- * 	comparison.
- * 
- * RGB->RGBA:
- *     SDL_SRCALPHA set:
- * 	alpha-blend (using the source per-surface alpha value);
- * 	set destination alpha to opaque.
- *     SDL_SRCALPHA not set:
- * 	copy RGB, set destination alpha to source per-surface alpha value.
- *     both:
- * 	if SDL_SRCCOLORKEY set, only copy the pixels matching the
- * 	source colour key.
- * 
- * RGBA->RGBA:
- *     SDL_SRCALPHA set:
- * 	alpha-blend (using the source alpha channel) the RGB values;
- * 	leave destination alpha untouched. [Note: is this correct?]
- * 	SDL_SRCCOLORKEY ignored.
- *     SDL_SRCALPHA not set:
- * 	copy all of RGBA to the destination.
- * 	if SDL_SRCCOLORKEY set, only copy the pixels matching the
- * 	RGB values of the source colour key, ignoring alpha in the
- * 	comparison.
- * 
- * RGB->RGB: 
- *     SDL_SRCALPHA set:
- * 	alpha-blend (using the source per-surface alpha value).
- *     SDL_SRCALPHA not set:
- * 	copy RGB.
- *     both:
- * 	if SDL_SRCCOLORKEY set, only copy the pixels matching the
- * 	source colour key.
- *
- * If either of the surfaces were in video memory, and the blit returns -2,
- * the video memory was lost, so it should be reloaded with artwork and 
- * re-blitted:
-	while ( SDL_BlitSurface(image, imgrect, screen, dstrect) == -2 ) {
-		while ( SDL_LockSurface(image) < 0 )
-			Sleep(10);
-		-- Write image pixels to image->pixels --
-		SDL_UnlockSurface(image);
-	}
- * This happens under DirectX 5.0 when the system switches away from your
- * fullscreen application.  The lock will also fail until you have access
- * to the video memory again.
- */
-/* You should call SDL_BlitSurface() unless you know exactly how SDL
-   blitting works internally and how to use the other blit functions.
-*/
-#define SDL_BlitSurface SDL_UpperBlit
-
-/* This is the public blit function, SDL_BlitSurface(), and it performs
-   rectangle validation and clipping before passing it to SDL_LowerBlit()
-*/
-extern DECLSPEC int SDLCALL SDL_UpperBlit
-    (SDL_Surface * src, SDL_Rect * srcrect,
-     SDL_Surface * dst, SDL_Rect * dstrect);
-/* This is a semi-private blit function and it performs low-level surface
-   blitting only.
-*/
-extern DECLSPEC int SDLCALL SDL_LowerBlit
-    (SDL_Surface * src, SDL_Rect * srcrect,
-     SDL_Surface * dst, SDL_Rect * dstrect);
-
-/**
- * \fn int SDL_SoftStretch(SDL_Surface * src, SDL_Rect * srcrect, SDL_Surface * dst, SDL_Rect * dstrect)
- *
- * \brief Perform a fast, low quality, stretch blit between two surfaces of the same pixel format.
- *
- * \note This function uses a static buffer, and is not thread-safe.
- */
-extern DECLSPEC int SDLCALL SDL_SoftStretch(SDL_Surface * src,
-                                            SDL_Rect * srcrect,
-                                            SDL_Surface * dst,
-                                            SDL_Rect * dstrect);
 
 /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
 /* OpenGL support functions.                                                 */
@@ -1811,50 +1344,6 @@
  */
 extern DECLSPEC void SDLCALL SDL_GL_DeleteContext(SDL_GLContext context);
 
-/**
- * \def SDL_RectEmpty()
- *
- * \brief Returns true if the rectangle has no area.
- */
-#define SDL_RectEmpty(X)    (((X)->w <= 0) || ((X)->h <= 0))
-
-/**
- * \def SDL_RectEquals()
- *
- * \brief Returns true if the two rectangles are equal.
- */
-#define SDL_RectEquals(A, B)   (((A)->x == (B)->x) && ((A)->y == (B)->y) && \
-                                ((A)->w == (B)->w) && ((A)->h == (B)->h))
-
-/**
- * \fn SDL_bool SDL_HasIntersection(const SDL_Rect * A, const SDL_Rect * B);
- *
- * \brief Determine whether two rectangles intersect.
- *
- * \return SDL_TRUE if there is an intersection, SDL_FALSE otherwise.
- */
-extern DECLSPEC SDL_bool SDLCALL SDL_HasIntersection(const SDL_Rect * A,
-                                                     const SDL_Rect * B);
-
-/**
- * \fn SDL_bool SDL_IntersectRect(const SDL_Rect * A, const SDL_Rect * B, SDL_Rect * result)
- *
- * \brief Calculate the intersection of two rectangles.
- *
- * \return SDL_TRUE if there is an intersection, SDL_FALSE otherwise.
- */
-extern DECLSPEC SDL_bool SDLCALL SDL_IntersectRect(const SDL_Rect * A,
-                                                   const SDL_Rect * B,
-                                                   SDL_Rect * result);
-
-/**
- * \fn void SDL_UnionRect(const SDL_Rect * A, const SDL_Rect * B, SDL_Rect * result)
- *
- * \brief Calculate the union of two rectangles
- */
-extern DECLSPEC void SDLCALL SDL_UnionRect(const SDL_Rect * A,
-                                           const SDL_Rect * B,
-                                           SDL_Rect * result);
 
 /* Ends C function definitions when using C++ */
 #ifdef __cplusplus