sdl-ios-xcode: build-scripts/ltmain.sh comparison

comparison build-scripts/ltmain.sh @ 3085:4800979de337

Updated libtool from version 1.5.22 to 2.2.6a, so it works on current QNX

author	Sam Lantinga <slouken@libsdl.org>
date	Wed, 04 Mar 2009 08:57:30 +0000
parents	39715a34a0be
children	195eb6d42bf0

comparison

equal deleted inserted replaced

-:fb256fee28d8
+:4800979de337
-# Based on libtool-1.5.22
+# Generated from ltmain.m4sh.
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
+# ltmain.sh (GNU libtool) 2.2.6
-#
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# This is free software; see the source for copying conditions.  There is NO
-#
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# This program is free software; you can redistribute it and/or modify
+# GNU Libtool is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
+# along with GNU Libtool; see the file COPYING.  If not, a copy
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# Usage: $progname [OPTION]... [MODE-ARG]...
 #
-# As a special exception to the GNU General Public License, if you
+# Provide generalized library-building support services.
-# distribute this file as part of a program that contains a
+#
-# configuration script generated by Autoconf, you may include it under
+#     --config             show all configuration variables
-# the same distribution terms that you use for the rest of that program.
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
-basename="s,^.*/,,g"
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
+#
+# MODE must be one of the following:
+#
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=2.2.6
+TIMESTAMP=""
+package_revision=1.3012
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+emulate sh
+NULLCMD=:
+# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+# is contrary to our usage.  Disable this feature.
+alias -g '${1+"$@"}'='"$@"'
+setopt NO_GLOB_SUBST
+else
+case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+eval "if test \"\${$lt_var+set}\" = set; then
+save_$lt_var=\$$lt_var
+$lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+$lt_unset CDPATH
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/usr/bin/grep -E"}
+: ${FGREP="/usr/bin/grep -F"}
+: ${GREP="/usr/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/opt/local/bin/gsed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+exit_status=$EXIT_SUCCESS
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+# Extract subdirectory from the argument.
+func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+if test "X$func_dirname_result" = "X${1}"; then
+func_dirname_result="${3}"
+else
+func_dirname_result="$func_dirname_result${2}"
+fi
+func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+# Generated shell functions inserted here.
 # Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
 # is ksh but when the shell is invoked as "sh" and the current value of
 # the _XPG environment variable is not equal to 1 (one), the special
 # positional parameter $0, within a function call, is the name of the
 # function.
 progpath="$0"
 # The name of this program:
-progname=`echo "$progpath" | $SED $basename`
+# In the unlikely event $progname began with a '-', it would play havoc with
-modename="$progname"
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
-# Global variables:
+progname=$func_basename_result
-EXIT_SUCCESS=0
+case $progname in
-EXIT_FAILURE=1
+-*) progname=./$progname ;;
+esac
-PROGRAM=ltmain.sh
-PACKAGE=libtool
+# Make sure we have an absolute path for reexecution:
-VERSION=1.5.22
+case $progpath in
-TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+[\\/]*|[A-Za-z]:\\*) ;;
+*[\\/]*)
-# See if we are running on zsh, and set the options which allow our
+progdir=$func_dirname_result
-# commands through without removal of \ escapes.
+progdir=`cd "$progdir" && pwd`
-if test -n "${ZSH_VERSION+set}" ; then
+progpath="$progdir/$progname"
-setopt NO_GLOB_SUBST
+;;
-fi
+*)
+save_IFS="$IFS"
-# Check that we have a working $echo.
+IFS=:
+for progdir in $PATH; do
+IFS="$save_IFS"
+test -x "$progdir/$progname" && break
+done
+IFS="$save_IFS"
+test -n "$progdir" || progdir=`pwd`
+progpath="$progdir/$progname"
+;;
+esac
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+s/$bs4/&\\
+/g
+s/^$bs2$dollar/$bs&/
+s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+s/\n//g"
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+$ECHO "$progname${mode+: }$mode: $*"
+}
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+$opt_verbose && func_echo ${1+"$@"}
+# A bug in bash halts the script if the last line of a function
+# fails when set -e is in force, so we need another command to
+# work around that:
+:
+}
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+$ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+$opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+# bash bug again:
+:
+}
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+func_error ${1+"$@"}
+exit $EXIT_FAILURE
+}
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+func_error ${1+"$@"}
+func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+$GREP "$1" "$2" >/dev/null 2>&1
+}
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+my_directory_path="$1"
+my_dir_list=
+if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+# Protect directory names starting with `-'
+case $my_directory_path in
+-*) my_directory_path="./$my_directory_path" ;;
+esac
+# While some portion of DIR does not yet exist...
+while test ! -d "$my_directory_path"; do
+# ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+my_dir_list="$my_directory_path:$my_dir_list"
+# If the last portion added has no slash in it, the list is done
+case $my_directory_path in */*) ;; *) break ;; esac
+# ...otherwise throw away the child directory and loop
+my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+done
+my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+save_mkdir_p_IFS="$IFS"; IFS=':'
+for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+# mkdir can fail with a `File exist' error if two processes
+# try to create one of the directories concurrently.  Don't
+# stop in that case!
+$MKDIR "$my_dir" 2>/dev/null || :
+done
+IFS="$save_mkdir_p_IFS"
+# Bail out if we (or some other process) failed to create a directory.
+test -d "$my_directory_path" || \
+func_fatal_error "Failed to create \`$1'"
+fi
+}
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+my_template="${TMPDIR-/tmp}/${1-$progname}"
+if test "$opt_dry_run" = ":"; then
+# Return a directory name, but don't create it in dry-run mode
+my_tmpdir="${my_template}-$$"
+else
+# If mktemp works, use that first and foremost
+my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+if test ! -d "$my_tmpdir"; then
+# Failing that, at least try and use $RANDOM to avoid a race
+my_tmpdir="${my_template}-${RANDOM-0}$$"
+save_mktempdir_umask=`umask`
+umask 0077
+$MKDIR "$my_tmpdir"
+umask $save_mktempdir_umask
+fi
+# If we're not in dry-run mode, bomb out on failure
+test -d "$my_tmpdir" || \
+func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+fi
+$ECHO "X$my_tmpdir" | $Xsed
+}
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+case $1 in
+*[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+*)
+func_quote_for_eval_unquoted_result="$1" ;;
+esac
+case $func_quote_for_eval_unquoted_result in
+# Double-quote args containing shell metacharacters to delay
+# word splitting, command substitution and and variable
+# expansion for a subsequent eval.
+# Many Bourne shells cannot handle close brackets correctly
+# in scan sets, so we specify it separately.
+*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+;;
+*)
+func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+esac
+}
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+case $1 in
+*[\\\`\"]*)
+	my_arg=`$ECHO "X$1" | $Xsed \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+*)
+my_arg="$1" ;;
+esac
+case $my_arg in
+# Double-quote args containing shell metacharacters to delay
+# word splitting and command substitution for a subsequent eval.
+# Many Bourne shells cannot handle close brackets correctly
+# in scan sets, so we specify it separately.
+*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+my_arg="\"$my_arg\""
+;;
+esac
+func_quote_for_expand_result="$my_arg"
+}
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+my_cmd="$1"
+my_fail_exp="${2-:}"
+${opt_silent-false} || {
+func_quote_for_expand "$my_cmd"
+eval "func_echo $func_quote_for_expand_result"
+}
+if ${opt_dry_run-false}; then :; else
+eval "$my_cmd"
+my_status=$?
+if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+fi
+fi
+}
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+my_cmd="$1"
+my_fail_exp="${2-:}"
+${opt_silent-false} || {
+func_quote_for_expand "$my_cmd"
+eval "func_echo $func_quote_for_expand_result"
+}
+if ${opt_dry_run-false}; then :; else
+eval "$lt_user_locale
+	    $my_cmd"
+my_status=$?
+eval "$lt_safe_locale"
+if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+fi
+fi
+}
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+$SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+s/^# //
+	s/^# *$//
+s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+p
+}' < "$progpath"
+exit $?
+}
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+$SED -n '/^# Usage:/,/# -h/ {
+s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+}' < "$progpath"
+$ECHO
+$ECHO "run \`$progname --help | more' for full usage"
+exit $?
+}
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+$SED -n '/^# Usage:/,/# Report bugs to/ {
+s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	p
+}' < "$progpath"
+exit $?
+}
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+func_error "missing argument for $1"
+exit_cmd=exit
+}
+exit_cmd=:
+# Check that we have a working $ECHO.
 if test "X$1" = X--no-reexec; then
 # Discard the --no-reexec flag, and continue.
 shift
 elif test "X$1" = X--fallback-echo; then
 # Avoid inline document here, it may be left over
 :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-# Yippee, $echo works!
+# Yippee, $ECHO works!
 :
 else
-# Restart under the correct shell, and then maybe $echo will work.
+# Restart under the correct shell, and then maybe $ECHO will work.
 exec $SHELL "$progpath" --no-reexec ${1+"$@"}
 fi
 if test "X$1" = X--fallback-echo; then
 # used as fallback echo
 $*
 EOF
 exit $EXIT_SUCCESS
 fi
-default_mode=
-help="Try \`$progname --help' for more information."
 magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
+magic_exe="%%%MAGIC EXE variable%%%"
-mv="mv -f"
-rm="rm -f"
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
-A) # ASCII based system
-# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-SP2NL='tr \040 \012'
-NL2SP='tr \015\012 \040\040'
-;;
-*) # EBCDIC based system
-SP2NL='tr \100 \n'
-NL2SP='tr \r\n \100\100'
-;;
-esac
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-if test "${LC_ALL+set}" = set; then
-save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
-fi
-if test "${LANG+set}" = set; then
-save_LANG="$LANG"; LANG=C; export LANG
-fi
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-$echo "$modename: not configured to build any kind of library" 1>&2
-$echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-exit $EXIT_FAILURE
-fi
 # Global variables.
-mode=$default_mode
+# $mode is unset
 nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
 execute_dlfiles=
-duplicate_deps=no
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
-#####################################
+extracted_serial=0
-# Shell function definitions:
-# This seems to be the best place for them
+opt_dry_run=false
+opt_duplicate_deps=false
-# func_mktempdir [string]
+opt_silent=false
-# Make a temporary directory that won't clash with other running
+opt_debug=:
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
+# If this variable is set in any of the actions, the command in it
-func_mktempdir ()
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
 {
-my_template="${TMPDIR-/tmp}/${1-$progname}"
+func_error ${1+"$@"}
+func_error "See the $PACKAGE documentation for more information."
-if test "$run" = ":"; then
+func_fatal_error "Fatal configuration error."
-# Return a directory name, but don't create it in dry-run mode
+}
-my_tmpdir="${my_template}-$$"
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+re_begincf='^# ### BEGIN LIBTOOL'
+re_endcf='^# ### END LIBTOOL'
+# Default configuration.
+$SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+# Now print the configurations for the tags.
+for tagname in $taglist; do
+$SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+done
+exit $?
+}
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+$ECHO "host: $host"
+if test "$build_libtool_libs" = yes; then
+$ECHO "enable shared libraries"
 else
+$ECHO "disable shared libraries"
-# If mktemp works, use that first and foremost
+fi
-my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+if test "$build_old_libs" = yes; then
+$ECHO "enable static libraries"
-if test ! -d "$my_tmpdir"; then
+else
-	# Failing that, at least try and use $RANDOM to avoid a race
+$ECHO "disable static libraries"
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
+fi
-	save_mktempdir_umask=`umask`
+exit $?
-	umask 0077
+}
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+# Global variable:
+tagname="$1"
+re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+sed_extractcf="/$re_begincf/,/$re_endcf/p"
+# Validate tagname.
+case $tagname in
+*[!-_A-Za-z0-9,/]*)
+func_fatal_error "invalid tag name: $tagname"
+;;
+esac
+# Don't test for the "default" C tag, as we know it's
+# there but not specially marked.
+case $tagname in
+CC) ;;
+*)
+if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+else
+	func_error "ignoring unknown tag $tagname"
 fi
+;;
-# If we're not in dry-run mode, bomb out on failure
+esac
-test -d "$my_tmpdir" || {
+}
-$echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+shift; set dummy --mode clean ${1+"$@"}; shift
+;;
+compile|compil|compi|comp|com|co|c)
+shift; set dummy --mode compile ${1+"$@"}; shift
+;;
+execute|execut|execu|exec|exe|ex|e)
+shift; set dummy --mode execute ${1+"$@"}; shift
+;;
+finish|finis|fini|fin|fi|f)
+shift; set dummy --mode finish ${1+"$@"}; shift
+;;
+install|instal|insta|inst|ins|in|i)
+shift; set dummy --mode install ${1+"$@"}; shift
+;;
+link|lin|li|l)
+shift; set dummy --mode link ${1+"$@"}; shift
+;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+shift; set dummy --mode uninstall ${1+"$@"}; shift
+;;
+esac
+# Parse non-mode specific arguments:
+while test "$#" -gt 0; do
+opt="$1"
+shift
+case $opt in
+--config)		func_config					;;
+--debug)		preserve_args="$preserve_args $opt"
+			func_echo "enabling shell trace mode"
+			opt_debug='set -x'
+			$opt_debug
+			;;
+-dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			execute_dlfiles="$execute_dlfiles $1"
+			shift
+			;;
+--dry-run | -n)	opt_dry_run=:					;;
+--features)       func_features					;;
+--finish)		mode="finish"					;;
+--mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			case $1 in
+			  # Valid mode arguments:
+			  clean)	;;
+			  compile)	;;
+			  execute)	;;
+			  finish)	;;
+			  install)	;;
+			  link)		;;
+			  relink)	;;
+			  uninstall)	;;
+			  # Catch anything else as an error
+			  *) func_error "invalid argument for $opt"
+			     exit_cmd=exit
+			     break
+			     ;;
+		        esac
+			mode="$1"
+			shift
+			;;
+--preserve-dup-deps)
+			opt_duplicate_deps=:				;;
+--quiet|--silent)	preserve_args="$preserve_args $opt"
+			opt_silent=:
+			;;
+--verbose| -v)	preserve_args="$preserve_args $opt"
+			opt_silent=false
+			;;
+--tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			preserve_args="$preserve_args $opt $1"
+			func_enable_tag "$1"	# tagname is set here
+			shift
+			;;
+# Separate optargs to long options:
+-dlopen=*|--mode=*|--tag=*)
+			func_opt_split "$opt"
+			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+			shift
+			;;
+-\?|-h)		func_usage					;;
+--help)		opt_help=:					;;
+--version)	func_version					;;
+-*)		func_fatal_help "unrecognized option \`$opt'"	;;
+*)		nonopt="$opt"
+			break
+			;;
+esac
+done
+case $host in
+*cygwin* | *mingw* | *pw32* | *cegcc*)
+# don't eliminate duplications in $postdeps and $predeps
+opt_duplicate_compiler_generated_deps=:
+;;
+*)
+opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+;;
+esac
+# Having warned about all mis-specified options, bail out if
+# anything was wrong.
+$exit_cmd $EXIT_FAILURE
+}
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+if test "$package_revision" != "$macro_revision"; then
+if test "$VERSION" != "$macro_version"; then
+if test -z "$macro_version"; then
+cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+else
+cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+fi
+else
+cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+fi
+exit $EXIT_MISMATCH
+fi
+}
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+$opt_help || {
+# Sanity checks first:
+func_check_version_match
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+func_fatal_configuration "not configured to build any kind of library"
+fi
+test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+# Only execute mode is allowed to have -dlopen flags.
+if test -n "$execute_dlfiles" && test "$mode" != execute; then
+func_error "unrecognized option \`-dlopen'"
+$ECHO "$help" 1>&2
+exit $EXIT_FAILURE
+fi
+# Change the help message to a mode-specific one.
+generic_help="$help"
+help="Try \`$progname --help --mode=$mode' for more information."
+}
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+test -f "$1" &&
+$SED -e 4q "$1" 2>/dev/null \
+| $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+lalib_p=no
+if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+fi
+test "$lalib_p" = yes
+}
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+func_lalib_p "$1"
+}
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+func_ltwrapper_exec_suffix=
+case $1 in
+*.exe) ;;
+*) func_ltwrapper_exec_suffix=.exe ;;
+esac
+$GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+func_ltwrapper_scriptname_result=""
+if func_ltwrapper_executable_p "$1"; then
+	func_dirname_and_basename "$1" "" "."
+	func_stripname '' '.exe' "$func_basename_result"
+	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+fi
+}
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+$opt_debug
+save_ifs=$IFS; IFS='~'
+for cmd in $1; do
+IFS=$save_ifs
+eval cmd=\"$cmd\"
+func_show_eval "$cmd" "${2-:}"
+done
+IFS=$save_ifs
+}
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+$opt_debug
+case $1 in
+*/* | *\\*)	. "$1" ;;
+*)		. "./$1" ;;
+esac
+}
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+$opt_debug
+if test -n "$available_tags" && test -z "$tagname"; then
+CC_quoted=
+for arg in $CC; do
+func_quote_for_eval "$arg"
+	CC_quoted="$CC_quoted $func_quote_for_eval_result"
+done
+case $@ in
+# Blanks in the command may have been stripped by the calling shell,
+# but not from the CC environment variable when configure was run.
+" $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+# Blanks at the start of $base_compile will cause this to fail
+# if we don't check for them as well.
+*)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_quote_for_eval "$arg"
+	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	    done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+esac
+fi
+}
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+write_libobj=${1}
+if test "$build_libtool_libs" = yes; then
+write_lobj=\'${2}\'
+else
+write_lobj=none
+fi
+if test "$build_old_libs" = yes; then
+write_oldobj=\'${3}\'
+else
+write_oldobj=none
+fi
+$opt_dry_run || {
+cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+# Name of the PIC object.
+pic_object=$write_lobj
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+EOF
+$MV "${write_libobj}T" "${write_libobj}"
+}
+}
+# func_mode_compile arg...
+func_mode_compile ()
+{
+$opt_debug
+# Get the compilation command and the source file.
+base_compile=
+srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+suppress_opt=yes
+suppress_output=
+arg_mode=normal
+libobj=
+later=
+pie_flag=
+for arg
+do
+case $arg_mode in
+arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+	-pie | -fpie | -fPIE)
+pie_flag="$pie_flag $arg"
+	  continue
+	  ;;
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
+	  ;;
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_quote_for_eval "$arg"
+	    lastarg="$lastarg $func_quote_for_eval_result"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+	  # Add the arguments to base_compile.
+	  base_compile="$base_compile $lastarg"
+	  continue
+	  ;;
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+esac    #  case $arg_mode
+# Aesthetically quote the previous argument.
+func_quote_for_eval "$lastarg"
+base_compile="$base_compile $func_quote_for_eval_result"
+done # for arg
+case $arg_mode in
+arg)
+func_fatal_error "you must specify an argument for -Xcompile"
+;;
+target)
+func_fatal_error "you must specify a target with \`-o'"
+;;
+*)
+# Get the name of the library object.
+test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+}
+;;
+esac
+# Recognize several different file suffixes.
+# If the user specifies -o file.o, it is replaced with file.lo
+case $libobj in
+*.[cCFSifmso] | \
+*.ada | *.adb | *.ads | *.asm | \
+*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+*.[fF][09]? | *.for | *.java | *.obj | *.sx)
+func_xform "$libobj"
+libobj=$func_xform_result
+;;
+esac
+case $libobj in
+*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+*)
+func_fatal_error "cannot determine name of library object from \`$libobj'"
+;;
+esac
+func_infer_tag $base_compile
+for arg in $later; do
+case $arg in
+-shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+-static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+-prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+-prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+esac
+done
+func_quote_for_eval "$libobj"
+test "X$libobj" != "X$func_quote_for_eval_result" \
+&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+&& func_warning "libobj name \`$libobj' may not contain shell special characters."
+func_dirname_and_basename "$obj" "/" ""
+objname="$func_basename_result"
+xdir="$func_dirname_result"
+lobj=${xdir}$objdir/$objname
+test -z "$base_compile" && \
+func_fatal_help "you must specify a compilation command"
+# Delete any leftover library objects.
+if test "$build_old_libs" = yes; then
+removelist="$obj $lobj $libobj ${libobj}T"
+else
+removelist="$lobj $libobj ${libobj}T"
+fi
+# On Cygwin there's no "real" PIC flag so we must build both object types
+case $host_os in
+cygwin* | mingw* | pw32* | os2* | cegcc*)
+pic_mode=default
+;;
+esac
+if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+# non-PIC code in shared libraries is not supported
+pic_mode=default
+fi
+# Calculate the filename of the output object if compiler does
+# not support -o with -c
+if test "$compiler_c_o" = no; then
+output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+lockfile="$output_obj.lock"
+else
+output_obj=
+need_locks=no
+lockfile=
+fi
+# Lock this critical section if it is needed
+# We use this script file to make the link, it avoids creating a new file
+if test "$need_locks" = yes; then
+until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+done
+elif test "$need_locks" = warn; then
+if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
-}
+fi
+removelist="$removelist $output_obj"
+$ECHO "$srcfile" > "$lockfile"
 fi
-$echo "X$my_tmpdir" | $Xsed
+$opt_dry_run || $RM $removelist
+removelist="$removelist $lockfile"
+trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+if test -n "$fix_srcfile_path"; then
+eval srcfile=\"$fix_srcfile_path\"
+fi
+func_quote_for_eval "$srcfile"
+qsrcfile=$func_quote_for_eval_result
+# Only build a PIC object if we are building libtool libraries.
+if test "$build_libtool_libs" = yes; then
+# Without this assignment, base_compile gets emptied.
+fbsd_hideous_sh_bug=$base_compile
+if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+fi
+func_mkdir_p "$xdir$objdir"
+if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	command="$command -o $lobj"
+fi
+func_show_eval_locale "$command"	\
+'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+but it should contain:
+$srcfile
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+fi
+# Just move the object if needed, then go on to compile the next one
+if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+fi
+# Allow error messages only from the first compilation.
+if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+fi
+fi
+# Only build a position-dependent object if we build old libraries.
+if test "$build_old_libs" = yes; then
+if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+else
+	command="$base_compile $qsrcfile $pic_flag"
+fi
+if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+fi
+# Suppress compiler output if we already did a PIC compilation.
+command="$command$suppress_output"
+func_show_eval_locale "$command" \
+'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+but it should contain:
+$srcfile
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+fi
+# Just move the object if needed
+if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+fi
+fi
+$opt_dry_run || {
+func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+# Unlock the critical section if it was locked
+if test "$need_locks" != no; then
+	removelist=$lockfile
+$RM "$lockfile"
+fi
+}
+exit $EXIT_SUCCESS
 }
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+func_mode_help ()
+{
+# We need to display help for each of the modes.
+case $mode in
+"")
+# Generic help is extracted from the usage comments
+# at the start of this file.
+func_help
+;;
+clean)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+Remove files from the build directory.
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+;;
+compile)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+Compile a source file into a libtool library object.
+This mode accepts the following additional options:
+-o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+-no-suppress      do not suppress compiler output for multiple passes
+-prefer-pic       try to building PIC objects only
+-prefer-non-pic   try to building non-PIC objects only
+-shared           do not build a \`.o' file suitable for static linking
+-static           only build a \`.o' file suitable for static linking
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+;;
+execute)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+Automatically set library path, then run a program.
+This mode accepts the following additional options:
+-dlopen FILE      add the directory containing FILE to the library path
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+Then, COMMAND is executed, with ARGS as arguments."
+;;
+finish)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+Complete the installation of libtool libraries.
+Each LIBDIR is a directory that contains libtool libraries.
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+;;
+install)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+Install executables or libraries.
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+The following components of INSTALL-COMMAND are treated specially:
+-inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+;;
+link)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+Link object files or libraries together to form another library, or to
+create an executable program.
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+The following components of LINK-COMMAND are treated specially:
+-all-static       do not do any dynamic linking at all
+-avoid-version    do not add a version suffix if possible
+-dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+-dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+-export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+-export-symbols SYMFILE
+try to export only the symbols listed in SYMFILE
+-export-symbols-regex REGEX
+try to export only the symbols matching REGEX
+-LLIBDIR          search LIBDIR for required installed libraries
+-lNAME            OUTPUT-FILE requires the installed library libNAME
+-module           build a library that can dlopened
+-no-fast-install  disable the fast-install mode
+-no-install       link a not-installable executable
+-no-undefined     declare that a library does not refer to external symbols
+-o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+-objectlist FILE  Use a list of object files found in FILE to specify objects
+-precious-files-regex REGEX
+don't remove output files matching REGEX
+-release RELEASE  specify package release information
+-rpath LIBDIR     the created library will eventually be installed in LIBDIR
+-R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+-shared           only do dynamic linking of libtool libraries
+-shrext SUFFIX    override the standard shared library file extension
+-static           do not do any dynamic linking of uninstalled libtool libraries
+-static-libtool-libs
+do not do any dynamic linking of libtool libraries
+-version-info CURRENT[:REVISION[:AGE]]
+specify library version info [each variable defaults to 0]
+-weak LIBNAME     declare that the target provides the LIBNAME interface
+All other options (arguments beginning with \`-') are ignored.
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+;;
+uninstall)
+$ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+Remove libraries from an installation directory.
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+;;
+*)
+func_fatal_help "invalid operation mode \`$mode'"
+;;
+esac
+$ECHO
+$ECHO "Try \`$progname --help' for more information about other modes."
+exit $?
+}
+# Now that we've collected a possible --mode arg, show help if necessary
+$opt_help && func_mode_help
+# func_mode_execute arg...
+func_mode_execute ()
+{
+$opt_debug
+# The first argument is the command name.
+cmd="$nonopt"
+test -z "$cmd" && \
+func_fatal_help "you must specify a COMMAND"
+# Handle -dlopen flags immediately.
+for file in $execute_dlfiles; do
+test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+dir=
+case $file in
+*.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+*.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+*)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+esac
+# Get the absolute pathname.
+absdir=`cd "$dir" && pwd`
+test -n "$absdir" && dir="$absdir"
+# Now add the directory to shlibpath_var.
+if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+fi
+done
+# This variable tells wrapper scripts just to set shlibpath_var
+# rather than running their programs.
+libtool_execute_magic="$magic"
+# Check if any of the arguments is a wrapper script.
+args=
+for file
+do
+case $file in
+-*) ;;
+*)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+esac
+# Quote arguments (to preserve shell metacharacters).
+func_quote_for_eval "$file"
+args="$args $func_quote_for_eval_result"
+done
+if test "X$opt_dry_run" = Xfalse; then
+if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+fi
+# Restore saved environment variables
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+$lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+done
+# Now prepare to actually exec the command.
+exec_cmd="\$cmd$args"
+else
+# Display what would be done.
+if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	$ECHO "export $shlibpath_var"
+fi
+$ECHO "$cmd$args"
+exit $EXIT_SUCCESS
+fi
+}
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+# func_mode_finish arg...
+func_mode_finish ()
+{
+$opt_debug
+libdirs="$nonopt"
+admincmds=
+if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+for dir
+do
+	libdirs="$libdirs $dir"
+done
+for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+$cmds"
+	fi
+done
+fi
+# Exit here if they wanted silent mode.
+$opt_silent && exit $EXIT_SUCCESS
+$ECHO "X----------------------------------------------------------------------" | $Xsed
+$ECHO "Libraries have been installed in:"
+for libdir in $libdirs; do
+$ECHO "   $libdir"
+done
+$ECHO
+$ECHO "If you ever happen to want to link against installed libraries"
+$ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+$ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+$ECHO "flag during linking and do at least one of the following:"
+if test -n "$shlibpath_var"; then
+$ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+$ECHO "     during execution"
+fi
+if test -n "$runpath_var"; then
+$ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+$ECHO "     during linking"
+fi
+if test -n "$hardcode_libdir_flag_spec"; then
+libdir=LIBDIR
+eval flag=\"$hardcode_libdir_flag_spec\"
+$ECHO "   - use the \`$flag' linker flag"
+fi
+if test -n "$admincmds"; then
+$ECHO "   - have your system administrator run these commands:$admincmds"
+fi
+if test -f /etc/ld.so.conf; then
+$ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+fi
+$ECHO
+$ECHO "See any operating system documentation about shared libraries for"
+case $host in
+solaris2.[6789]|solaris2.1[0-9])
+$ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
+	;;
+*)
+$ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+;;
+esac
+$ECHO "X----------------------------------------------------------------------" | $Xsed
+exit $EXIT_SUCCESS
+}
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+# func_mode_install arg...
+func_mode_install ()
+{
+$opt_debug
+# There may be an optional sh(1) argument at the beginning of
+# install_prog (especially on Windows NT).
+if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+# Allow the use of GNU shtool's install command.
+$ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+# Aesthetically quote it.
+func_quote_for_eval "$nonopt"
+install_prog="$func_quote_for_eval_result "
+arg=$1
+shift
+else
+install_prog=
+arg=$nonopt
+fi
+# The real first argument should be the name of the installation program.
+# Aesthetically quote it.
+func_quote_for_eval "$arg"
+install_prog="$install_prog$func_quote_for_eval_result"
+# We need to accept at least all the BSD install flags.
+dest=
+files=
+opts=
+prev=
+install_type=
+isdir=no
+stripme=
+for arg
+do
+if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+fi
+case $arg in
+-d) isdir=yes ;;
+-f)
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+-g | -m | -o)
+	prev=$arg
+	;;
+-s)
+	stripme=" -s"
+	continue
+	;;
+-*)
+	;;
+*)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+esac
+# Aesthetically quote the argument.
+func_quote_for_eval "$arg"
+install_prog="$install_prog $func_quote_for_eval_result"
+done
+test -z "$install_prog" && \
+func_fatal_help "you must specify an install program"
+test -n "$prev" && \
+func_fatal_help "the \`$prev' option requires an argument"
+if test -z "$files"; then
+if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+else
+	func_fatal_help "you must specify a destination"
+fi
+fi
+# Strip any trailing slash from the destination.
+func_stripname '' '/' "$dest"
+dest=$func_stripname_result
+# Check to see that the destination is a directory.
+test -d "$dest" && isdir=yes
+if test "$isdir" = yes; then
+destdir="$dest"
+destname=
+else
+func_dirname_and_basename "$dest" "" "."
+destdir="$func_dirname_result"
+destname="$func_basename_result"
+# Not a directory, so check to see that there is only one file specified.
+set dummy $files; shift
+test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+fi
+case $destdir in
+[\\/]* | [A-Za-z]:[\\/]*) ;;
+*)
+for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+done
+;;
+esac
+# This variable tells wrapper scripts just to set variables rather
+# than running their programs.
+libtool_install_magic="$magic"
+staticlibs=
+future_libdirs=
+current_libdirs=
+for file in $files; do
+# Do each installation.
+case $file in
+*.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+*.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	dir="$dir$objdir"
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	  fi
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+*.lo)
+	# Install (i.e. copy) a libtool object.
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+*)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+	  func_source "$wrapper"
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+	  relink_command=
+	  func_source "$wrapper"
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+esac
+done
+for file in $staticlibs; do
+func_basename "$file"
+name="$func_basename_result"
+# Set up the ranlib parameters.
+oldlib="$destdir/$name"
+func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $oldlib" 'exit $?'
+fi
+# Do each command in the postinstall commands.
+func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+done
+test -n "$future_libdirs" && \
+func_warning "remember to run \`$progname --finish$future_libdirs'"
+if test -n "$current_libdirs"; then
+# Maybe just do a dry run.
+$opt_dry_run && current_libdirs=" -n$current_libdirs"
+exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+else
+exit $EXIT_SUCCESS
+fi
+}
+test "$mode" = install && func_mode_install ${1+"$@"}
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+$opt_debug
+my_outputname="$1"
+my_originator="$2"
+my_pic_p="${3-no}"
+my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+my_dlsyms=
+if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+else
+	func_error "not configured to extract global symbols from dlpreopened files"
+fi
+fi
+if test -n "$my_dlsyms"; then
+case $my_dlsyms in
+"") ;;
+*.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+/* External symbol declarations for the compiler. */\
+"
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_verbose "extracting global C symbols from \`$progfile'"
+	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	  done
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+	  $opt_dry_run || {
+	    eval '$ECHO ": $name " >> "$nlist"'
+	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	  }
+	done
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+const char *name;
+void *address;
+} lt_dlsymlist;
+"
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* )
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+runtime relocations are performed -- see ld's documentation
+on pseudo-relocs.  */"
+	    lt_dlsym_const= ;;
+	  *osf5*)
+	    echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+	    lt_dlsym_const= ;;
+	  *)
+	    lt_dlsym_const=const ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+{ \"$my_originator\", (void *) 0 },"
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+{0, (void *) 0}
+};
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  esac
+	done
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+*)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+esac
+else
+# We keep going just in case the user didn't refer to
+# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+# really was required.
+# Nullify the symbol file.
+compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+fi
+}
 # func_win32_libid arg
 # return the library type of file 'arg'
 #
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
 func_win32_libid ()
 {
+$opt_debug
 win32_libid_type="unknown"
 win32_fileres=`file -L $1 2>/dev/null`
 case $win32_fileres in
 *ar\ archive\ import\ library*) # definitely import
 win32_libid_type="x86 archive import"
 ;;
 *ar\ archive*) # could be an import, or static
-if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-$EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+$EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-win32_nmres=`eval $NM -f posix -A $1 | \
+win32_nmres=`eval $NM -f posix -A $1 |
-	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
 case $win32_nmres in
 import*)  win32_libid_type="x86 archive import";;
 *)        win32_libid_type="x86 archive static";;
 esac
 fi
 win32_libid_type="x86 DLL"
 ;;
 esac
 ;;
 esac
-$echo $win32_libid_type
+$ECHO "$win32_libid_type"
 }
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-if test -n "$available_tags" && test -z "$tagname"; then
-CC_quoted=
-for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-done
-case $@ in
-# Blanks in the command may have been stripped by the calling shell,
-# but not from the CC environment variable when configure was run.
-" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-# Blanks at the start of $base_compile will cause this to fail
-# if we don't check for them as well.
-*)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-esac
-fi
-}
 # func_extract_an_archive dir oldlib
 func_extract_an_archive ()
 {
+$opt_debug
 f_ex_an_ar_dir="$1"; shift
 f_ex_an_ar_oldlib="$1"
+func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
-$show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-$run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
 if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
 :
 else
-$echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
-exit $EXIT_FAILURE
 fi
 }
 # func_extract_archives gentop oldlib ...
 func_extract_archives ()
 {
+$opt_debug
 my_gentop="$1"; shift
 my_oldlibs=${1+"$@"}
 my_oldobjs=""
 my_xlib=""
 my_xabs=""
 my_xdir=""
-my_status=""
-$show "${rm}r $my_gentop"
-$run ${rm}r "$my_gentop"
-$show "$mkdir $my_gentop"
-$run $mkdir "$my_gentop"
-my_status=$?
-if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-exit $my_status
-fi
 for my_xlib in $my_oldlibs; do
 # Extract the objects.
 case $my_xlib in
 	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
 	*) my_xabs=`pwd`"/$my_xlib" ;;
 esac
-my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+func_basename "$my_xlib"
-my_xdir="$my_gentop/$my_xlib"
+my_xlib="$func_basename_result"
+my_xlib_u=$my_xlib
-$show "${rm}r $my_xdir"
+while :; do
-$run ${rm}r "$my_xdir"
+case " $extracted_archives " in
-$show "$mkdir $my_xdir"
+	*" $my_xlib_u "*)
-$run $mkdir "$my_xdir"
+	  func_arith $extracted_serial + 1
-exit_status=$?
+	  extracted_serial=$func_arith_result
-if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	exit $exit_status
+	*) break ;;
-fi
+	esac
+done
+extracted_archives="$extracted_archives $my_xlib_u"
+my_xdir="$my_gentop/$my_xlib_u"
+func_mkdir_p "$my_xdir"
 case $host in
 *-darwin*)
-	$show "Extracting $my_xabs"
+	func_verbose "Extracting $my_xabs"
 	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
+	$opt_dry_run || {
 	  darwin_orig_dir=`pwd`
 	  cd $my_xdir || exit $?
 	  darwin_archive=$my_xabs
 	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_base_archive=`basename "$darwin_archive"`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
 	  if test -n "$darwin_arches"; then
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
 	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
 	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
 	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
 	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
 	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
 	    done # $darwin_arches
-## Okay now we have a bunch of thin objects, gotta fatten them up :)
+## Okay now we've a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
 	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
+	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
-	    ${rm}r unfat-$$
+	    $RM -rf unfat-$$
 	    cd "$darwin_orig_dir"
 	  else
-	    cd "$darwin_orig_dir"
+	    cd $darwin_orig_dir
 	    func_extract_an_archive "$my_xdir" "$my_xabs"
 	  fi # $darwin_arches
-	fi # $run
+	} # !$opt_dry_run
 	;;
 *)
 func_extract_an_archive "$my_xdir" "$my_xabs"
-;;
+	;;
 esac
 my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
 done
 func_extract_archives_result="$my_oldobjs"
 }
-# End of Shell function definitions
-#####################################
-# Darwin sucks
+# func_emit_wrapper_part1 [arg=no]
-eval std_shrext=\"$shrext_cmds\"
+#
+# Emit the first part of a libtool wrapper script on stdout.
-disable_libs=no
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
-# Parse our command line options once, thoroughly.
+func_emit_wrapper_part1 ()
-while test "$#" -gt 0
+{
-do
+	func_emit_wrapper_part1_arg1=no
-arg="$1"
+	if test -n "$1" ; then
-shift
+	  func_emit_wrapper_part1_arg1=$1
+	fi
-case $arg in
--*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+	$ECHO "\
-*) optarg= ;;
+#! $SHELL
-esac
+# $output - temporary wrapper script for $objdir/$outputname
-# If the previous option needs an argument, assign it.
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-if test -n "$prev"; then
+#
-case $prev in
+# The $output program cannot be directly executed until all the libtool
-execute_dlfiles)
+# libraries that it depends on are installed.
-execute_dlfiles="$execute_dlfiles $arg"
+#
-;;
+# This wrapper script should never be moved out of the build directory.
-tag)
+# If it is, it will not operate correctly.
-tagname="$arg"
-preserve_args="${preserve_args}=$arg"
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
-# Check whether tagname contains only valid characters
+Xsed='${SED} -e 1s/^X//'
-case $tagname in
+sed_quote_subst='$sed_quote_subst'
-*[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
+# Be Bourne compatible
-	exit $EXIT_FAILURE
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-	;;
+emulate sh
+NULLCMD=:
+# Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+# is contrary to our usage.  Disable this feature.
+alias -g '\${1+\"\$@\"}'='\"\$@\"'
+setopt NO_GLOB_SUBST
+else
+case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+relink_command=\"$relink_command\"
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+# install mode needs the following variables:
+generated_by_libtool_version='$macro_version'
+notinst_deplibs='$notinst_deplibs'
+else
+# When we are sourced in execute mode, \$file and \$ECHO are already set.
+if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ECHO=\"$qecho\"
+file=\"\$0\"
+# Make sure echo works.
+if test \"X\$1\" = X--no-reexec; then
+# Discard the --no-reexec flag, and continue.
+shift
+elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+# Yippee, \$ECHO works!
+:
+else
+# Restart under the correct shell, and then maybe \$ECHO will work.
+exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+fi
+fi\
+"
+	$ECHO "\
+# Find the directory that this script lives in.
+thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+# Follow symbolic links until we get to the real thisdir.
+file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+while test -n \"\$file\"; do
+destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+# If there was a directory component, then change thisdir.
+if test \"x\$destdir\" != \"x\$file\"; then
+case \"\$destdir\" in
+[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+*) thisdir=\"\$thisdir/\$destdir\" ;;
 esac
+fi
-case $tagname in
-CC)
+file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-	# Don't test for the "default" C tag, as we know, it's there, but
+file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-	# not specially marked.
+done
-	;;
+"
-*)
+}
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+# end: func_emit_wrapper_part1
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
+# func_emit_wrapper_part2 [arg=no]
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+#
-	else
+# Emit the second part of a libtool wrapper script on stdout.
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
 	fi
-	;;
-esac
+	$ECHO "\
-;;
-*)
+# Usually 'no', except on cygwin/mingw when embedded into
-eval "$prev=\$arg"
+# the cwrapper.
-;;
+WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
-esac
+if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+# special case for '.'
-prev=
+if test \"\$thisdir\" = \".\"; then
-prevopt=
+thisdir=\`pwd\`
-continue
-fi
-# Have we seen a non-optional argument yet?
-case $arg in
---help)
-show_help=yes
-;;
---version)
-$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
-$echo
-$echo "Copyright (C) 2005  Free Software Foundation, Inc."
-$echo "This is free software; see the source for copying conditions.  There is NO"
-$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-exit $?
-;;
---config)
-${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-# Now print the configurations for the tags.
-for tagname in $taglist; do
-${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-done
-exit $?
-;;
---debug)
-$echo "$progname: enabling shell trace mode"
-set -x
-preserve_args="$preserve_args $arg"
-;;
---dry-run | -n)
-run=:
-;;
---features)
-$echo "host: $host"
-if test "$build_libtool_libs" = yes; then
-$echo "enable shared libraries"
-else
-$echo "disable shared libraries"
 fi
-if test "$build_old_libs" = yes; then
+# remove .libs from thisdir
-$echo "enable static libraries"
+case \"\$thisdir\" in
-else
+*[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
-$echo "disable static libraries"
+$objdir )   thisdir=. ;;
-fi
-exit $?
-;;
---finish) mode="finish" ;;
---mode) prevopt="--mode" prev=mode ;;
---mode=*) mode="$optarg" ;;
---preserve-dup-deps) duplicate_deps="yes" ;;
---quiet | --silent)
-show=:
-preserve_args="$preserve_args $arg"
-;;
---tag)
-prevopt="--tag"
-prev=tag
-preserve_args="$preserve_args --tag"
-;;
---tag=*)
-set tag "$optarg" ${1+"$@"}
-shift
-prev=tag
-preserve_args="$preserve_args --tag"
-;;
--dlopen)
-prevopt="-dlopen"
-prev=execute_dlfiles
-;;
--*)
-$echo "$modename: unrecognized option \`$arg'" 1>&2
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-;;
-*)
-nonopt="$arg"
-break
-;;
-esac
-done
-if test -n "$prevopt"; then
-$echo "$modename: option \`$prevopt' requires an argument" 1>&2
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
-case $disable_libs in
-no)
-;;
-shared)
-build_libtool_libs=no
-build_old_libs=yes
-;;
-static)
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-;;
-esac
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-if test -z "$show_help"; then
-# Infer the operation mode.
-if test -z "$mode"; then
-$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-$echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-case $nonopt in
-*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-mode=link
-for arg
-do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-done
-;;
-*db | *dbx | *strace | *truss)
-mode=execute
-;;
-*install*|cp|mv)
-mode=install
-;;
-*rm)
-mode=uninstall
-;;
-*)
-# If we have no mode, but dlfiles were specified, then do execute mode.
-test -n "$execute_dlfiles" && mode=execute
-# Just use the default operation mode.
-if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-fi
-;;
 esac
 fi
-# Only execute mode is allowed to have -dlopen flags.
+# Try to get the absolute directory name.
-if test -n "$execute_dlfiles" && test "$mode" != execute; then
+absdir=\`cd \"\$thisdir\" && pwd\`
-$echo "$modename: unrecognized option \`-dlopen'" 1>&2
+test -n \"\$absdir\" && thisdir=\"\$absdir\"
-$echo "$help" 1>&2
+"
-exit $EXIT_FAILURE
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+program=lt-'$outputname'$exeext
+progdir=\"\$thisdir/$objdir\"
+if test ! -f \"\$progdir/\$program\" ||
+{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+file=\"\$\$-\$program\"
+if test ! -d \"\$progdir\"; then
+$MKDIR \"\$progdir\"
+else
+$RM \"\$progdir/\$file\"
+fi"
+	  $ECHO "\
+# relink executable if necessary
+if test -n \"\$relink_command\"; then
+if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+fi
+fi
+$MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+{ $RM \"\$progdir/\$program\";
+$MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+$RM \"\$progdir/\$file\"
+fi"
+	else
+	  $ECHO "\
+program='$outputname'
+progdir=\"\$thisdir/$objdir\"
+"
+	fi
+	$ECHO "\
+if test -f \"\$progdir/\$program\"; then"
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+# Add our own library path to $shlibpath_var
+$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+# Some systems cannot cope with colon-terminated $shlibpath_var
+# The second colon is a workaround for a bug in BeOS R4 sed
+$shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+export $shlibpath_var
+"
+	fi
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+# Add the dll search path components to the executable PATH
+PATH=$dllsearchpath:\$PATH
+"
+	fi
+	$ECHO "\
+if test \"\$libtool_execute_magic\" != \"$magic\"; then
+# Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	*)
+	  $ECHO "\
+exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$ECHO "\
+\$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+exit 1
+fi
+else
+# The program doesn't exist.
+\$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+exit 1
 fi
+fi\
-# Change the help message to a mode-specific one.
+"
-generic_help="$help"
+}
-help="Try \`$modename --help --mode=$mode' for more information."
+# end: func_emit_wrapper_part2
-# These modes are in order of execution frequency so that they run quickly.
-case $mode in
+# func_emit_wrapper [arg=no]
-# libtool compile mode
+#
-compile)
+# Emit a libtool wrapper script on stdout.
-modename="$modename: compile"
+# Don't directly open a file because we may want to
-# Get the compilation command and the source file.
+# incorporate the script contents within a cygwin/mingw
-base_compile=
+# wrapper executable.  Must ONLY be called from within
-srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+# func_mode_link because it depends on a number of variables
-suppress_opt=yes
+# set therein.
-suppress_output=
+#
-arg_mode=normal
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-libobj=
+# variable will take.  If 'yes', then the emitted script
-later=
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
-for arg
+# behavior.
-do
+func_emit_wrapper ()
-case $arg_mode in
+{
-arg  )
+	func_emit_wrapper_arg1=no
-	# do not "continue".  Instead, add this to base_compile
+	if test -n "$1" ; then
-	lastarg="$arg"
+	  func_emit_wrapper_arg1=$1
-	arg_mode=normal
+	fi
-	;;
+	# split this up so that func_emit_cwrapperexe_src
-target )
+	# can call each part independently.
-	libobj="$arg"
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-	arg_mode=normal
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-	continue
+}
-	;;
-normal )
+# func_to_host_path arg
-	# Accept any command-line options.
+#
-	case $arg in
+# Convert paths to host format when used with build tools.
-	-o)
+# Intended for use with "native" mingw (where libtool itself
-	  if test -n "$libobj" ; then
+# is running under the msys shell), or in the following cross-
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+# build environments:
-	    exit $EXIT_FAILURE
+#    $build          $host
-	  fi
+#    mingw (msys)    mingw  [e.g. native]
-	  arg_mode=target
+#    cygwin          mingw
-	  continue
+#    *nix + wine     mingw
-	  ;;
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
-	-static | -prefer-pic | -prefer-non-pic)
+# converts paths for any non-msys applications it launches,
-	  later="$later $arg"
+# but that facility isn't available from inside the cwrapper.
-	  continue
+# Similar accommodations are necessary for $host mingw and
-	  ;;
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
-	-no-suppress)
+#
-	  suppress_opt=no
+# ARG is the path (on $build) that should be converted to
-	  continue
+# the proper representation for $host. The result is stored
-	  ;;
+# in $func_to_host_path_result.
+func_to_host_path ()
-	-Xcompiler)
+{
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+func_to_host_path_result="$1"
-	  continue      #  The current "srcfile" will either be retained or
+if test -n "$1" ; then
-	  ;;            #  replaced later.  I would guess that would be a bug.
+case $host in
+*mingw* )
-	-Wc,*)
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+case $build in
-	  lastarg=
+*mingw* ) # actually, msys
-	  save_ifs="$IFS"; IFS=','
+# awkward: cmd appends spaces to result
-	  for arg in $args; do
+lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-	    IFS="$save_ifs"
+func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+$SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-	    # Double-quote args containing other shell metacharacters.
+func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-	    # Many Bourne shells cannot handle close brackets correctly
+$SED -e "$lt_sed_naive_backslashify"`
-	    # in scan sets, so we specify it separately.
+;;
-	    case $arg in
+*cygwin* )
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+func_to_host_path_tmp1=`cygpath -w "$1"`
-	      arg="\"$arg\""
+func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-	      ;;
+$SED -e "$lt_sed_naive_backslashify"`
+;;
+* )
+# Unfortunately, winepath does not exit with a non-zero
+# error code, so we are forced to check the contents of
+# stdout. On the other hand, if the command is not
+# found, the shell will set an exit code of 127 and print
+# *an error message* to stdout. So we must check for both
+# error code of zero AND non-empty stdout, which explains
+# the odd construction:
+func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+$SED -e "$lt_sed_naive_backslashify"`
+else
+# Allow warning below.
+func_to_host_path_result=""
+fi
+;;
+esac
+if test -z "$func_to_host_path_result" ; then
+func_error "Could not determine host path corresponding to"
+func_error "  '$1'"
+func_error "Continuing, but uninstalled executables may not work."
+# Fallback:
+func_to_host_path_result="$1"
+fi
+;;
+esac
+fi
+}
+# end: func_to_host_path
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+func_to_host_pathlist_result="$1"
+if test -n "$1" ; then
+case $host in
+*mingw* )
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+# Remove leading and trailing path separator characters from
+# ARG. msys behavior is inconsistent here, cygpath turns them
+# into '.;' and ';.', and winepath ignores them completely.
+func_to_host_pathlist_tmp2="$1"
+# Once set for this call, this variable should not be
+# reassigned. It is used in tha fallback case.
+func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+$SED -e 's|^:*||' -e 's|:*$||'`
+case $build in
+*mingw* ) # Actually, msys.
+# Awkward: cmd appends spaces to result.
+lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+$SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+$SED -e "$lt_sed_naive_backslashify"`
+;;
+*cygwin* )
+func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+$SED -e "$lt_sed_naive_backslashify"`
+;;
+* )
+# unfortunately, winepath doesn't convert pathlists
+func_to_host_pathlist_result=""
+func_to_host_pathlist_oldIFS=$IFS
+IFS=:
+for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+IFS=$func_to_host_pathlist_oldIFS
+if test -n "$func_to_host_pathlist_f" ; then
+func_to_host_path "$func_to_host_pathlist_f"
+if test -n "$func_to_host_path_result" ; then
+if test -z "$func_to_host_pathlist_result" ; then
+func_to_host_pathlist_result="$func_to_host_path_result"
+else
+func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+fi
+fi
+fi
+IFS=:
+done
+IFS=$func_to_host_pathlist_oldIFS
+;;
+esac
+if test -z "$func_to_host_pathlist_result" ; then
+func_error "Could not determine the host path(s) corresponding to"
+func_error "  '$1'"
+func_error "Continuing, but uninstalled executables may not work."
+# Fallback. This may break if $1 contains DOS-style drive
+# specifications. The fix is not to complicate the expression
+# below, but for the user to provide a working wine installation
+# with winepath so that path translation in the cross-to-mingw
+# case works properly.
+lt_replace_pathsep_nix_to_dos="s|:|;|g"
+func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+$SED -e "$lt_replace_pathsep_nix_to_dos"`
+fi
+# Now, add the leading and trailing path separators back
+case "$1" in
+:* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+;;
+esac
+case "$1" in
+*: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+;;
+esac
+;;
+esac
+fi
+}
+# end: func_to_host_pathlist
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+The $output program cannot be directly executed until all the libtool
+libraries that it depends on are installed.
+This wrapper executable should never be moved out of the build directory.
+If it is, it will not operate correctly.
+Currently, it simply execs the wrapper *script* "$SHELL $output",
+but could eventually absorb all of the scripts functionality and
+exec $objdir/$outputname directly.
+*/
+EOF
+	    cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+va_list args;
+va_start (args, fmt);
+(void) vfprintf (stderr, fmt, args);
+va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+const char *program_name = NULL;
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+static const char *script_text_part1 =
+EOF
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+	    if test -n "$dllsearchpath"; then
+func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+	    cat <<"EOF"
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+/* argument is putenv-style "foo=bar", value of foo is set to bar */
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+/* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+/* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+int
+main (int argc, char *argv[])
+{
+char **newargz;
+int  newargc;
+char *tmp_pathspec;
+char *actual_cwrapper_path;
+char *actual_cwrapper_name;
+char *target_name;
+char *lt_argv_zero;
+intptr_t rval = 127;
+int i;
+program_name = (char *) xstrdup (base_name (argv[0]));
+LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+/* very simple arg parsing; don't want to rely on getopt */
+for (i = 1; i < argc; i++)
+{
+if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
+	  return 0;
+	}
+}
+newargz = XMALLOC (char *, argc + 1);
+tmp_pathspec = find_executable (argv[0]);
+if (tmp_pathspec == NULL)
+lt_fatal ("Couldn't find %s", argv[0]);
+LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
+actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
+XFREE (tmp_pathspec);
+actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+strendzap (actual_cwrapper_path, actual_cwrapper_name);
+/* wrapper name transforms */
+strendzap (actual_cwrapper_name, ".exe");
+tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+XFREE (actual_cwrapper_name);
+actual_cwrapper_name = tmp_pathspec;
+tmp_pathspec = 0;
+/* target_name transforms -- use actual target program name; might have lt- prefix */
+target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+strendzap (target_name, ".exe");
+tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+XFREE (target_name);
+target_name = tmp_pathspec;
+tmp_pathspec = 0;
+LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
+EOF
+	    cat <<EOF
+newargz[0] =
+XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+strcpy (newargz[0], actual_cwrapper_path);
+strcat (newargz[0], "$objdir");
+strcat (newargz[0], "/");
+EOF
+	    cat <<"EOF"
+/* stop here, and copy so we don't have to do this twice */
+tmp_pathspec = xstrdup (newargz[0]);
+/* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+strcat (newargz[0], actual_cwrapper_name);
+/* DO want the lt- prefix here if it exists, so use target_name */
+lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+XFREE (tmp_pathspec);
+tmp_pathspec = NULL;
+EOF
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+{
+char* p;
+while ((p = strchr (newargz[0], '\\')) != NULL)
+{
+	*p = '/';
+}
+while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+{
+	*p = '/';
+}
+}
+EOF
+	    ;;
 	    esac
-	    lastarg="$lastarg $arg"
-	  done
+	    cat <<"EOF"
-	  IFS="$save_ifs"
+XFREE (target_name);
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+XFREE (actual_cwrapper_path);
+XFREE (actual_cwrapper_name);
-	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
+lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
-	  continue
+lt_setenv ("DUALCASE", "1");  /* for MSK sh */
-	  ;;
+lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
-	* )
-	  # Accept the current argument as the source file.
+newargc=0;
-	  # The previous "srcfile" becomes the current argument.
+for (i = 1; i < argc; i++)
-	  #
+{
-	  lastarg="$srcfile"
+if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-	  srcfile="$arg"
+{
-	  ;;
+if (argv[i][env_set_opt_len] == '=')
-	esac  #  case $arg
+{
-	;;
+const char *p = argv[i] + env_set_opt_len + 1;
-esac    #  case $arg_mode
+lt_opt_process_env_set (p);
+}
-# Aesthetically quote the previous argument.
+else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+{
+lt_opt_process_env_set (argv[++i]); /* don't copy */
-case $lastarg in
+}
-# Double-quote args containing other shell metacharacters.
+else
-# Many Bourne shells cannot handle close brackets correctly
+lt_fatal ("%s missing required argument", env_set_opt);
-# in scan sets, and some SunOS ksh mistreat backslash-escaping
+continue;
-# in scan sets (worked around with variable expansion),
+}
-# and furthermore cannot handle '|' '&' '(' ')' in scan sets
+if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-# at all, so we specify them separately.
+{
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+if (argv[i][env_prepend_opt_len] == '=')
-	lastarg="\"$lastarg\""
+{
-	;;
+const char *p = argv[i] + env_prepend_opt_len + 1;
-esac
+lt_opt_process_env_prepend (p);
+}
-base_compile="$base_compile $lastarg"
+else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-done # for arg
+{
+lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-case $arg_mode in
+}
-arg)
+else
-$echo "$modename: you must specify an argument for -Xcompile"
+lt_fatal ("%s missing required argument", env_prepend_opt);
-exit $EXIT_FAILURE
+continue;
-;;
+}
-target)
+if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-$echo "$modename: you must specify a target with \`-o'" 1>&2
+{
-exit $EXIT_FAILURE
+if (argv[i][env_append_opt_len] == '=')
-;;
+{
-*)
+const char *p = argv[i] + env_append_opt_len + 1;
-# Get the name of the library object.
+lt_opt_process_env_append (p);
-[ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+}
-;;
+else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-esac
+{
+lt_opt_process_env_append (argv[++i]); /* don't copy */
-# Recognize several different file suffixes.
+}
-# If the user specifies -o file.o, it is replaced with file.lo
+else
-xform='[cCFSifmso]'
+lt_fatal ("%s missing required argument", env_append_opt);
-case $libobj in
+continue;
-*.ada) xform=ada ;;
+}
-*.adb) xform=adb ;;
+if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-*.ads) xform=ads ;;
+{
-*.asm) xform=asm ;;
+/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-*.c++) xform=c++ ;;
+namespace, but it is not one of the ones we know about and
-*.cc) xform=cc ;;
+have already dealt with, above (inluding dump-script), then
-*.ii) xform=ii ;;
+report an error. Otherwise, targets might begin to believe
-*.class) xform=class ;;
+they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-*.cpp) xform=cpp ;;
+namespace. The first time any user complains about this, we'll
-*.cxx) xform=cxx ;;
+need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-*.f90) xform=f90 ;;
+or a configure.ac-settable value.
-*.for) xform=for ;;
+*/
-*.java) xform=java ;;
+lt_fatal ("Unrecognized option in %s namespace: '%s'",
-esac
+ltwrapper_option_prefix, argv[i]);
+}
-libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+/* otherwise ... */
+newargz[++newargc] = xstrdup (argv[i]);
-case $libobj in
+}
-*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+newargz[++newargc] = NULL;
-*)
-$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
-exit $EXIT_FAILURE
+for (i = 0; i < newargc; i++)
-;;
+{
-esac
+LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+}
-func_infer_tag $base_compile
-for arg in $later; do
-case $arg in
--static)
-	build_old_libs=yes
-	continue
-	;;
--prefer-pic)
-	pic_mode=yes
-	continue
-	;;
--prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-esac
-done
-qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-case $qlibobj in
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-esac
-test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-if test "X$xdir" = "X$obj"; then
-xdir=
-else
-xdir=$xdir/
-fi
-lobj=${xdir}$objdir/$objname
-if test -z "$base_compile"; then
-$echo "$modename: you must specify a compilation command" 1>&2
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
-# Delete any leftover library objects.
-if test "$build_old_libs" = yes; then
-removelist="$obj $lobj $libobj ${libobj}T"
-else
-removelist="$lobj $libobj ${libobj}T"
-fi
-$run $rm $removelist
-trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-# On Cygwin there's no "real" PIC flag so we must build both object types
-case $host_os in
-cygwin* | mingw* | pw32* | os2*)
-pic_mode=default
-;;
-esac
-if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-# non-PIC code in shared libraries is not supported
-pic_mode=default
-fi
-# Calculate the filename of the output object if compiler does
-# not support -o with -c
-if test "$compiler_c_o" = no; then
-output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-lockfile="$output_obj.lock"
-removelist="$removelist $output_obj $lockfile"
-trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-else
-output_obj=
-need_locks=no
-lockfile=
-fi
-# Lock this critical section if it is needed
-# We use this script file to make the link, it avoids creating a new file
-if test "$need_locks" = yes; then
-until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-done
-elif test "$need_locks" = warn; then
-if test -f "$lockfile"; then
-	$echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-fi
-$echo "$srcfile" > "$lockfile"
-fi
-if test -n "$fix_srcfile_path"; then
-eval srcfile=\"$fix_srcfile_path\"
-fi
-qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-case $qsrcfile in
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-qsrcfile="\"$qsrcfile\"" ;;
-esac
-$run $rm "$libobj" "${libobj}T"
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-# Name of the PIC object.
 EOF
-# Only build a PIC object if we are building libtool libraries.
+	    case $host_os in
-if test "$build_libtool_libs" = yes; then
+	      mingw*)
-# Without this assignment, base_compile gets emptied.
+		cat <<"EOF"
-fbsd_hideous_sh_bug=$base_compile
+/* execv doesn't actually work on mingw as expected on unix */
+rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
-if test "$pic_mode" != no; then
+if (rval == -1)
-	command="$base_compile $qsrcfile $pic_flag"
+{
+/* failed to start process */
+LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+return 127;
+}
+return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+execv (lt_argv_zero, newargz);
+return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+	    cat <<"EOF"
+}
+void *
+xmalloc (size_t num)
+{
+void *p = (void *) malloc (num);
+if (!p)
+lt_fatal ("Memory exhausted");
+return p;
+}
+char *
+xstrdup (const char *string)
+{
+return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+const char *
+base_name (const char *name)
+{
+const char *base;
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+/* Skip over the disk name in MSDOS pathnames. */
+if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+name += 2;
+#endif
+for (base = name; *name; name++)
+if (IS_DIR_SEPARATOR (*name))
+base = name + 1;
+return base;
+}
+int
+check_executable (const char *path)
+{
+struct stat st;
+LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+if ((!path) || (!*path))
+return 0;
+if ((stat (path, &st) >= 0)
+&& (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+return 1;
+else
+return 0;
+}
+int
+make_executable (const char *path)
+{
+int rval = 0;
+struct stat st;
+LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+if ((!path) || (!*path))
+return 0;
+if (stat (path, &st) >= 0)
+{
+rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+}
+return rval;
+}
+/* Searches for the full path of the wrapper.  Returns
+newly allocated full path name if found, NULL otherwise
+Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+int has_slash = 0;
+const char *p;
+const char *p_next;
+/* static buffer for getcwd */
+char tmp[LT_PATHMAX + 1];
+int tmp_len;
+char *concat_name;
+LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+if ((wrapper == NULL) || (*wrapper == '\0'))
+return NULL;
+/* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+{
+concat_name = xstrdup (wrapper);
+if (check_executable (concat_name))
+	return concat_name;
+XFREE (concat_name);
+}
+else
+{
+#endif
+if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+}
+#endif
+for (p = wrapper; *p; p++)
+if (*p == '/')
+{
+	has_slash = 1;
+	break;
+}
+if (!has_slash)
+{
+/* no slashes; search PATH */
+const char *path = getenv ("PATH");
+if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal ("getcwd failed");
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+/* not found in PATH; assume curdir */
+}
+/* Relative path | not found in path: prepend cwd */
+if (getcwd (tmp, LT_PATHMAX) == NULL)
+lt_fatal ("getcwd failed");
+tmp_len = strlen (tmp);
+concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+memcpy (concat_name, tmp, tmp_len);
+concat_name[tmp_len] = '/';
+strcpy (concat_name + tmp_len + 1, wrapper);
+if (check_executable (concat_name))
+return concat_name;
+XFREE (concat_name);
+return NULL;
+}
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+return xstrdup (pathspec);
+#else
+char buf[LT_PATHMAX];
+struct stat s;
+char *tmp_pathspec = xstrdup (pathspec);
+char *p;
+int has_symlinks = 0;
+while (strlen (tmp_pathspec) && !has_symlinks)
+{
+LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
+if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
 else
-	# Don't build PIC code
+	{
-	command="$base_compile $qsrcfile"
+	  char *errstr = strerror (errno);
-fi
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	}
-if test ! -d "${xdir}$objdir"; then
+}
-	$show "$mkdir ${xdir}$objdir"
+XFREE (tmp_pathspec);
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
+if (!has_symlinks)
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+{
-	  exit $exit_status
+return xstrdup (pathspec);
-	fi
+}
-fi
+tmp_pathspec = realpath (pathspec, buf);
-if test -z "$output_obj"; then
+if (tmp_pathspec == 0)
-	# Place PIC objects in $objdir
+{
-	command="$command -o $lobj"
+lt_fatal ("Could not follow symlinks for %s", pathspec);
-fi
+}
+return xstrdup (tmp_pathspec);
-$run $rm "$lobj" "$output_obj"
+#endif
+}
-$show "$command"
-if $run eval "$command"; then :
+char *
+strendzap (char *str, const char *pat)
+{
+size_t len, patlen;
+assert (str != NULL);
+assert (pat != NULL);
+len = strlen (str);
+patlen = strlen (pat);
+if (patlen <= len)
+{
+str += len - patlen;
+if (strcmp (str, pat) == 0)
+	*str = '\0';
+}
+return str;
+}
+static void
+lt_error_core (int exit_status, const char *mode,
+	       const char *message, va_list ap)
+{
+fprintf (stderr, "%s: %s: ", program_name, mode);
+vfprintf (stderr, message, ap);
+fprintf (stderr, ".\n");
+if (exit_status >= 0)
+exit (exit_status);
+}
+void
+lt_fatal (const char *message, ...)
+{
+va_list ap;
+va_start (ap, message);
+lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+va_end (ap);
+}
+void
+lt_setenv (const char *name, const char *value)
+{
+LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+(name ? name : "<NULL>"),
+(value ? value : "<NULL>")));
+{
+#ifdef HAVE_SETENV
+/* always make a copy, for consistency with !HAVE_SETENV */
+char *str = xstrdup (value);
+setenv (name, str, 1);
+#else
+int len = strlen (name) + 1 + strlen (value) + 1;
+char *str = XMALLOC (char, len);
+sprintf (str, "%s=%s", name, value);
+if (putenv (str) != EXIT_SUCCESS)
+{
+XFREE (str);
+}
+#endif
+}
+}
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+char *new_value;
+if (orig_value && *orig_value)
+{
+int orig_value_len = strlen (orig_value);
+int add_len = strlen (add);
+new_value = XMALLOC (char, add_len + orig_value_len + 1);
+if (to_end)
+{
+strcpy (new_value, orig_value);
+strcpy (new_value + orig_value_len, add);
+}
 else
-	test -n "$output_obj" && $run $rm $removelist
+{
-	exit $EXIT_FAILURE
+strcpy (new_value, add);
-fi
+strcpy (new_value + add_len, orig_value);
+}
-if test "$need_locks" = warn &&
+}
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+else
-	$echo "\
+{
-*** ERROR, $lockfile contains:
+new_value = xstrdup (add);
-`cat $lockfile 2>/dev/null`
+}
+return new_value;
-but it should contain:
+}
-$srcfile
+int
-This indicates that another process is trying to use the same
+lt_split_name_value (const char *arg, char** name, char** value)
-temporary object file, and libtool could not work around it because
+{
-your compiler does not support \`-c' and \`-o' together.  If you
+const char *p;
-repeat this compilation, it may succeed, by chance, but you had better
+int len;
-avoid parallel builds (make -j) in this platform, or get a better
+if (!arg || !*arg)
-compiler."
+return 1;
-	$run $rm $removelist
+p = strchr (arg, (int)'=');
-	exit $EXIT_FAILURE
-fi
+if (!p)
+return 1;
-# Just move the object if needed, then go on to compile the next one
-if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+*value = xstrdup (++p);
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
+len = strlen (arg) - strlen (*value);
-	else
+*name = XMALLOC (char, len);
-	  error=$?
+strncpy (*name, arg, len-1);
-	  $run $rm $removelist
+(*name)[len - 1] = '\0';
-	  exit $error
-	fi
+return 0;
-fi
+}
-# Append the name of the PIC object to the libtool object file.
+void
-test -z "$run" && cat >> ${libobj}T <<EOF
+lt_opt_process_env_set (const char *arg)
-pic_object='$objdir/$objname'
+{
+char *name = NULL;
+char *value = NULL;
+if (lt_split_name_value (arg, &name, &value) != 0)
+{
+XFREE (name);
+XFREE (value);
+lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+}
+lt_setenv (name, value);
+XFREE (name);
+XFREE (value);
+}
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+char *name = NULL;
+char *value = NULL;
+char *new_value = NULL;
+if (lt_split_name_value (arg, &name, &value) != 0)
+{
+XFREE (name);
+XFREE (value);
+lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+}
+new_value = lt_extend_str (getenv (name), value, 0);
+lt_setenv (name, new_value);
+XFREE (new_value);
+XFREE (name);
+XFREE (value);
+}
+void
+lt_opt_process_env_append (const char *arg)
+{
+char *name = NULL;
+char *value = NULL;
+char *new_value = NULL;
+if (lt_split_name_value (arg, &name, &value) != 0)
+{
+XFREE (name);
+XFREE (value);
+lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+}
+new_value = lt_extend_str (getenv (name), value, 1);
+lt_setenv (name, new_value);
+XFREE (new_value);
+XFREE (name);
+XFREE (value);
+}
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+(name ? name : "<NULL>"),
+(value ? value : "<NULL>")));
+if (name && *name && value && *value)
+{
+char *new_value = lt_extend_str (getenv (name), value, 0);
+/* some systems can't cope with a ':'-terminated path #' */
+int len = strlen (new_value);
+while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+{
+new_value[len-1] = '\0';
+}
+lt_setenv (name, new_value);
+XFREE (new_value);
+}
+}
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+(name ? name : "<NULL>"),
+(value ? value : "<NULL>")));
+if (name && *name && value && *value)
+{
+char *new_value = lt_extend_str (getenv (name), value, 0);
+lt_setenv (name, new_value);
+XFREE (new_value);
+}
+}
 EOF
+}
-# Allow error messages only from the first compilation.
+# end: func_emit_cwrapperexe_src
-if test "$suppress_opt" = yes; then
-suppress_output=' >/dev/null 2>&1'
+# func_mode_link arg...
-fi
+func_mode_link ()
-else
+{
-# No PIC object so indicate it doesn't exist in the libtool
+$opt_debug
-# object file.
-test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-EOF
-fi
-# Only build a position-dependent object if we build old libraries.
-if test "$build_old_libs" = yes; then
-if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-else
-	command="$base_compile $qsrcfile $pic_flag"
-fi
-if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-fi
-# Suppress compiler output if we already did a PIC compilation.
-command="$command$suppress_output"
-$run $rm "$obj" "$output_obj"
-$show "$command"
-if $run eval "$command"; then :
-else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-fi
-if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-but it should contain:
-$srcfile
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-fi
-# Just move the object if needed
-if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-fi
-# Append the name of the non-PIC object the libtool object file.
-# Only append if the libtool object file exists.
-test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-EOF
-else
-# Append the name of the non-PIC object the libtool object file.
-# Only append if the libtool object file exists.
-test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-EOF
-fi
-$run $mv "${libobj}T" "${libobj}"
-# Unlock the critical section if it was locked
-if test "$need_locks" != no; then
-$run $rm "$lockfile"
-fi
-exit $EXIT_SUCCESS
-;;
-# libtool link mode
-link | relink)
-modename="$modename: link"
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
 # It is impossible to link a dll without this setting, and
 # we shouldn't force the makefile maintainer to figure out
 # which system we are compiling for in order to pass an extra
 # flag for every libtool invocation.
 # allow_undefined=no
 ;;
 *)
 allow_undefined=yes
 ;;
 esac
-libtool_args="$nonopt"
+libtool_args=$nonopt
 base_compile="$nonopt $@"
-compile_command="$nonopt"
+compile_command=$nonopt
-finalize_command="$nonopt"
+finalize_command=$nonopt
 compile_rpath=
 finalize_rpath=
 compile_shlibpath=
 finalize_shlibpath=
 compiler_flags=
 linker_flags=
 dllsearchpath=
 lib_search_path=`pwd`
 inst_prefix_dir=
+new_inherited_linker_flags=
 avoid_version=no
 dlfiles=
 dlprefiles=
 dlself=no
 ltlibs=
 module=no
 no_install=no
 objs=
 non_pic_objects=
-notinst_path= # paths that contain not-installed libtool libraries
 precious_files_regex=
 prefer_static_libs=no
 preload=no
 prev=
 prevarg=
 perm_rpath=
 temp_rpath=
 thread_safe=no
 vinfo=
 vinfo_number=no
+weak_libs=
+single_module="${wl}-single_module"
 func_infer_tag $base_compile
 # We need to know -static, to get the right output filenames.
 for arg
 do
 case $arg in
--all-static | -static)
+-shared)
-	if test "X$arg" = "X-all-static"; then
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+-all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	    func_warning "complete static linking is impossible in this configuration"
 	  fi
 	  if test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
-	else
+	  ;;
+	-static)
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built
-	fi
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
 	build_libtool_libs=no
 	build_old_libs=yes
 	break
 	;;
 esac
 # Go through the arguments, transforming them on the way.
 while test "$#" -gt 0; do
 arg="$1"
 shift
-case $arg in
+func_quote_for_eval "$arg"
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+qarg=$func_quote_for_eval_unquoted_result
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+func_append libtool_args " $func_quote_for_eval_result"
-	;;
-*) qarg=$arg ;;
-esac
-libtool_args="$libtool_args $qarg"
 # If the previous option needs an argument, assign it.
 if test -n "$prev"; then
 	case $prev in
 	output)
-	  compile_command="$compile_command @OUTPUT@"
+	  func_append compile_command " @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
 	  ;;
 	esac
 	case $prev in
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
+	    func_append compile_command " @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
 	    preload=yes
 	  fi
 	  case $arg in
 	  *.la | *.lo) ;;  # We handle these cases below.
 	  force)
 	    ;;
 	  esac
 	  ;;
 	expsyms)
 	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
+	  test -f "$arg" \
-	    $echo "$modename: symbol file \`$arg' does not exist"
+	    || func_fatal_error "symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
 	  prev=
 	  continue
 	  ;;
 	expsyms_regex)
 	  export_symbols_regex="$arg"
 	  prev=
 	  continue
 	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
 	inst_prefix)
 	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+		# Read the .lo file
+		func_source "$arg"
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
 	  prev=
 	  continue
 	  ;;
 	precious_regex)
 	  precious_files_regex="$arg"
 	release)
 	  release="-$arg"
 	  prev=
 	  continue
 	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
 	rpath | xrpath)
 	  # We need an absolute path.
 	  case $arg in
 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
 	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    func_fatal_error "only absolute run-paths are allowed"
-	    exit $EXIT_FAILURE
 	    ;;
 	  esac
 	  if test "$prev" = rpath; then
 	    case "$rpath " in
 	    *" $arg "*) ;;
 	    esac
 	  fi
 	  prev=
 	  continue
 	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  weak_libs="$weak_libs $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
 	xcompiler)
 	  compiler_flags="$compiler_flags $qarg"
 	  prev=
-	  compile_command="$compile_command $qarg"
+	  func_append compile_command " $qarg"
-	  finalize_command="$finalize_command $qarg"
+	  func_append finalize_command " $qarg"
 	  continue
 	  ;;
 	xlinker)
 	  linker_flags="$linker_flags $qarg"
 	  compiler_flags="$compiler_flags $wl$qarg"
 	  prev=
-	  compile_command="$compile_command $wl$qarg"
+	  func_append compile_command " $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
-	  continue
-	  ;;
-	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	shrext)
-	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  prev=
 	  continue
 	  ;;
 	*)
 	  eval "$prev=\"\$arg\""
 	  prev=
 prevarg="$arg"
 case $arg in
 -all-static)
 	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
+	  # See comment for -static flag below, for more details.
-	  finalize_command="$finalize_command $link_static_flag"
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
 	fi
 	continue
 	;;
 -allow-undefined)
 	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
-	continue
 	;;
 -avoid-version)
 	avoid_version=yes
 	continue
 	continue
 	;;
 -export-symbols | -export-symbols-regex)
 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
 	fi
 	if test "X$arg" = "X-export-symbols"; then
 	  prev=expsyms
 	else
 	  prev=expsyms_regex
 	fi
 	continue
 	;;
--framework|-arch|-isysroot)
+-framework)
-	case " $CC " in
+	prev=framework
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*)
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
 	continue
 	;;
 -inst-prefix-dir)
 	prev=inst_prefix
 # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
 # so, if we see these flags be careful not to treat them like -L
 -L[A-Z][A-Z]*:*)
 	case $with_gcc/$host in
 	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
+	  func_append compile_command " $arg"
-	  finalize_command="$finalize_command $arg"
+	  func_append finalize_command " $arg"
 	  ;;
 	esac
 	continue
 	;;
 -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	func_stripname '-L' '' "$arg"
+	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
 	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
+	  test -z "$absdir" && \
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
 	  dir="$absdir"
 	  ;;
 	esac
 	case "$deplibs " in
 	*" -L$dir "*) ;;
 	  deplibs="$deplibs -L$dir"
 	  lib_search_path="$lib_search_path $dir"
 	  ;;
 	esac
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
 	  *) dllsearchpath="$dllsearchpath:$dir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
 	esac
 	continue
 	;;
 -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
 	  *-*-os2*)
 	    # These systems don't actually have a C library (as such)
 	    # Do not include libc due to us having libc/libc_r.
 	    test "X$arg" = "X-lc" && continue
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    continue
 	    ;;
 	  *-*-sco3.2v5* | *-*-sco5v6*)
 	    # Causes problems with __ctype
 	    test "X$arg" = "X-lc" && continue
 	fi
 	deplibs="$deplibs $arg"
 	continue
 	;;
-# Tru64 UNIX uses -model [arg] to determine the layout of C++
-# classes, name mangling, and exception handling.
--model)
-	compile_command="$compile_command $arg"
-	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
-	prev=xcompiler
-	continue
-	;;
--mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
-	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
 -module)
 	module=yes
 	continue
 	;;
-# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+# Tru64 UNIX uses -model [arg] to determine the layout of C++
-# -r[0-9][0-9]* specifies the processor on the SGI compiler
+# classes, name mangling, and exception handling.
-# -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+# Darwin uses the -arch flag to determine output architecture.
-# +DA*, +DD* enable 64-bit mode on the HP compiler
+-model|-arch|-isysroot)
-# -q* pass through compiler args for the IBM compiler
+	compiler_flags="$compiler_flags $arg"
-# -m* pass through architecture-specific compiler args for GCC
+	func_append compile_command " $arg"
-# -m*, -t[45]*, -txscale* pass through architecture-specific
+	func_append finalize_command " $arg"
-# compiler args for GCC
+	prev=xcompiler
-# -pg pass through profiling flag for GCC
+	continue
-# @file GCC response files
+	;;
--64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
--t[45]*|-txscale*|@*)
+-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	compiler_flags="$compiler_flags $arg"
-	# Unknown arguments in both finalize_command and compile_command need
+	func_append compile_command " $arg"
-	# to be aesthetically quoted because they are evaled later.
+	func_append finalize_command " $arg"
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$new_inherited_linker_flags " in
-	case $arg in
+	    *" $arg "*) ;;
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
-	  arg="\"$arg\""
-	  ;;
 	esac
-compile_command="$compile_command $arg"
+	continue
-finalize_command="$finalize_command $arg"
+	;;
-compiler_flags="$compiler_flags $arg"
-continue
+-multi_module)
-;;
+	single_module="${wl}-multi_module"
--shrext)
-	prev=shrext
 	continue
 	;;
 -no-fast-install)
 	fast_install=no
 	continue
 	;;
 -no-install)
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
 	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
+	  # and Darwin in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  func_warning "\`-no-install' is ignored for $host"
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  func_warning "assuming \`-no-fast-install' instead"
 	  fast_install=no
 	  ;;
 	*) no_install=yes ;;
 	esac
 	continue
 	prev=xrpath
 	continue
 	;;
 -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
 	# We need an absolute path.
 	case $dir in
 	[\\/]* | [A-Za-z]:[\\/]*) ;;
 	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  func_fatal_error "only absolute run-paths are allowed"
-	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	case "$xrpath " in
 	*" $dir "*) ;;
 	*) xrpath="$xrpath $dir" ;;
 	esac
 	continue
 	;;
--static)
+-shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+-shrext)
+	prev=shrext
+	continue
+	;;
+-static | -static-libtool-libs)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
 	# would be equivalent was wrong.  It would break on at least
 	# Digital Unix and AIX.
 -version-info)
 	prev=vinfo
 	continue
 	;;
 -version-number)
 	prev=vinfo
 	vinfo_number=yes
 	continue
 	;;
+-weak)
+prev=weak
+	continue
+	;;
 -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
+func_quote_for_eval "$flag"
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="$arg $wl$func_quote_for_eval_result"
-	    flag="\"$flag\""
+	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
 	arg=
 	save_ifs="$IFS"; IFS=','
 	for flag in $args; do
 	  IFS="$save_ifs"
-	  case $flag in
+func_quote_for_eval "$flag"
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="$arg $wl$func_quote_for_eval_result"
-	    flag="\"$flag\""
+	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
-	    ;;
+	  linker_flags="$linker_flags $func_quote_for_eval_result"
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
 	done
 	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
 	;;
 -Xcompiler)
 	prev=xcompiler
 	continue
 -XCClinker)
 	prev=xcclinker
 	continue
 	;;
+# -msg_* for osf cc
+-msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+# -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+# -r[0-9][0-9]* specifies the processor on the SGI compiler
+# -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+# +DA*, +DD* enable 64-bit mode on the HP compiler
+# -q* pass through compiler args for the IBM compiler
+# -m*, -t[45]*, -txscale* pass through architecture-specific
+# compiler args for GCC
+# -F/path gives path to uninstalled frameworks, gcc on darwin
+# -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+# @file GCC response files
+-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+func_append compile_command " $arg"
+func_append finalize_command " $arg"
+compiler_flags="$compiler_flags $arg"
+continue
+;;
 # Some other compiler flag.
 -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
+func_quote_for_eval "$arg"
-	# to be aesthetically quoted because they are evaled later.
+	arg="$func_quote_for_eval_result"
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
 	;;
 *.$objext)
 	# A standard object.
 	objs="$objs $arg"
 *.lo)
 	# A libtool-controlled object.
 	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_unsafe_p "$arg"; then
 	  pic_object=
 	  non_pic_object=
 	  # Read the .lo file
-	  # If there is no directory component, then add one.
+	  func_source "$arg"
-	  case $arg in
-	  */* | *\\*) . $arg ;;
+	  if test -z "$pic_object" ||
-	  *) . ./$arg ;;
-	  esac
-	  if test -z "$pic_object" || \
 	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
+	     test "$pic_object" = none &&
 	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+	    func_fatal_error "cannot find name of object for \`$arg'"
-	    exit $EXIT_FAILURE
 	  fi
 	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  func_dirname "$arg" "/" ""
-	  if test "X$xdir" = "X$arg"; then
+	  xdir="$func_dirname_result"
-	    xdir=
-	  else
-	    xdir="$xdir/"
-	  fi
 	  if test "$pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
 	    pic_object="$xdir$pic_object"
 	      dlprefiles="$dlprefiles $pic_object"
 	      prev=
 	    fi
 	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
+	    func_append libobjs " $pic_object"
 	    arg="$pic_object"
 	  fi
 	  # Non-PIC object.
 	  if test "$non_pic_object" != none; then
 	    # Prepend the subdirectory the object is found in.
 	    non_pic_object="$xdir$non_pic_object"
 	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	    if test -z "$pic_object" || test "$pic_object" = none ; then
 	      arg="$non_pic_object"
 	    fi
 	  else
 	    # If the PIC object exists, use it instead.
 	    # $xdir was prepended to $pic_object above.
 	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	  fi
 	else
 	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
+	  if $opt_dry_run; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+	    # Extract subdirectory from the argument.
-	    exit $EXIT_FAILURE
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
 	  else
-	    # Dry-run case.
+	    func_fatal_error "\`$arg' is not a valid libtool object"
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
 	  fi
 	fi
 	;;
 *.$libext)
 # Some other compiler argument.
 *)
 	# Unknown arguments in both finalize_command and compile_command need
 	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	func_quote_for_eval "$arg"
-	case $arg in
+	arg="$func_quote_for_eval_result"
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
 	;;
 esac # arg
 # Now actually substitute the argument into the commands.
 if test -n "$arg"; then
-	compile_command="$compile_command $arg"
+	func_append compile_command " $arg"
-	finalize_command="$finalize_command $arg"
+	func_append finalize_command " $arg"
 fi
 done # argument parsing loop
-if test -n "$prev"; then
+test -n "$prev" && \
-$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+func_fatal_help "the \`$prevarg' option requires an argument"
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
 if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
 eval arg=\"$export_dynamic_flag_spec\"
-compile_command="$compile_command $arg"
+func_append compile_command " $arg"
-finalize_command="$finalize_command $arg"
+func_append finalize_command " $arg"
 fi
 oldlibs=
 # calculate the name of the file, without its directory
-outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+func_basename "$output"
+outputname="$func_basename_result"
 libobjs_save="$libobjs"
 if test -n "$shlibpath_var"; then
 # get the directories listed in $shlibpath_var
-eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
 else
 shlib_search_path=
 fi
 eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
 eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+func_dirname "$output" "/" ""
-if test "X$output_objdir" = "X$output"; then
+output_objdir="$func_dirname_result$objdir"
-output_objdir="$objdir"
-else
-output_objdir="$output_objdir/$objdir"
-fi
 # Create the object directory.
-if test ! -d "$output_objdir"; then
+func_mkdir_p "$output_objdir"
-$show "$mkdir $output_objdir"
-$run $mkdir $output_objdir
-exit_status=$?
-if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
-fi
-fi
 # Determine the type of output
 case $output in
 "")
-$echo "$modename: you must specify an output file" 1>&2
+func_fatal_help "you must specify an output file"
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
 ;;
 *.$libext) linkmode=oldlib ;;
 *.lo | *.$objext) linkmode=obj ;;
 *.la) linkmode=lib ;;
 *) linkmode=prog ;; # Anything else should be a program.
 esac
-case $host in
-*cygwin* | *mingw* | *pw32*)
-# don't eliminate duplications in $postdeps and $predeps
-duplicate_compiler_generated_deps=yes
-;;
-*)
-duplicate_compiler_generated_deps=$duplicate_deps
-;;
-esac
 specialdeplibs=
 libs=
 # Find all interdependent deplibs by searching for libraries
 # that are linked more than once (e.g. -la -lb -la)
 for deplib in $deplibs; do
-if test "X$duplicate_deps" = "Xyes" ; then
+if $opt_duplicate_deps ; then
 	case "$libs " in
 	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	esac
 fi
 libs="$libs $deplib"
 # Compute libraries that are listed more than once in $predeps
 # $postdeps and mark them as special (i.e., whose duplicates are
 # not to be eliminated).
 pre_post_deps=
-if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+if $opt_duplicate_compiler_generated_deps; then
 	for pre_post_dep in $predeps $postdeps; do
 	  case "$pre_post_deps " in
 	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
 	  esac
 	  pre_post_deps="$pre_post_deps $pre_post_dep"
 deplibs=
 newdependency_libs=
 newlib_search_path=
 need_relink=no # whether we're linking any uninstalled libtool libraries
 notinst_deplibs= # not-installed libtool libraries
+notinst_path= # paths that contain not-installed libtool libraries
 case $linkmode in
 lib)
-	passes="conv link"
+	passes="conv dlpreopen link"
 	for file in $dlfiles $dlprefiles; do
 	  case $file in
 	  *.la) ;;
 	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
-	    exit $EXIT_FAILURE
 	    ;;
 	  esac
 	done
 	;;
 prog)
 	passes="conv scan dlopen dlpreopen link"
 	;;
 *)  passes="conv"
 	;;
 esac
 for pass in $passes; do
+# The preopen pass in lib mode reverses $deplibs; put it back here
+# so that -L comes before libs that need it for instance...
+if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+fi
 if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
 	deplibs=
 fi
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
 	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
 	esac
 fi
+if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  case $lib in
+	  *.la)	func_source "$lib" ;;
+	  esac
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) deplibs="$deplibs $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+fi
 if test "$pass" = dlopen; then
 	# Collect dlpreopened libraries
 	save_deplibs="$deplibs"
 	deplibs=
 fi
 for deplib in $libs; do
 	lib=
 	found=no
 	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
 	  if test "$linkmode,$pass" = "prog,link"; then
 	    compile_deplibs="$deplib $compile_deplibs"
 	    finalize_deplibs="$deplib $finalize_deplibs"
 	  else
 	    compiler_flags="$compiler_flags $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
 	  fi
 	  continue
 	  ;;
 	-l*)
 	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    func_warning "\`-l' is ignored for archives/objects"
 	    continue
 	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  func_stripname '-l' '' "$deplib"
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
 	    for search_ext in .la $std_shrext .so .a; do
 	      # Search the libtool library
 	      lib="$searchdir/lib${name}${search_ext}"
 	      if test -f "$lib"; then
 		if test "$search_ext" = ".la"; then
 	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
 	    # We need to do some special things here, and not later.
 	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	      case " $predeps $postdeps " in
 	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
+		if func_lalib_p "$lib"; then
-grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
 		  library_names=
 		  old_library=
-		  case $lib in
+		  func_source "$lib"
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
 		  for l in $old_library $library_names; do
 		    ll="$l"
 		  done
 		  if test "X$ll" = "X$old_library" ; then # only static version available
 		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+		    func_dirname "$lib" "" "."
-		    test "X$ladir" = "X$lib" && ladir="."
+		    ladir="$func_dirname_result"
 		    lib=$ladir/$old_library
 		    if test "$linkmode,$pass" = "prog,link"; then
 		      compile_deplibs="$deplib $compile_deplibs"
 		      finalize_deplibs="$deplib $finalize_deplibs"
 		    else
 		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
 		    fi
 		    continue
 		  fi
 		fi
-	        ;;
+		;;
 	      *) ;;
 	      esac
 	    fi
 	  fi
 	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
 	-L*)
 	  case $linkmode in
 	  lib)
 	    deplibs="$deplib $deplibs"
 	    test "$pass" = conv && continue
 	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  prog)
 	    if test "$pass" = conv; then
 	      deplibs="$deplib $deplibs"
 	      continue
 	      deplibs="$deplib $deplibs"
 	    else
 	      compile_deplibs="$deplib $compile_deplibs"
 	      finalize_deplibs="$deplib $finalize_deplibs"
 	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
 	    ;;
 	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    func_warning "\`-L' is ignored for archives/objects"
 	    ;;
 	  esac # linkmode
 	  continue
 	  ;; # -L
 	-R*)
 	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    func_stripname '-R' '' "$deplib"
+	    dir=$func_stripname_result
 	    # Make sure the xrpath contains only unique directories.
 	    case "$xrpath " in
 	    *" $dir "*) ;;
 	    *) xrpath="$xrpath $dir" ;;
 	    esac
 	    deplibs="$deplib $deplibs"
 	    continue
 	  fi
 	  case $linkmode in
 	  lib)
-	    valid_a_lib=no
+	    # Linking convenience modules into shared libraries is allowed,
-	    case $deplibs_check_method in
+	    # but linking other static libraries is non-portable.
-	      match_pattern*)
+	    case " $dlpreconveniencelibs " in
-		set dummy $deplibs_check_method
+	    *" $deplib "*) ;;
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	    *)
-		if eval $echo \"$deplib\" 2>/dev/null \
+	      valid_a_lib=no
-		    | $SED 10q \
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
 		  valid_a_lib=yes
-		fi
 		;;
-	      pass_all)
+	      esac
-		valid_a_lib=yes
+	      if test "$valid_a_lib" != yes; then
-		;;
+		$ECHO
-esac
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-	    if test "$valid_a_lib" != yes; then
+		$ECHO "*** I have the capability to make that library automatically link in when"
-	      $echo
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+		$ECHO "*** shared version of the library, which you do not appear to have"
-	      $echo "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** that it is just a static archive that I should not use here."
-	      $echo "*** shared version of the library, which you do not appear to have"
+	      else
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO
-	      $echo "*** that it is just a static archive that I should not used here."
+		$ECHO "*** Warning: Linking the shared library $output against the"
-	    else
+		$ECHO "*** static library $deplib is not portable!"
-	      $echo
+		deplibs="$deplib $deplibs"
-	      $echo "*** Warning: Linking the shared library $output against the"
+	      fi
-	      $echo "*** static library $deplib is not portable!"
+	      ;;
-	      deplibs="$deplib $deplibs"
+	    esac
-	    fi
 	    continue
 	    ;;
 	  prog)
 	    if test "$pass" != link; then
 	      deplibs="$deplib $deplibs"
 	%DEPLIBS%)
 	  alldeplibs=yes
 	  continue
 	  ;;
 	esac # case $deplib
 	if test "$found" = yes || test -f "$lib"; then :
 	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
-	  exit $EXIT_FAILURE
 	fi
 	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	func_lalib_unsafe_p "$lib" \
-	else
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
+	func_dirname "$lib" "" "."
-	fi
+	ladir="$func_dirname_result"
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
 	dlname=
 	dlopen=
 	dlpreopen=
 	libdir=
 	library_names=
 	old_library=
+	inherited_linker_flags=
 	# If the library was installed with an old release of libtool,
 	# it will not redefine variables installed, or shouldnotlink
 	installed=yes
 	shouldnotlink=no
 	avoidtemprpath=
 	# Read the .la file
-	case $lib in
+	func_source "$lib"
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
+	# Convert "-framework foo" to "foo.ltframework"
-	esac
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
 	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
 	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
 	if test "$pass" = conv; then
 	  # Only check for convenience libraries
 	  deplibs="$lib $deplibs"
 	  if test -z "$libdir"; then
 	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      func_fatal_error "cannot find name of link library for \`$lib'"
-	      exit $EXIT_FAILURE
 	    fi
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    func_fatal_error "\`$lib' is not a convenience library"
-	    exit $EXIT_FAILURE
 	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_duplicate_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
 	  continue
 	fi # $pass = conv
 	# Get the name of the library we link against.
 	linklib=
 	for l in $old_library $library_names; do
 	  linklib="$l"
 	done
 	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  func_fatal_error "cannot find name of link library for \`$lib'"
-	  exit $EXIT_FAILURE
 	fi
 	# This library was specified with -dlopen.
 	if test "$pass" = dlopen; then
 	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
-	    exit $EXIT_FAILURE
 	  fi
 	  if test -z "$dlname" ||
 	     test "$dlopen_support" != yes ||
 	     test "$build_libtool_libs" = no; then
 	    # If there is no dlname, no dlopen support or we're linking
 	case $ladir in
 	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
 	*)
 	  abs_ladir=`cd "$ladir" && pwd`
 	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    func_warning "passing it literally to the linker, although it might fail"
 	    abs_ladir="$ladir"
 	  fi
 	  ;;
 	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	func_basename "$lib"
+	laname="$func_basename_result"
 	# Find the relevant object directory and library name.
 	if test "X$installed" = Xyes; then
 	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    func_warning "library \`$lib' was moved."
 	    dir="$ladir"
 	    absdir="$abs_ladir"
 	    libdir="$abs_ladir"
 	  else
 	    dir="$libdir"
 	    absdir="$abs_ladir/$objdir"
 	    # Remove this search path later
 	    notinst_path="$notinst_path $abs_ladir"
 	  fi
 	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
 	# This library was specified with -dlpreopen.
 	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
-	    exit $EXIT_FAILURE
 	  fi
 	  # Prefer using a static library (so that no silly _DYNAMIC symbols
 	  # are required to link).
 	  if test -n "$old_library"; then
 	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	    # Keep a list of preopened convenience libraries to check
+	    # that they are being used correctly in the link pass.
+	    test -z "$libdir" && \
+		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
 	  # Otherwise, use the dlname, so that lt_dlopen finds it.
 	  elif test -n "$dlname"; then
 	    newdlprefiles="$newdlprefiles $dir/$dlname"
 	  else
 	    newdlprefiles="$newdlprefiles $dir/$linklib"
 	  fi
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    -L*) func_stripname '-L' '' "$deplib"
+	         newlib_search_path="$newlib_search_path $func_stripname_result"
+		 ;;
 	    esac
 	    # Need to link against all dependency_libs?
 	    if test "$linkalldeplibs" = yes; then
 	      deplibs="$deplib $deplibs"
 	    else
 	      # Need to hardcode shared library paths
 	      # or/and link against static libraries
 	      newdependency_libs="$deplib $newdependency_libs"
 	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
 	    fi
 	    tmp_libs="$tmp_libs $deplib"
 	  continue
 	fi # $linkmode = prog...
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
+	      case "$temp_rpath:" in
-	      *" $dir "*) ;;
+	      *"$absdir:"*) ;;
-	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath$absdir:" ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
 	      esac
 	    fi
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	  fi
 	fi
 	link_static=no # Whether the deplib will be linked statically
 	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	if test "$use_static_libs" = built && test "$installed" = yes; then
 	  use_static_libs=no
 	fi
 	if test -n "$library_names" &&
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
+	  case $host in
-	    notinst_deplibs="$notinst_deplibs $lib"
+	  *cygwin* | *mingw* | *cegcc*)
-	    need_relink=yes
+	      # No point in relinking DLLs because paths are not encoded
-	  fi
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
 	  # This is a shared library
-	  # Warn about portability, can't link against -module's on
+	  # Warn about portability, can't link against -module's on some
-	  # some systems (darwin)
+	  # systems (darwin).  Don't bleat about dlopened modules though!
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	  dlopenmodule=""
-	    $echo
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    $ECHO
 	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
 	    fi
-	    $echo "*** $linklib is not portable!"
+	    $ECHO "*** $linklib is not portable!"
 	  fi
 	  if test "$linkmode" = lib &&
 	     test "$hardcode_into_libs" = yes; then
 	    # Hardcode the library path.
 	    # Skip directories that are in the system default run-time
 	  fi
 	  if test -n "$old_archive_from_expsyms_cmds"; then
 	    # figure out the soname
 	    set dummy $library_names
-	    realname="$2"
+	    shift
-	    shift; shift
+	    realname="$1"
-	    libname=`eval \\$echo \"$libname_spec\"`
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
 	    # use dlname if we got it. it's perfectly good, no?
 	    if test -n "$dlname"; then
 	      soname="$dlname"
 	    elif test -n "$soname_spec"; then
 	      # bleh windows
 	      case $host in
-	      *cygwin* | mingw*)
+	      *cygwin* | mingw* | *cegcc*)
-		major=`expr $current - $age`
+	        func_arith $current - $age
+		major=$func_arith_result
 		versuffix="-$major"
 		;;
 	      esac
 	      eval soname=\"$soname_spec\"
 	    else
 	      soname="$realname"
 	    fi
 	    # Make a new name for the extract_expsyms_cmds to use
 	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+	    func_basename "$soroot"
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
 	    # If the library has no export list, then create one now
 	    if test -f "$output_objdir/$soname-def"; then :
 	    else
-	      $show "extracting exported symbol list from \`$soname'"
+	      func_verbose "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
 	    fi
 	    # Create $newlib
 	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
+	      func_verbose "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
 	    fi
 	    # make sure the library variables are pointing to the new library
 	    dir=$output_objdir
 	    linklib=$newlib
 	  fi # test -n "$old_archive_from_expsyms_cmds"
 		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
 		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
 		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
 		    *-*-unixware7*) add_dir="-L$dir" ;;
 		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
+		    # if the lib is a (non-dlopened) module then we can not
-		    # it, someone is ignoring the new warnings I added
+		    # link against it, someone is ignoring the earlier warnings
 		    if /usr/bin/file -L $add 2> /dev/null |
-$EGREP ": [^:]* bundle" >/dev/null ; then
+			 $GREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
+		      if test "X$dlopenmodule" != "X$lib"; then
-		      if test -z "$old_library" ; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
-		        $echo
+			if test -z "$old_library" ; then
-		        $echo "** And there doesn't seem to be a static archive available"
+			  $ECHO
-		        $echo "** The link will probably fail, sorry"
+			  $ECHO "*** And there doesn't seem to be a static archive available"
-		      else
+			  $ECHO "*** The link will probably fail, sorry"
-		        add="$dir/$old_library"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
 		      fi
 		    fi
 		esac
 	      elif test "$hardcode_minus_L" = no; then
 		case $host in
 	      else
 		lib_linked=no
 	      fi
 	      ;;
 	    relink)
-	      if test "$hardcode_direct" = yes; then
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
 		add="$dir/$linklib"
 	      elif test "$hardcode_minus_L" = yes; then
 		add_dir="-L$dir"
 		# Try looking first in the location we're being installed to.
 		if test -n "$inst_prefix_dir"; then
 	      ;;
 	    *) lib_linked=no ;;
 	    esac
 	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      func_fatal_configuration "unsupported hardcode properties"
-	      exit $EXIT_FAILURE
 	    fi
 	    if test -n "$add_shlibpath"; then
 	      case :$compile_shlibpath: in
 	      *":$add_shlibpath:"*) ;;
 	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
 	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
 	    else
 	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
 	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
+	      if test "$hardcode_direct" != yes &&
-		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_minus_L" != yes &&
 		 test "$hardcode_shlibpath_var" = yes; then
 		case :$finalize_shlibpath: in
 		*":$libdir:"*) ;;
 		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
 		esac
 	  if test "$linkmode" = prog || test "$mode" = relink; then
 	    add_shlibpath=
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
 	      add="-l$name"
 	    elif test "$hardcode_shlibpath_var" = yes; then
 	      esac
 	      add="-l$name"
 	    elif test "$hardcode_automatic" = yes; then
 	      if test -n "$inst_prefix_dir" &&
 		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
+		add="$inst_prefix_dir$libdir/$linklib"
 	      else
-	        add="$libdir/$linklib"
+		add="$libdir/$linklib"
 	      fi
 	    else
 	      # We cannot seem to hardcode it, guess we'll fake it.
 	      add_dir="-L$libdir"
 	      # Try looking first in the location we're being installed to.
 	    # We're trying link a shared library against a static one
 	    # but the system doesn't support it.
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $echo
+	    $ECHO
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
+	    $ECHO "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$echo
+		$ECHO
-		$echo "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
 	       test "$link_static" = yes; }; then
 	    # Extract -R from dependency_libs
 	    temp_deplibs=
 	    for libdir in $dependency_libs; do
 	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
 		   case " $xrpath " in
 		   *" $temp_xrpath "*) ;;
 		   *) xrpath="$xrpath $temp_xrpath";;
 		   esac;;
 	      *) temp_deplibs="$temp_deplibs $libdir";;
 	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
 	  # ... and its dependency_libs
 	  tmp_libs=
 	  for deplib in $dependency_libs; do
 	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
+	    if $opt_duplicate_deps ; then
 	      case "$tmp_libs " in
 	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
 	      esac
 	    fi
 	    tmp_libs="$tmp_libs $deplib"
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+	        func_dirname "$deplib" "" "."
-		test "X$dir" = "X$deplib" && dir="."
+		dir="$func_dirname_result"
 		# We need an absolute path.
 		case $dir in
 		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
 		*)
 		  absdir=`cd "$dir" && pwd`
 		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    func_warning "cannot determine absolute directory name of \`$dir'"
 		    absdir="$dir"
 		  fi
 		  ;;
 		esac
-		if grep "^installed=no" $deplib > /dev/null; then
+		if $GREP "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
 		case $host in
 		*-*-darwin*)
-		  # we do not want to link against static libs,
+		  depdepl=
-		  # but need to link against shared
 		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
 		  if test -n "$deplibrary_names" ; then
 		    for tmp in $deplibrary_names ; do
 		      depdepl=$tmp
 		    done
-		    if test -f "$path/$depdepl" ; then
+		    if test -f "$absdir/$objdir/$depdepl" ; then
-		      depdepl="$path/$depdepl"
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+if test -z "$darwin_install_name"; then
+darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+fi
+		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
 		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
 		  fi
-		  path=""
 		  ;;
 		*)
-		  path="-L$path"
+		  path="-L$absdir/$objdir"
 		  ;;
 		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+		  path="-L$absdir"
+		fi
 		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
 	      esac
 	      case " $deplibs " in
 	      *" $path "*) ;;
 	      *) deplibs="$path $deplibs" ;;
 	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
 	    done
 	  fi # link_all_deplibs != no
 	fi # linkmode = lib
 done # for deplib in $libs
+if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+fi
 dependency_libs="$newdependency_libs"
 if test "$pass" = dlpreopen; then
 	# Link the dlpreopened libraries before other libraries
 	for deplib in $save_deplibs; do
 	  deplibs="$deplib $deplibs"
 done
 dependency_libs=$tmp_libs
 done # for pass
 if test "$linkmode" = prog; then
 dlfiles="$newdlfiles"
+fi
+if test "$linkmode" = prog || test "$linkmode" = lib; then
 dlprefiles="$newdlprefiles"
 fi
 case $linkmode in
 oldlib)
-if test -n "$deplibs"; then
+if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+	func_warning "\`-dlopen' is ignored for archives"
 fi
-if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+case " $deplibs" in
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+*\ -l* | *\ -L*)
-fi
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+esac
-if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+test -n "$rpath" && \
-fi
+	func_warning "\`-rpath' is ignored for archives"
-if test -n "$xrpath"; then
+test -n "$xrpath" && \
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+	func_warning "\`-R' is ignored for archives"
-fi
+test -n "$vinfo" && \
-if test -n "$vinfo"; then
+	func_warning "\`-version-info/-version-number' is ignored for archives"
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-fi
+test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
-if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+test -n "$export_symbols$export_symbols_regex" && \
-fi
+	func_warning "\`-export-symbols' is ignored for archives"
-if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-fi
 # Now set the variables for building old libraries.
 build_libtool_libs=no
 oldlibs="$output"
 objs="$objs$old_deplibs"
 lib)
 # Make sure we only generate libraries of the form `libNAME.la'.
 case $outputname in
 lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
 	eval shared_ext=\"$shrext_cmds\"
 	eval libname=\"$libname_spec\"
 	;;
 *)
-	if test "$module" = no; then
+	test "$module" = no && \
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
 	if test "$need_lib_prefix" != no; then
 	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
 	  eval shared_ext=\"$shrext_cmds\"
 	  eval libname=\"$libname_spec\"
 	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
 	fi
 	;;
 esac
 if test -n "$objs"; then
 	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
-	  exit $EXIT_FAILURE
 	else
-	  $echo
+	  $ECHO
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
+	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
 	fi
 fi
-if test "$dlself" != no; then
+test "$dlself" != no && \
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
-fi
 set dummy $rpath
-if test "$#" -gt 2; then
+shift
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+test "$#" -gt 1 && \
-fi
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
-install_libdir="$2"
+install_libdir="$1"
 oldlibs=
 if test -z "$rpath"; then
 	if test "$build_libtool_libs" = yes; then
 	  # Building a libtool convenience library.
 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
 	  build_libtool_libs=convenience
 	  build_old_libs=yes
 	fi
-	if test -n "$vinfo"; then
+	test -n "$vinfo" && \
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-	fi
+	test -n "$release" && \
-	if test -n "$release"; then
+	  func_warning "\`-release' is ignored for convenience libraries"
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
 else
 	# Parse the version information argument.
 	save_ifs="$IFS"; IFS=':'
 	set dummy $vinfo 0 0 0
+	shift
 	IFS="$save_ifs"
-	if test -n "$8"; then
+	test -n "$7" && \
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  func_fatal_help "too many parameters to \`-version-info'"
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
 	# convert absolute version numbers to libtool ages
 	# this retains compatibility with .la files and attempts
 	# to make the code below a bit more comprehensible
 	case $vinfo_number in
 	yes)
-	  number_major="$2"
+	  number_major="$1"
-	  number_minor="$3"
+	  number_minor="$2"
-	  number_revision="$4"
+	  number_revision="$3"
 	  #
 	  # There are really only two kinds -- those that
 	  # use the current revision as the major version
 	  # and those that subtract age and use age as
 	  # a minor version.  But, then there is irix
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows)
+	  darwin|linux|osf|windows|none)
-	    current=`expr $number_major + $number_minor`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
 	  freebsd-aout|freebsd-elf|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
 	    ;;
 	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
 	    age="$number_minor"
 	    revision="$number_minor"
+	    lt_irix_increment=no
 	    ;;
 	  esac
 	  ;;
 	no)
-	  current="$2"
+	  current="$1"
-	  revision="$3"
+	  revision="$2"
-	  age="$4"
+	  age="$3"
 	  ;;
 	esac
 	# Check that each of the things are valid numbers.
 	case $current in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  func_fatal_error "\`$vinfo' is not valid version information"
-	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	case $revision in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  func_fatal_error "\`$vinfo' is not valid version information"
-	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	case $age in
 	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+	  func_error "AGE \`$age' must be a nonnegative integer"
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  func_fatal_error "\`$vinfo' is not valid version information"
-	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  func_fatal_error "\`$vinfo' is not valid version information"
-	  exit $EXIT_FAILURE
 	fi
 	# Calculate the version variables.
 	major=
 	versuffix=
 	none) ;;
 	darwin)
 	  # Like Linux, but with the current version available in
 	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
+	  func_arith $current + 1
-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
 	  ;;
 	freebsd-aout)
 	  major=".$current"
 	  versuffix=".$current.$revision";
 	  ;;
 	freebsd-elf)
 	  major=".$current"
-	  versuffix=".$current";
+	  versuffix=".$current"
 	  ;;
 	irix | nonstopux)
-	  major=`expr $current - $age + 1`
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
 	  case $version_type in
 	    nonstopux) verstring_prefix=nonstopux ;;
 	    *)         verstring_prefix=sgi ;;
 	  esac
 	  verstring="$verstring_prefix$major.$revision"
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$revision
 	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
+	    func_arith $revision - $loop
-	    loop=`expr $loop - 1`
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring_prefix$major.$iface:$verstring"
 	  done
 	  # Before this point, $major must not contain `.'.
 	  major=.$major
 	  versuffix="$major.$revision"
 	  ;;
 	linux)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix="$major.$age.$revision"
 	  ;;
 	osf)
-	  major=.`expr $current - $age`
+	  func_arith $current - $age
+	  major=.$func_arith_result
 	  versuffix=".$current.$age.$revision"
 	  verstring="$current.$age.$revision"
 	  # Add in all the interfaces that we are compatible with.
 	  loop=$age
 	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
+	    func_arith $current - $loop
-	    loop=`expr $loop - 1`
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
 	    verstring="$verstring:${iface}.0"
 	  done
 	  # Make executables depend on our current version.
 	  verstring="$verstring:${current}.0"
+	  ;;
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
 	  ;;
 	sunos)
 	  major=".$current"
 	  versuffix=".$current.$revision"
 	  ;;
 	windows)
 	  # Use '-' rather than '.', since we only want one
 	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
+	  func_arith $current - $age
+	  major=$func_arith_result
 	  versuffix="-$major"
 	  ;;
 	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  func_fatal_configuration "unknown library version type \`$version_type'"
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
 	  ;;
 	esac
 	# Clear the version info if we defaulted, and they specified a release.
 	if test -z "$vinfo" && test -n "$release"; then
 	fi
 	# Check to see if the archive will have undefined symbols.
 	if test "$allow_undefined" = yes; then
 	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    func_warning "undefined symbols not allowed in $host shared libraries"
 	    build_libtool_libs=no
 	    build_old_libs=yes
 	  fi
 	else
 	  # Don't allow undefined symbols.
 	  allow_undefined_flag="$no_undefined_flag"
 	fi
 fi
+func_generate_dlsyms "$libname" "$libname" "yes"
+libobjs="$libobjs $symfileobj"
+test "X$libobjs" = "X " && libobjs=
 if test "$mode" != relink; then
 	# Remove our outputs, but don't remove object files since they
 	# may have been created when compiling PIC objects.
 	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
+	tempremovelist=`$ECHO "$output_objdir/*"`
 	for p in $tempremovelist; do
 	  case $p in
-	    *.$objext)
+	    *.$objext | *.gcno)
 	       ;;
 	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
 	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
+		 then
 		   continue
 		 fi
 	       fi
 	       removelist="$removelist $p"
 	       ;;
 	    *) ;;
 	  esac
 	done
-	if test -n "$removelist"; then
+	test -n "$removelist" && \
-	  $show "${rm}r $removelist"
+	  func_show_eval "${RM}r \$removelist"
-	  $run ${rm}r $removelist
-	fi
 fi
 # Now set the variables for building old libraries.
 if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
 fi
 # Eliminate all temporary directories.
-for path in $notinst_path; do
+#for path in $notinst_path; do
-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+#	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+#	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+#	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
-done
+#done
 if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
 	temp_xrpath=
 	for libdir in $xrpath; do
 done
 if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
 	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
+	    deplibs="$deplibs System.ltframework"
 	    ;;
 	  *-*-netbsd*)
 	    # Don't link with libc until the a.out ld.so is fixed.
 	    ;;
 	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
 	    # Causes problems with __ctype
 	    ;;
 	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
 	    # Compiler inserts libc in the correct place for threads to work
 	    ;;
 	  *)
 	    # Add libc to deplibs on all other systems if necessary.
 	    if test "$build_libtool_need_lc" = "yes"; then
 	      deplibs="$deplibs -lc"
 	    fi
 	    ;;
 	test_compile)
 	  # This code stresses the "libraries are programs" paradigm to its
 	  # limits. Maybe even breaks it.  We compile a program, linking it
 	  # against the deplibs as a proxy for the library.  Then we can check
 	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
+	  $opt_dry_run || $RM conftest.c
 	  cat > conftest.c <<EOF
 	  int main() { return 0; }
 EOF
-	  $rm conftest
+	  $opt_dry_run || $RM conftest
-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-	  if test "$?" -eq 0 ; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
+	      case $i in
-	      # If $name is empty we are operating on a -L argument.
+	      -l*)
-if test "$name" != "" && test "$name" -ne "0"; then
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
 		    newdeplibs="$newdeplibs $i"
 		    i=""
 		    ;;
 		  esac
-	        fi
+		fi
 		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		  set dummy $deplib_matches
+		  set dummy $deplib_matches; shift
-		  deplib_match=$2
+		  deplib_match=$1
 		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    $echo
+		    $ECHO
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  else
 	    # Error occurred in the first compile.  Let's try to salvage
 	    # the situation: Compile a separate program for each library.
 	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
+	      case $i in
-	      # If $name is empty we are operating on a -L argument.
+	      -l*)
-if test "$name" != "" && test "$name" != "0"; then
+		func_stripname -l '' "$i"
-		$rm conftest
+		name=$func_stripname_result
-		$LTCC $LTCFLAGS -o conftest conftest.c $i
+		$opt_dry_run || $RM conftest
-		# Did it work?
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-		if test "$?" -eq 0 ; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
 		    *" $i "*)
 		      newdeplibs="$newdeplibs $i"
 		      i=""
 		      ;;
 		    esac
 		  fi
 		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
-		    set dummy $deplib_matches
+		    set dummy $deplib_matches; shift
-		    deplib_match=$2
+		    deplib_match=$1
 		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      $echo
+		      $ECHO
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $echo
+		  $ECHO
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "***  make it link in!  You will probably need to install it or some"
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
+		  $ECHO "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
-	      else
+		;;
+	      *)
 		newdeplibs="$newdeplibs $i"
-	      fi
+		;;
+	      esac
 	    done
 	  fi
 	  ;;
 	file_magic*)
-	  set dummy $deplibs_check_method
+	  set dummy $deplibs_check_method; shift
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
+	    case $a_deplib in
-	    # If $name is empty we are operating on a -L argument.
+	    -l*)
-if test "$name" != "" && test  "$name" != "0"; then
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  newdeplibs="$newdeplibs $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
+		      if ls -lLd "$potent_lib" 2>/dev/null |
-			 | grep " -> " >/dev/null; then
+			 $GREP " -> " >/dev/null; then
 			continue
 		      fi
 		      # The statement above tries to avoid entering an
 		      # endless loop below, in case of cyclic links.
 		      # We might still enter an endless loop, since a link
 		      potlib="$potent_lib"
 		      while test -h "$potlib" 2>/dev/null; do
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
-			 | ${SED} 10q \
+			 $SED -e 10q |
-			 | $EGREP "$file_magic_regex" > /dev/null; then
+			 $EGREP "$file_magic_regex" > /dev/null; then
 			newdeplibs="$newdeplibs $a_deplib"
 			a_deplib=""
 			break 2
 		      fi
 		  done
 		done
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
+		$ECHO
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	match_pattern*)
-	  set dummy $deplibs_check_method
+	  set dummy $deplibs_check_method; shift
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
 	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
+	    case $a_deplib in
-	    # If $name is empty we are operating on a -L argument.
+	    -l*)
-	    if test -n "$name" && test "$name" != "0"; then
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
 	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		case " $predeps $postdeps " in
 		*" $a_deplib "*)
 		  newdeplibs="$newdeplibs $a_deplib"
 		  a_deplib=""
 		  ;;
 		esac
 	      fi
 	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
+		libname=`eval "\\$ECHO \"$libname_spec\""`
 		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
-		        | ${SED} 10q \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
 		      break 2
 		    fi
 		  done
 		done
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$echo
+		$ECHO
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
 		fi
 	      fi
-	    else
+	      ;;
+	    *)
 	      # Add a -L argument.
 	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
+	      ;;
+	    esac
 	  done # Gone through all deplibs.
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-	    -e 's/ -[LR][^ ]*//g'`
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 	    done
 	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
-	    | grep . >/dev/null; then
+	     $GREP . >/dev/null; then
-	    $echo
+	    $ECHO
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
 	  fi
 	  ;;
 	esac
 	versuffix=$versuffix_save
 	libname=$libname_save
 	name=$name_save
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
+	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $echo
+	    $ECHO
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
+	    $ECHO "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $echo
+	      $ECHO
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
 	      build_libtool_libs=module
 	      build_old_libs=yes
 	    else
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
+	    $ECHO "*** or is declared to -dlopen it."
 	    if test "$allow_undefined" = no; then
-	      $echo
+	      $ECHO
-	      $echo "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
+	      $ECHO "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
+	      $ECHO "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
 		build_old_libs=yes
 	      else
 	  fi
 	fi
 	# Done checking deplibs!
 	deplibs=$newdeplibs
 fi
+# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+esac
 # move library search paths that coincide with paths to not yet
 # installed libraries to the beginning of the library search list
 new_libs=
 for path in $notinst_path; do
 	  ;;
 	*) new_libs="$new_libs $deplib" ;;
 	esac
 done
 deplibs="$new_libs"
 # All the library-specific variables (install_libdir is set above).
 library_names=
 old_library=
 dlname=
 	# Get the real and link names of the library.
 	eval shared_ext=\"$shrext_cmds\"
 	eval library_names=\"$library_names_spec\"
 	set dummy $library_names
-	realname="$2"
+	shift
-	shift; shift
+	realname="$1"
+	shift
 	if test -n "$soname_spec"; then
 	  eval soname=\"$soname_spec\"
 	else
 	  soname="$realname"
 	do
 	  linknames="$linknames $link"
 	done
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  delfiles="$delfiles $export_symbols"
+	fi
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
 	# Prepare the list of exported symbols
 	if test -z "$export_symbols"; then
 	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
+	    func_verbose "generating symbol list for \`$libname.la'"
 	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
+	    $opt_dry_run || $RM $export_symbols
 	    cmds=$export_symbols_cmds
 	    save_ifs="$IFS"; IFS='~'
 	    for cmd in $cmds; do
 	      IFS="$save_ifs"
 	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
+	      func_len " $cmd"
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	      len=$func_len_result
-	        $show "$cmd"
+	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $run eval "$cmd" || exit $?
+		func_show_eval "$cmd" 'exit $?'
-	        skipped_export=false
+		skipped_export=false
 	      else
-	        # The command line is too long to execute in one step.
+		# The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
+		func_verbose "using reloadable object file for export list..."
-	        skipped_export=:
+		skipped_export=:
 		# Break out early, otherwise skipped_export may be
 		# set to false by a later but shorter cmd.
 		break
 	      fi
 	    done
 	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
 	    fi
 	  fi
 	fi
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	fi
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
 	fi
 	tmp_deplibs=
 	for test_deplib in $deplibs; do
-		case " $convenience " in
+	  case " $convenience " in
-		*" $test_deplib "*) ;;
+	  *" $test_deplib "*) ;;
-		*)
+	  *)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
+	    tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
+	    ;;
-		esac
+	  esac
 	done
 	deplibs="$tmp_deplibs"
 	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
 	  if test -n "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  else
 	    gentop="$output_objdir/${outputname}x"
 	    generated="$generated $gentop"
 	    func_extract_archives $gentop $convenience
 	    libobjs="$libobjs $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	fi
 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
 	  eval flag=\"$thread_safe_flag_spec\"
 	  linker_flags="$linker_flags $flag"
 	fi
 	# Make a backup of the uninstalled library when relinking
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
 	fi
 	# Do each of the archive commands.
 	if test "$module" = yes && test -n "$module_cmds" ; then
 	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
 	  else
 	    eval test_cmds=\"$module_cmds\"
 	    cmds=$module_cmds
 	  fi
 	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
+	    eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
+	    cmds=$archive_expsym_cmds
-	else
+	  else
-	  eval test_cmds=\"$archive_cmds\"
+	    eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
+	    cmds=$archive_cmds
 	  fi
 	fi
 	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	   func_len " $test_cmds" &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  :
 	else
-	  # The command line is too long to link in one step, link piecewise.
+	  # The command line is too long to link in one step, link piecewise
-	  $echo "creating reloadable object files..."
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
 	  # Save the value of $output and $libobjs because we want to
 	  # use them later.  If we have whole_archive_flag_spec, we
 	  # want to use save_libobjs as it was before
 	  # whole_archive_flag_spec was expanded, because we can't
 	  # the spec.
 	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
 	  test_cmds=
 	  concat_cmds=
 	  objlist=
-	  delfiles=
 	  last_robj=
 	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
-	  for obj in $save_libobjs
+	    output=${output_objdir}/${output_la}.lnkscript
-	  do
+	    func_verbose "creating GNU ld script: $output"
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+	    $ECHO 'INPUT (' > $output
-	    if test "X$objlist" = X ||
+	    for obj in $save_libobjs
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	    do
-		 test "$len" -le "$max_cmd_len"; }; then
+	      $ECHO "$obj" >> $output
-	      objlist="$objlist $obj"
+	    done
+	    $ECHO ')' >> $output
+	    delfiles="$delfiles $output"
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    delfiles="$delfiles $output"
+	    output=$firstobj\"$file_list_spec$output\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=$obj
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      delfiles="$delfiles $output"
 	    else
-	      # The command $test_cmds is almost too long, add a
+	      output=
-	      # command to the queue.
+	    fi
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
+	    if ${skipped_export-false}; then
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+	      func_verbose "generating symbol list for \`$libname.la'"
-	      else
+	      export_symbols="$output_objdir/$libname.exp"
-		# All subsequent reloadable object files will link in
+	      $opt_dry_run || $RM $export_symbols
-		# the last one created.
+	      libobjs=$output
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
 	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
 	    fi
-	  done
-	  # Handle the remaining objects by creating one last
+	    test -n "$save_libobjs" &&
-	  # reloadable object file.  All subsequent reloadable object
+	      func_verbose "creating a temporary reloadable object file: $output"
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	    # Loop through the commands generated above and execute them.
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
-	  if ${skipped_export-false}; then
+	      IFS="$save_ifs"
-	    $show "generating symbol list for \`$libname.la'"
+	      $opt_silent || {
-	    export_symbols="$output_objdir/$libname.exp"
+		  func_quote_for_expand "$cmd"
-	    $run $rm $export_symbols
+		  eval "func_echo $func_quote_for_expand_result"
-	    libobjs=$output
+	      }
-	    # Append the command to create the export file.
+	      $opt_dry_run || eval "$cmd" || {
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+		lt_exit=$?
-fi
+		# Restore the uninstalled library and exit
-	  # Set up a command to remove the reloadable object files
+		if test "$mode" = relink; then
-	  # after they are used.
+		  ( cd "$output_objdir" && \
-	  i=0
+		    $RM "${realname}T" && \
-	  while test "$i" -lt "$k"
+		    $MV "${realname}U" "$realname" )
-	  do
+		fi
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+		exit $lt_exit
-	  done
+	      }
+	    done
-	  $echo "creating a temporary reloadable object file: $output"
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
 	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
-	  done
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	  IFS="$save_ifs"
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
 	  libobjs=$output
 	  # Restore the value of output.
 	  output=$save_output
 	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
 	  fi
 	  # Expand the library linking commands again to reset the
 	  # value of $libobjs for piecewise linking.
 	  # Do each of the archive commands.
 	      cmds=$module_expsym_cmds
 	    else
 	      cmds=$module_cmds
 	    fi
 	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
+	      cmds=$archive_expsym_cmds
-	  else
+	    else
-	    cmds=$archive_cmds
+	      cmds=$archive_cmds
 	    fi
 	  fi
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
 	fi
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+	  func_extract_archives $gentop $dlprefiles
+	  libobjs="$libobjs $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
 	save_ifs="$IFS"; IFS='~'
 	for cmd in $cmds; do
 	  IFS="$save_ifs"
 	  eval cmd=\"$cmd\"
-	  $show "$cmd"
+	  $opt_silent || {
-	  $run eval "$cmd" || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
 	    lt_exit=$?
 	    # Restore the uninstalled library and exit
 	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
 	    fi
 	    exit $lt_exit
 	  }
 	done
 	IFS="$save_ifs"
 	# Restore the uninstalled library and exit
 	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 	  if test -n "$convenience"; then
 	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
+	      func_show_eval '${RM}r "$gentop"'
-	      $run ${rm}r "$gentop"
 	    fi
 	  fi
 	  exit $EXIT_SUCCESS
 	fi
 	# Create links to the real library.
 	for linkname in $linknames; do
 	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
 	  fi
 	done
 	# If -module or -export-dynamic was specified, set the dlname.
 	if test "$module" = yes || test "$export_dynamic" = yes; then
 	fi
 fi
 ;;
 obj)
-if test -n "$deplibs"; then
+if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+	func_warning "\`-dlopen' is ignored for objects"
 fi
-if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+case " $deplibs" in
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+*\ -l* | *\ -L*)
-fi
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+esac
-if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+test -n "$rpath" && \
-fi
+	func_warning "\`-rpath' is ignored for objects"
-if test -n "$xrpath"; then
+test -n "$xrpath" && \
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+	func_warning "\`-R' is ignored for objects"
-fi
+test -n "$vinfo" && \
-if test -n "$vinfo"; then
+	func_warning "\`-version-info' is ignored for objects"
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-fi
+test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
-if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-fi
 case $output in
 *.lo)
-	if test -n "$objs$old_deplibs"; then
+	test -n "$objs$old_deplibs" && \
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-	  exit $EXIT_FAILURE
-	fi
+	libobj=$output
-	libobj="$output"
+	func_lo2o "$libobj"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	obj=$func_lo2o_result
 	;;
 *)
 	libobj=
 	obj="$output"
 	;;
 esac
 # Delete the old objects.
-$run $rm $obj $libobj
+$opt_dry_run || $RM $obj $libobj
 # Objects from convenience libraries.  This assumes
 # single-version convenience libraries.  Whenever we create
 # different ones for PIC/non-PIC, this we'll have to duplicate
 # the extraction.
 reload_conv_objs=
 gentop=
 # reload_cmds runs $LD directly, so let us get rid of
-# -Wl from whole_archive_flag_spec
+# -Wl from whole_archive_flag_spec and hope we can get by with
+# turning comma into space..
 wl=
 if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
 	  func_extract_archives $gentop $convenience
 	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
 fi
 # Create the old-style object.
-reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 output="$obj"
-cmds=$reload_cmds
+func_execute_cmds "$reload_cmds" 'exit $?'
-save_ifs="$IFS"; IFS='~'
-for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-done
-IFS="$save_ifs"
 # Exit if we aren't doing a library object file.
 if test -z "$libobj"; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
+	  func_show_eval '${RM}r "$gentop"'
-	  $run ${rm}r $gentop
 	fi
 	exit $EXIT_SUCCESS
 fi
 if test "$build_libtool_libs" != yes; then
 	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
+	  func_show_eval '${RM}r "$gentop"'
-	  $run ${rm}r $gentop
 	fi
 	# Create an invalid libtool object if no PIC, so that we don't
 	# accidentally link it into a program.
 	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
 	exit $EXIT_SUCCESS
 fi
 if test -n "$pic_flag" || test "$pic_mode" != default; then
 	# Only do commands if we really have different PIC objects.
 	reload_objs="$libobjs $reload_conv_objs"
 	output="$libobj"
-	cmds=$reload_cmds
+	func_execute_cmds "$reload_cmds" 'exit $?'
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
 fi
 if test -n "$gentop"; then
-	$show "${rm}r $gentop"
+	func_show_eval '${RM}r "$gentop"'
-	$run ${rm}r $gentop
 fi
 exit $EXIT_SUCCESS
 ;;
 prog)
 case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
 esac
-if test -n "$vinfo"; then
+test -n "$vinfo" && \
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+	func_warning "\`-version-info' is ignored for programs"
-fi
+test -n "$release" && \
-if test -n "$release"; then
+	func_warning "\`-release' is ignored for programs"
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-fi
+test "$preload" = yes \
+&& test "$dlopen_support" = unknown \
-if test "$preload" = yes; then
+	&& test "$dlopen_self" = unknown \
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	&& test "$dlopen_self_static" = unknown && \
-	   test "$dlopen_self_static" = unknown; then
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-fi
 case $host in
 *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
 esac
 case $host in
-*darwin*)
+*-*-darwin*)
-# Don't allow lazy linking, it breaks C++ global constructors
+	# Don't allow lazy linking, it breaks C++ global constructors
-if test "$tagname" = CXX ; then
+	# But is supposedly fixed on 10.4 or later (yay!).
-compile_command="$compile_command ${wl}-bind_at_load"
+	if test "$tagname" = CXX ; then
-finalize_command="$finalize_command ${wl}-bind_at_load"
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
-fi
+	    10.[0123])
-;;
+	      compile_command="$compile_command ${wl}-bind_at_load"
+	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
 esac
 # move library search paths that coincide with paths to not yet
 # installed libraries to the beginning of the library search list
 	  *" $libdir "*) ;;
 	  *) perm_rpath="$perm_rpath $libdir" ;;
 	  esac
 	fi
 	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
 	  *) dllsearchpath="$dllsearchpath:$libdir";;
 	  esac
 	  case :$dllsearchpath: in
 	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
 	  *) dllsearchpath="$dllsearchpath:$testbindir";;
 	  esac
 	  ;;
 	esac
 done
 fi
 finalize_rpath="$rpath"
 if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 fi
-dlsyms=
+func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+# template prelinking step
-	  dlsyms="${outputname}S.c"
+if test -n "$prelink_cmds"; then
-	else
+	func_execute_cmds "$prelink_cmds" 'exit $?'
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+fi
+wrappers_required=yes
+case $host in
+*cygwin* | *mingw* )
+if test "$build_libtool_libs" != yes; then
+wrappers_required=no
+fi
+;;
+*cegcc)
+# Disable wrappers for cegcc, we are cross compiling anyway.
+wrappers_required=no
+;;
+*)
+if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+wrappers_required=no
+fi
+;;
+esac
+if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 	fi
-fi
-if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-/* External symbol declarations for the compiler. */\
-"
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-case $host in
-*cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-;;
-esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-case $host in
-*cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-;;
-esac
-	    fi
-	  fi
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-	    $echo >> "$output_objdir/$dlsyms" "\
-#undef lt_preloaded_symbols
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-/* The mapping between symbol names and symbols. */
-"
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-runtime relocations are performed -- see ld's documentation
-on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-	  $echo >> "$output_objdir/$dlsyms" "\
-const char *name;
-lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-	    $echo >> "$output_objdir/$dlsyms" "\
-{0, (lt_ptr) 0}
-};
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-return lt_preloaded_symbols;
-}
-#endif
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-	  # Transform the symbol file into the correct name.
-case $host in
-*cygwin* | *mingw* )
-if test -f "$output_objdir/${outputname}.def" ; then
-compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
-else
-compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-fi
-;;
-* )
-compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
-;;
-esac
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-fi
-if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	link_command="$compile_command$compile_rpath"
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
 	exit $exit_status
-fi
-if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
 fi
 if test -n "$compile_shlibpath$finalize_shlibpath"; then
 	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
 fi
 if test "$no_install" = yes; then
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
-	$run $rm $output
+	$opt_dry_run || $RM $output
 	# Link the executable and exit
-	$show "$link_command"
+	func_show_eval "$link_command" 'exit $?'
-	$run eval "$link_command" || exit $?
 	exit $EXIT_SUCCESS
 fi
 if test "$hardcode_action" = relink; then
 	# Fast installation is not supported
 	link_command="$compile_var$compile_command$compile_rpath"
 	relink_command="$finalize_var$finalize_command$finalize_rpath"
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	func_warning "this platform does not like uninstalled shared libraries"
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+	func_warning "\`$output' will be relinked during installation"
 else
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
 	  fi
 	else
 	  relink_command="$finalize_var$finalize_command$finalize_rpath"
 	fi
 fi
 # Replace the output file specification.
-link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 # Delete the old output files.
-$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-$show "$link_command"
+func_show_eval "$link_command" 'exit $?'
-$run eval "$link_command" || exit $?
 # Now create the wrapper script.
-$show "creating $output"
+func_verbose "creating $output"
 # Quote the relink command for shipping.
 if test -n "$relink_command"; then
 	# Preserve any variables that may affect compiler behavior
 	for var in $variables_saved_for_relink; do
 	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	  elif eval var_value=\$$var; test -z "$var_value"; then
 	    relink_command="$var=; export $var; $relink_command"
 	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    func_quote_for_eval "$var_value"
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
 fi
-# Quote $echo for shipping.
+# Quote $ECHO for shipping.
-if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
 	case $progpath in
 	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
 	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
 	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
 else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
 fi
-# Only actually do things if our run command is non-null.
+# Only actually do things if not in dry run mode.
-if test -z "$run"; then
+$opt_dry_run || {
 	# win32 will think the script is a binary if it has
 	# a .exe suffix, so we strip it off here.
 	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
 	esac
 	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
 	  *cygwin*)
 	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
 	  *) exeext= ;;
 	esac
 	case $host in
 	  *cygwin* | *mingw* )
-output_name=`basename $output`
+	    func_dirname_and_basename "$output" "" "."
-output_path=`dirname $output`
+	    output_name=$func_basename_result
-cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    output_path=$func_dirname_result
-cwrapper="$output_path/$output_name.exe"
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
-$rm $cwrappersource $cwrapper
+	    cwrapper="$output_path/$output_name.exe"
-trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-	    cat > $cwrappersource <<EOF
+	    func_emit_cwrapperexe_src > $cwrappersource
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
-The $output program cannot be directly executed until all the libtool
+	    # compiling, it, like the target executable, must be
-libraries that it depends on are installed.
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
-This wrapper executable should never be moved out of the build directory.
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
-If it is, it will not operate correctly.
+	      $STRIP $cwrapper
+	    }
-Currently, it simply execs the wrapper *script* "/bin/sh $output",
-but could eventually absorb all of the scripts functionality and
+	    # Now, create the wrapper script for func_source use:
-exec $objdir/$outputname directly.
+	    func_ltwrapper_scriptname $cwrapper
-*/
+	    $RM $func_ltwrapper_scriptname_result
-EOF
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
-	    cat >> $cwrappersource<<"EOF"
+	    $opt_dry_run || {
-#include <stdio.h>
+	      # note: this script will not be executed, so do not chmod.
-#include <stdlib.h>
+	      if test "x$build" = "x$host" ; then
-#include <unistd.h>
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
-#include <malloc.h>
+	      else
-#include <stdarg.h>
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
-#include <assert.h>
+	      fi
-#include <string.h>
+	    }
-#include <ctype.h>
-#include <sys/stat.h>
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-const char *program_name = NULL;
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-int
-main (int argc, char *argv[])
-{
-char **newargz;
-int i;
-program_name = (char *) xstrdup (base_name (argv[0]));
-DEBUG("(main) argv[0]      : %s\n",argv[0]);
-DEBUG("(main) program_name : %s\n",program_name);
-newargz = XMALLOC(char *, argc+2);
-EOF
-cat >> $cwrappersource <<EOF
-newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-cat >> $cwrappersource <<"EOF"
-newargz[1] = find_executable(argv[0]);
-if (newargz[1] == NULL)
-lt_fatal("Couldn't find %s", argv[0]);
-DEBUG("(main) found exe at : %s\n",newargz[1]);
-/* we know the script has the same name, without the .exe */
-/* so make sure newargz[1] doesn't end in .exe */
-strendzap(newargz[1],".exe");
-for (i = 1; i < argc; i++)
-newargz[i+1] = xstrdup(argv[i]);
-newargz[argc+1] = NULL;
-for (i=0; i<argc+1; i++)
-{
-DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-;
-}
-EOF
-case $host_os in
-	      *cygwin* | *mingw* )
-cat >> $cwrappersource <<EOF
-execv("$SHELL",(char const **)newargz);
-EOF
-;;
-*)
-cat >> $cwrappersource <<EOF
-execv("$SHELL",newargz);
-EOF
-;;
-esac
-cat >> $cwrappersource <<"EOF"
-return 127;
-}
-void *
-xmalloc (size_t num)
-{
-void * p = (void *) malloc (num);
-if (!p)
-lt_fatal ("Memory exhausted");
-return p;
-}
-char *
-xstrdup (const char *string)
-{
-return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-const char *
-base_name (const char *name)
-{
-const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-/* Skip over the disk name in MSDOS pathnames. */
-if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-name += 2;
-#endif
-for (base = name; *name; name++)
-if (IS_DIR_SEPARATOR (*name))
-base = name + 1;
-return base;
-}
-int
-check_executable(const char * path)
-{
-struct stat st;
-DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-if ((!path) || (!*path))
-return 0;
-if ((stat (path, &st) >= 0) &&
-(
-/* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-((st.st_mode & S_IXUSR) == S_IXUSR))
-)
-return 1;
-else
-return 0;
-}
-/* Searches for the full path of the wrapper.  Returns
-newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-int has_slash = 0;
-const char* p;
-const char* p_next;
-/* static buffer for getcwd */
-char tmp[LT_PATHMAX + 1];
-int tmp_len;
-char* concat_name;
-DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-if ((wrapper == NULL) || (*wrapper == '\0'))
-return NULL;
-/* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-{
-concat_name = xstrdup (wrapper);
-if (check_executable(concat_name))
-return concat_name;
-XFREE(concat_name);
-}
-else
-{
-#endif
-if (IS_DIR_SEPARATOR (wrapper[0]))
-{
-concat_name = xstrdup (wrapper);
-if (check_executable(concat_name))
-return concat_name;
-XFREE(concat_name);
-}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-}
-#endif
-for (p = wrapper; *p; p++)
-if (*p == '/')
-{
-has_slash = 1;
-break;
-}
-if (!has_slash)
-{
-/* no slashes; search PATH */
-const char* path = getenv ("PATH");
-if (path != NULL)
-{
-for (p = path; *p; p = p_next)
-{
-const char* q;
-size_t p_len;
-for (q = p; *q; q++)
-if (IS_PATH_SEPARATOR(*q))
-break;
-p_len = q - p;
-p_next = (*q == '\0' ? q : q + 1);
-if (p_len == 0)
-{
-/* empty path: current directory */
-if (getcwd (tmp, LT_PATHMAX) == NULL)
-lt_fatal ("getcwd failed");
-tmp_len = strlen(tmp);
-concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-memcpy (concat_name, tmp, tmp_len);
-concat_name[tmp_len] = '/';
-strcpy (concat_name + tmp_len + 1, wrapper);
-}
-else
-{
-concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-memcpy (concat_name, p, p_len);
-concat_name[p_len] = '/';
-strcpy (concat_name + p_len + 1, wrapper);
-}
-if (check_executable(concat_name))
-return concat_name;
-XFREE(concat_name);
-}
-}
-/* not found in PATH; assume curdir */
-}
-/* Relative path | not found in path: prepend cwd */
-if (getcwd (tmp, LT_PATHMAX) == NULL)
-lt_fatal ("getcwd failed");
-tmp_len = strlen(tmp);
-concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-memcpy (concat_name, tmp, tmp_len);
-concat_name[tmp_len] = '/';
-strcpy (concat_name + tmp_len + 1, wrapper);
-if (check_executable(concat_name))
-return concat_name;
-XFREE(concat_name);
-return NULL;
-}
-char *
-strendzap(char *str, const char *pat)
-{
-size_t len, patlen;
-assert(str != NULL);
-assert(pat != NULL);
-len = strlen(str);
-patlen = strlen(pat);
-if (patlen <= len)
-{
-str += len - patlen;
-if (strcmp(str, pat) == 0)
-*str = '\0';
-}
-return str;
-}
-static void
-lt_error_core (int exit_status, const char * mode,
-const char * message, va_list ap)
-{
-fprintf (stderr, "%s: %s: ", program_name, mode);
-vfprintf (stderr, message, ap);
-fprintf (stderr, ".\n");
-if (exit_status >= 0)
-exit (exit_status);
-}
-void
-lt_fatal (const char *message, ...)
-{
-va_list ap;
-va_start (ap, message);
-lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-va_end (ap);
-}
-EOF
-# we should really use a build-platform specific compiler
-# here, but OTOH, the wrappers (shell script and this C one)
-# are only useful if you want to execute the "real" binary.
-# Since the "real" binary is built for $host, then this
-# wrapper might as well be built for $host, too.
-$run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-;;
-esac
-$rm $output
-trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-	$echo > $output "\
-#! $SHELL
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-relink_command=\"$relink_command\"
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-# install mode needs the following variable:
-notinst_deplibs='$notinst_deplibs'
-else
-# When we are sourced in execute mode, \$file and \$echo are already set.
-if test \"\$libtool_execute_magic\" != \"$magic\"; then
-echo=\"$qecho\"
-file=\"\$0\"
-# Make sure echo works.
-if test \"X\$1\" = X--no-reexec; then
-# Discard the --no-reexec flag, and continue.
-shift
-elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-# Yippee, \$echo works!
-:
-else
-# Restart under the correct shell, and then maybe \$echo will work.
-exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-fi
-fi\
-"
-	$echo >> $output "\
-# Find the directory that this script lives in.
-thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-# Follow symbolic links until we get to the real thisdir.
-file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-while test -n \"\$file\"; do
-destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-# If there was a directory component, then change thisdir.
-if test \"x\$destdir\" != \"x\$file\"; then
-case \"\$destdir\" in
-[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-*) thisdir=\"\$thisdir/\$destdir\" ;;
-esac
-fi
-file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-done
-# Try to get the absolute directory name.
-absdir=\`cd \"\$thisdir\" && pwd\`
-test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-program=lt-'$outputname'$exeext
-progdir=\"\$thisdir/$objdir\"
-if test ! -f \"\$progdir/\$program\" || \\
-{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-file=\"\$\$-\$program\"
-if test ! -d \"\$progdir\"; then
-$mkdir \"\$progdir\"
-else
-$rm \"\$progdir/\$file\"
-fi"
-	  $echo >> $output "\
-# relink executable if necessary
-if test -n \"\$relink_command\"; then
-if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-fi
-fi
-$mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-{ $rm \"\$progdir/\$program\";
-$mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-$rm \"\$progdir/\$file\"
-fi"
-	else
-	  $echo >> $output "\
-program='$outputname'
-progdir=\"\$thisdir/$objdir\"
-"
-	fi
-	$echo >> $output "\
-if test -f \"\$progdir/\$program\"; then"
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-# Add our own library path to $shlibpath_var
-$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-# Some systems cannot cope with colon-terminated $shlibpath_var
-# The second colon is a workaround for a bug in BeOS R4 sed
-$shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-export $shlibpath_var
-"
-	fi
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-# Add the dll search path components to the executable PATH
-PATH=$dllsearchpath:\$PATH
-"
-	fi
-	$echo >> $output "\
-if test \"\$libtool_execute_magic\" != \"$magic\"; then
-# Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
 	  ;;
+	  * )
-	*)
+	    $RM $output
-	  $echo >> $output "\
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
+	    func_emit_wrapper no > $output
+	    chmod +x $output
 	  ;;
 	esac
-	$echo >> $output "\
+}
-\$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-exit $EXIT_FAILURE
-fi
-else
-# The program doesn't exist.
-\$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-\$echo \"This script is just a wrapper for \$program.\" 1>&2
-$echo \"See the $PACKAGE documentation for more information.\" 1>&2
-exit $EXIT_FAILURE
-fi
-fi\
-"
-	chmod +x $output
-fi
 exit $EXIT_SUCCESS
 ;;
 esac
 # See if we need to build an old-fashioned archive.
 for oldlib in $oldlibs; do
 if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
+	oldobjs="$libobjs_save $symfileobj"
 	addlibs="$convenience"
 	build_libtool_libs=no
 else
 	if test "$build_libtool_libs" = module; then
 	  oldobjs="$libobjs_save"
 	  build_libtool_libs=no
 	else
 	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    oldobjs="$oldobjs $symfileobj"
+	  fi
 	fi
 	addlibs="$old_convenience"
 fi
 if test -n "$addlibs"; then
 	oldobjs="$oldobjs $func_extract_archives_result"
 fi
 # Do each command in the archive commands.
 if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-cmds=$old_archive_from_new_cmds
+	cmds=$old_archive_from_new_cmds
 else
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+	  func_extract_archives $gentop $dlprefiles
+	  oldobjs="$oldobjs $func_extract_archives_result"
+	fi
 	# POSIX demands no paths to be encoded in archives.  We have
 	# to avoid creating archives with duplicate basenames if we
 	# might have to extract them afterwards, e.g., when creating a
 	# static archive out of a convenience library, or when linking
 	# the entirety of a libtool archive into another (currently
 	# not supported by libtool).
 	if (for obj in $oldobjs
 	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $echo "copying selected object files to avoid basename conflicts..."
+	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
-	  if test -z "$gentop"; then
+	  generated="$generated $gentop"
-	    gentop="$output_objdir/${outputname}x"
+	  func_mkdir_p "$gentop"
-	    generated="$generated $gentop"
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
-	    fi
-	  fi
 	  save_oldobjs=$oldobjs
 	  oldobjs=
 	  counter=1
 	  for obj in $save_oldobjs
 	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
 	    case " $oldobjs " in
 	    " ") oldobjs=$obj ;;
 	    *[\ /]"$objbase "*)
 	      while :; do
 		# Make sure we don't pick an alternate name that also
 		# overlaps.
 		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
+		func_arith $counter + 1
+		counter=$func_arith_result
 		case " $oldobjs " in
 		*[\ /]"$newobj "*) ;;
 		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
 		esac
 	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
 	      oldobjs="$oldobjs $gentop/$newobj"
 	      ;;
 	    *) oldobjs="$oldobjs $obj" ;;
 	    esac
 	  done
 	fi
 	eval cmds=\"$old_archive_cmds\"
-	if len=`expr "X$cmds" : ".*"` &&
+	func_len " $cmds"
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
 	  cmds=$old_archive_cmds
 	else
 	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
+	  func_verbose "using piecewise archive linking..."
 	  save_RANLIB=$RANLIB
 	  RANLIB=:
 	  objlist=
 	  concat_cmds=
 	  save_oldobjs=$oldobjs
+	  oldobjs=
 	  # Is there a better way of finding the last object in the list?
 	  for obj in $save_oldobjs
 	  do
 	    last_oldobj=$obj
 	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
 	  for obj in $save_oldobjs
 	  do
-	    oldobjs="$objlist $obj"
+	    func_len " $obj"
-	    objlist="$objlist $obj"
+	    func_arith $len + $func_len_result
-	    eval test_cmds=\"$old_archive_cmds\"
+	    len=$func_arith_result
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	    func_append objlist " $obj"
-	       test "$len" -le "$max_cmd_len"; then
+	    if test "$len" -lt "$max_cmd_len"; then
 	      :
 	    else
 	      # the above command should be used before it gets too long
 	      oldobjs=$objlist
 	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
+		RANLIB=$save_RANLIB
 	      fi
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
 	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
 	      objlist=
+	      len=$len0
 	    fi
 	  done
 	  RANLIB=$save_RANLIB
 	  oldobjs=$objlist
 	  if test "X$oldobjs" = "X" ; then
 	  else
 	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
 	  fi
 	fi
 fi
-save_ifs="$IFS"; IFS='~'
+func_execute_cmds "$cmds" 'exit $?'
-for cmd in $cmds; do
-eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-done
-IFS="$save_ifs"
 done
-if test -n "$generated"; then
+test -n "$generated" && \
-$show "${rm}r$generated"
+func_show_eval "${RM}r$generated"
-$run ${rm}r$generated
-fi
 # Now create the libtool archive.
 case $output in
 *.la)
 old_library=
 test "$build_old_libs" = yes && old_library="$libname.$libext"
-$show "creating $output"
+func_verbose "creating $output"
 # Preserve any variables that may affect compiler behavior
 for var in $variables_saved_for_relink; do
 	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
 	elif eval var_value=\$$var; test -z "$var_value"; then
 	  relink_command="$var=; export $var; $relink_command"
 	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  func_quote_for_eval "$var_value"
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	fi
 done
 # Quote the link command for shipping.
 relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
 if test "$hardcode_automatic" = yes ; then
 	relink_command=
 fi
 # Only create the output if not a dry run.
-if test -z "$run"; then
+$opt_dry_run || {
 	for installed in no yes; do
 	  if test "$installed" = yes; then
 	    if test -z "$install_libdir"; then
 	      break
 	    fi
 	    # Replace all uninstalled libtool libraries with the installed ones
 	    newdependency_libs=
 	    for deplib in $dependency_libs; do
 	      case $deplib in
 	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		func_basename "$deplib"
+		name="$func_basename_result"
 		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
+		test -z "$libdir" && \
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
-		  exit $EXIT_FAILURE
-		fi
 		newdependency_libs="$newdependency_libs $libdir/$name"
 		;;
 	      *) newdependency_libs="$newdependency_libs $deplib" ;;
 	      esac
 	    done
 	    dependency_libs="$newdependency_libs"
 	    newdlfiles=
 	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      case $lib in
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      *.la)
-	      if test -z "$libdir"; then
+	        func_basename "$lib"
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		name="$func_basename_result"
-		exit $EXIT_FAILURE
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      fi
+		test -z "$libdir" && \
-	      newdlfiles="$newdlfiles $libdir/$name"
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlfiles="$newdlfiles $libdir/$name"
+		;;
+	      *) newdlfiles="$newdlfiles $lib" ;;
+	      esac
 	    done
 	    dlfiles="$newdlfiles"
 	    newdlprefiles=
 	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      case $lib in
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      *.la)
-	      if test -z "$libdir"; then
+		# Only pass preopened files to the pseudo-archive (for
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		# eventual linking with the app. that links it) if we
-		exit $EXIT_FAILURE
+		# didn't already link the preopened objects directly into
-	      fi
+		# the library:
-	      newdlprefiles="$newdlprefiles $libdir/$name"
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlprefiles="$newdlprefiles $libdir/$name"
+		;;
+	      esac
 	    done
 	    dlprefiles="$newdlprefiles"
 	  else
 	    newdlfiles=
 	    for lib in $dlfiles; do
 	      esac
 	      newdlprefiles="$newdlprefiles $abs"
 	    done
 	    dlprefiles="$newdlprefiles"
 	  fi
-	  $rm $output
+	  $RM $output
 	  # place dlname in correct position for cygwin
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
-	  $echo > $output "\
+	  $ECHO > $output "\
 # $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 #
 # Please DO NOT delete this file!
 # It is necessary for linking the library.
 # The name that we can dlopen(3).
 library_names='$library_names'
 # The name of the static archive.
 old_library='$old_library'
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
 # Libraries that this one depends upon.
 dependency_libs='$dependency_libs'
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
 # Version information for $libname.
 current=$current
 age=$age
 revision=$revision
 dlpreopen='$dlprefiles'
 # Directory that this library needs to be installed in:
 libdir='$install_libdir'"
 	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
+	    $ECHO >> $output "\
 relink_command=\"$relink_command\""
 	  fi
 	done
-fi
+}
 # Do a symbolic link so that the libtool archive can be found in
 # LD_LIBRARY_PATH before the program is installed.
-$show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
-$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
 ;;
 esac
 exit $EXIT_SUCCESS
-;;
+}
-# libtool install mode
+{ test "$mode" = link || test "$mode" = relink; } &&
-install)
+func_mode_link ${1+"$@"}
-modename="$modename: install"
-# There may be an optional sh(1) argument at the beginning of
+# func_mode_uninstall arg...
-# install_prog (especially on Windows NT).
+func_mode_uninstall ()
-if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+{
-# Allow the use of GNU shtool's install command.
+$opt_debug
-$echo "X$nonopt" | grep shtool > /dev/null; then
+RM="$nonopt"
-# Aesthetically quote it.
-arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-case $arg in
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-esac
-install_prog="$arg "
-arg="$1"
-shift
-else
-install_prog=
-arg=$nonopt
-fi
-# The real first argument should be the name of the installation program.
-# Aesthetically quote it.
-arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-case $arg in
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-arg="\"$arg\""
-;;
-esac
-install_prog="$install_prog$arg"
-# We need to accept at least all the BSD install flags.
-dest=
 files=
-opts=
+rmforce=
-prev=
+exit_status=0
-install_type=
-isdir=no
-stripme=
-for arg
-do
-if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-fi
-case $arg in
--d) isdir=yes ;;
--f)
-	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
--g | -m | -o) prev=$arg ;;
--s)
-	stripme=" -s"
-	continue
-	;;
--*)
-	;;
-*)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-esac
-# Aesthetically quote the argument.
-arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-case $arg in
-*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-esac
-install_prog="$install_prog $arg"
-done
-if test -z "$install_prog"; then
-$echo "$modename: you must specify an install program" 1>&2
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
-if test -n "$prev"; then
-$echo "$modename: the \`$prev' option requires an argument" 1>&2
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
-if test -z "$files"; then
-if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-else
-	$echo "$modename: you must specify a destination" 1>&2
-fi
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
-# Strip any trailing slash from the destination.
-dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-# Check to see that the destination is a directory.
-test -d "$dest" && isdir=yes
-if test "$isdir" = yes; then
-destdir="$dest"
-destname=
-else
-destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-test "X$destdir" = "X$dest" && destdir=.
-destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-# Not a directory, so check to see that there is only one file specified.
-set dummy $files
-if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-fi
-fi
-case $destdir in
-[\\/]* | [A-Za-z]:[\\/]*) ;;
-*)
-for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-done
-;;
-esac
 # This variable tells wrapper scripts just to set variables rather
 # than running their programs.
 libtool_install_magic="$magic"
-staticlibs=
-future_libdirs=
-current_libdirs=
-for file in $files; do
-# Do each installation.
-case $file in
-*.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-*.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
-	  else
-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
-	  fi
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-$show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-$run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-*.lo)
-	# Install (i.e. copy) a libtool object.
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-*)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-esac
-done
-for file in $staticlibs; do
-name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-# Set up the ranlib parameters.
-oldlib="$destdir/$name"
-$show "$install_prog $file $oldlib"
-$run eval "$install_prog \$file \$oldlib" || exit $?
-if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-fi
-# Do each command in the postinstall commands.
-cmds=$old_postinstall_cmds
-save_ifs="$IFS"; IFS='~'
-for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-done
-IFS="$save_ifs"
-done
-if test -n "$future_libdirs"; then
-$echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-fi
-if test -n "$current_libdirs"; then
-# Maybe just do a dry run.
-test -n "$run" && current_libdirs=" -n$current_libdirs"
-exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-else
-exit $EXIT_SUCCESS
-fi
-;;
-# libtool finish mode
-finish)
-modename="$modename: finish"
-libdirs="$nonopt"
-admincmds=
-if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-for dir
-do
-	libdirs="$libdirs $dir"
-done
-for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-$cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-$cmds"
-	fi
-done
-fi
-# Exit here if they wanted silent mode.
-test "$show" = : && exit $EXIT_SUCCESS
-$echo "X----------------------------------------------------------------------" | $Xsed
-$echo "Libraries have been installed in:"
-for libdir in $libdirs; do
-$echo "   $libdir"
-done
-$echo
-$echo "If you ever happen to want to link against installed libraries"
-$echo "in a given directory, LIBDIR, you must either use libtool, and"
-$echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-$echo "flag during linking and do at least one of the following:"
-if test -n "$shlibpath_var"; then
-$echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-$echo "     during execution"
-fi
-if test -n "$runpath_var"; then
-$echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-$echo "     during linking"
-fi
-if test -n "$hardcode_libdir_flag_spec"; then
-libdir=LIBDIR
-eval flag=\"$hardcode_libdir_flag_spec\"
-$echo "   - use the \`$flag' linker flag"
-fi
-if test -n "$admincmds"; then
-$echo "   - have your system administrator run these commands:$admincmds"
-fi
-if test -f /etc/ld.so.conf; then
-$echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-fi
-$echo
-$echo "See any operating system documentation about shared libraries for"
-$echo "more information, such as the ld(1) and ld.so(8) manual pages."
-$echo "X----------------------------------------------------------------------" | $Xsed
-exit $EXIT_SUCCESS
-;;
-# libtool execute mode
-execute)
-modename="$modename: execute"
-# The first argument is the command name.
-cmd="$nonopt"
-if test -z "$cmd"; then
-$echo "$modename: you must specify a COMMAND" 1>&2
-$echo "$help"
-exit $EXIT_FAILURE
-fi
-# Handle -dlopen flags immediately.
-for file in $execute_dlfiles; do
-if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-fi
-dir=
-case $file in
-*.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	# Read the libtool library.
-	dlname=
-	library_names=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	;;
-*.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-*)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-esac
-# Get the absolute pathname.
-absdir=`cd "$dir" && pwd`
-test -n "$absdir" && dir="$absdir"
-# Now add the directory to shlibpath_var.
-if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-fi
-done
-# This variable tells wrapper scripts just to set shlibpath_var
-# rather than running their programs.
-libtool_execute_magic="$magic"
-# Check if any of the arguments is a wrapper script.
-args=
-for file
-do
-case $file in
--*) ;;
-*)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-esac
-# Quote arguments (to preserve shell metacharacters).
-file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-args="$args \"$file\""
-done
-if test -z "$run"; then
-if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-fi
-# Restore saved environment variables
-if test "${save_LC_ALL+set}" = set; then
-	LC_ALL="$save_LC_ALL"; export LC_ALL
-fi
-if test "${save_LANG+set}" = set; then
-	LANG="$save_LANG"; export LANG
-fi
-# Now prepare to actually exec the command.
-exec_cmd="\$cmd$args"
-else
-# Display what would be done.
-if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-fi
-$echo "$cmd$args"
-exit $EXIT_SUCCESS
-fi
-;;
-# libtool clean and uninstall mode
-clean | uninstall)
-modename="$modename: $mode"
-rm="$nonopt"
-files=
-rmforce=
-exit_status=0
-# This variable tells wrapper scripts just to set variables rather
-# than running their programs.
-libtool_install_magic="$magic"
 for arg
 do
 case $arg in
--f) rm="$rm $arg"; rmforce=yes ;;
+-f) RM="$RM $arg"; rmforce=yes ;;
--*) rm="$rm $arg" ;;
+-*) RM="$RM $arg" ;;
 *) files="$files $arg" ;;
 esac
 done
-if test -z "$rm"; then
+test -z "$RM" && \
-$echo "$modename: you must specify an RM program" 1>&2
+func_fatal_help "you must specify an RM program"
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-fi
 rmdirs=
 origobjdir="$objdir"
 for file in $files; do
-dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+func_dirname "$file" "" "."
-if test "X$dir" = "X$file"; then
+dir="$func_dirname_result"
-	dir=.
+if test "X$dir" = X.; then
 	objdir="$origobjdir"
 else
 	objdir="$dir/$origobjdir"
 fi
-name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+func_basename "$file"
+name="$func_basename_result"
 test "$mode" = uninstall && objdir="$dir"
 # Remember objdir for removal later, being careful to avoid duplicates
 if test "$mode" = clean; then
 	case " $rmdirs " in
 	  *) rmdirs="$rmdirs $objdir" ;;
 	esac
 fi
 # Don't error if the file doesn't exist and rm -f was used.
-if (test -L "$file") >/dev/null 2>&1 \
+if { test -L "$file"; } >/dev/null 2>&1 ||
-	|| (test -h "$file") >/dev/null 2>&1 \
+	 { test -h "$file"; } >/dev/null 2>&1 ||
-	|| test -f "$file"; then
+	 test -f "$file"; then
 	:
 elif test -d "$file"; then
 	exit_status=1
 	continue
 elif test "$rmforce" = yes; then
 rmfiles="$file"
 case $name in
 *.la)
 	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_p "$file"; then
-	  . $dir/$name
+	  func_source $dir/$name
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
 	    rmfiles="$rmfiles $objdir/$n"
 	  done
 	    case "  $library_names " in
 	    # "  " in the beginning catches empty $dlname
 	    *" $dlname "*) ;;
 	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
 	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
 	    fi
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
 	  esac
 	fi
 	;;
 *.lo)
 	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_p "$file"; then
 	  # Read the .lo file
-	  . $dir/$name
+	  func_source $dir/$name
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
+	  if test -n "$pic_object" &&
-	     && test "$pic_object" != none; then
+	     test "$pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$pic_object"
 	  fi
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
+	  if test -n "$non_pic_object" &&
-	     && test "$non_pic_object" != none; then
+	     test "$non_pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$non_pic_object"
 	  fi
 	fi
 	;;
 *)
 	if test "$mode" = clean ; then
 	  noexename=$name
 	  case $file in
 	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
+	    func_stripname '' '.exe' "$file"
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
 	    rmfiles="$rmfiles $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  if func_ltwrapper_p "$file"; then
-	    relink_command=
+	    if func_ltwrapper_executable_p "$file"; then
-	    . $dir/$noexename
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
 	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
 	    if test "$fast_install" = yes && test -n "$relink_command"; then
 	    fi
 	  fi
 	fi
 	;;
 esac
-$show "$rm $rmfiles"
+func_show_eval "$RM $rmfiles" 'exit_status=1'
-$run $rm $rmfiles || exit_status=1
 done
 objdir="$origobjdir"
 # Try to remove the ${objdir}s in the directories where we deleted files
 for dir in $rmdirs; do
 if test -d "$dir"; then
-	$show "rmdir $dir"
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
-	$run rmdir $dir >/dev/null 2>&1
 fi
 done
 exit $exit_status
-;;
+}
-"")
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
-$echo "$modename: you must specify a MODE" 1>&2
+func_mode_uninstall ${1+"$@"}
-$echo "$generic_help" 1>&2
-exit $EXIT_FAILURE
+test -z "$mode" && {
-;;
+help="$generic_help"
-esac
+func_fatal_help "you must specify a MODE"
+}
-if test -z "$exec_cmd"; then
-$echo "$modename: invalid operation mode \`$mode'" 1>&2
+test -z "$exec_cmd" && \
-$echo "$generic_help" 1>&2
+func_fatal_help "invalid operation mode \`$mode'"
-exit $EXIT_FAILURE
-fi
-fi # test -z "$show_help"
 if test -n "$exec_cmd"; then
-eval exec $exec_cmd
+eval exec "$exec_cmd"
 exit $EXIT_FAILURE
 fi
-# We need to display help for each of the modes.
+exit $exit_status
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-Provide generalized library-building support services.
---config          show all configuration variables
---debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
---features        display basic configuration information and exit
---finish          same as \`--mode=finish'
---help            display this help message and exit
---mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
---quiet           same as \`--silent'
---silent          don't print informational messages
---tag=TAG         use configuration variables from tag TAG
---version         print version information
-MODE must be one of the following:
-clean           remove files from the build directory
-compile         compile a source file into a libtool object
-execute         automatically set library path, then run a program
-finish          complete the installation of libtool libraries
-install         install libraries or executables
-link            create a library or an executable
-uninstall       remove libraries from an installed directory
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-Report bugs to <bug-libtool@gnu.org>."
-exit $EXIT_SUCCESS
-;;
-clean)
-$echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-Remove files from the build directory.
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-;;
-compile)
-$echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-Compile a source file into a libtool library object.
-This mode accepts the following additional options:
--o OUTPUT-FILE    set the output file name to OUTPUT-FILE
--prefer-pic       try to building PIC objects only
--prefer-non-pic   try to building non-PIC objects only
--static           always build a \`.o' file suitable for static linking
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-;;
-execute)
-$echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-Automatically set library path, then run a program.
-This mode accepts the following additional options:
--dlopen FILE      add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-Then, COMMAND is executed, with ARGS as arguments."
-;;
-finish)
-$echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-Complete the installation of libtool libraries.
-Each LIBDIR is a directory that contains libtool libraries.
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-;;
-install)
-$echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-Install executables or libraries.
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-;;
-link)
-$echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-Link object files or libraries together to form another library, or to
-create an executable program.
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-The following components of LINK-COMMAND are treated specially:
--all-static       do not do any dynamic linking at all
--avoid-version    do not add a version suffix if possible
--dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
--dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
--export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
--export-symbols SYMFILE
-		    try to export only the symbols listed in SYMFILE
--export-symbols-regex REGEX
-		    try to export only the symbols matching REGEX
--LLIBDIR          search LIBDIR for required installed libraries
--lNAME            OUTPUT-FILE requires the installed library libNAME
--module           build a library that can dlopened
--no-fast-install  disable the fast-install mode
--no-install       link a not-installable executable
--no-undefined     declare that a library does not refer to external symbols
--o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
--objectlist FILE  Use a list of object files found in FILE to specify objects
--precious-files-regex REGEX
-don't remove output files matching REGEX
--release RELEASE  specify package release information
--rpath LIBDIR     the created library will eventually be installed in LIBDIR
--R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
--static           do not do any dynamic linking of libtool libraries
--version-info CURRENT[:REVISION[:AGE]]
-		    specify library version info [each variable defaults to 0]
-All other options (arguments beginning with \`-') are ignored.
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-;;
-uninstall)
-$echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-Remove libraries from an installation directory.
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-;;
-*)
-$echo "$modename: invalid operation mode \`$mode'" 1>&2
-$echo "$help" 1>&2
-exit $EXIT_FAILURE
-;;
-esac
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-exit $?
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
 # choices, we go for a static library, that is the most portable,
 # since we can't tell whether shared libraries were disabled because
 # time on that platform, so we default to a shared-only configuration.
 # If a disable-shared tag is given, we'll fallback to a static-only
 # configuration.  But we'll never go from static-only to shared-only.
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
 # ### END LIBTOOL TAG CONFIG: disable-shared
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # ### END LIBTOOL TAG CONFIG: disable-static
 # Local Variables:
 # mode:shell-script
 # sh-indentation:2
 # End:
+# vi:sw=2

Mercurial > sdl-ios-xcode

comparison build-scripts/ltmain.sh @ 3085:4800979de337