sdl-ios-xcode: acinclude/libtool.m4 comparison

comparison acinclude/libtool.m4 @ 3342:3da232c5980a

Split acinclude.m4 into its constituent parts for easy upgrading

author	Sam Lantinga <slouken@libsdl.org>
date	Sun, 04 Oct 2009 20:44:04 +0000
parents
children	cce11d33d5c6

comparison

equal deleted inserted replaced

-:710139a1692d
+:3da232c5980a
+##############################################################################
+# Based on libtool-2.2.6a
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+# serial 56 LT_INIT
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+[m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+[$2])])
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+*\ * | *\	*)
+AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+_LT_SETUP
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+case $cc_temp in
+compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+\-*) ;;
+*) break;;
+esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+setopt NO_GLOB_SUBST
+fi
+_LT_CHECK_OBJDIR
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
+case $host_os in
+aix3*)
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+COLLECT_NAMES=
+export COLLECT_NAMES
+fi
+;;
+esac
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+_LT_CC_BASENAME([$compiler])
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+_LT_PATH_MAGIC
+fi
+;;
+esac
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+[m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+[$1
+])])])
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+[m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+[$1
+])])])
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+[['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+[lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+[0], [m4_fatal([$0: too few arguments: $#])],
+[1], [m4_fatal([$0: too few arguments: $#: $1])],
+[2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+[3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+[lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+[0], [_libtool_name=[$]$1],
+[1], [_libtool_name=$lt_[]$1],
+[2], [_libtool_name=$lt_[]$1],
+[_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+[m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+[m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+[AC_CONFIG_COMMANDS([libtool],
+[$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+dnl If the libtool generation code is destined for config.status,
+dnl expand the accumulated commands and init code now:
+[AC_CONFIG_COMMANDS([libtool],
+[_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+*[[\\\\\\\`\\"\\\$]]*)
+eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+;;
+*)
+eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+;;
+esac
+done
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+*[[\\\\\\\`\\"\\\$]]*)
+eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+;;
+*)
+eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+;;
+esac
+done
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+;;
+esac
+_LT_OUTPUT_LIBTOOL_INIT
+])
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+echo
+AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+Usage: $[0] [[OPTIONS]]
+-h, --help      print this help, then exit
+-V, --version   print version number, then exit
+-q, --quiet     do not print progress messages
+-d, --debug     don't remove temporary files
+Report bugs to <bug-libtool@gnu.org>."
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+while test $[#] != 0
+do
+case $[1] in
+--version | --v* | -V )
+echo "$lt_cl_version"; exit 0 ;;
+--help | --h* | -h )
+echo "$lt_cl_help"; exit 0 ;;
+--debug | --d* | -d )
+debug=: ;;
+--quiet | --q* | --silent | --s* | -q )
+lt_cl_silent=: ;;
+-*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+*) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+esac
+shift
+done
+if $lt_cl_silent; then
+exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+lt_cl_success=:
+test "$silent" = yes &&
+lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+m4_if(_LT_TAG, [C], [
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+setopt NO_GLOB_SUBST
+fi
+cfgfile="${ofile}T"
+trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+$RM "$cfgfile"
+cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+_LT_EOF
+case $host_os in
+aix3*)
+cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+COLLECT_NAMES=
+export COLLECT_NAMES
+fi
+_LT_EOF
+;;
+esac
+_LT_PROG_LTMAIN
+# We use sed instead of cat because bash on DJGPP gets confused if
+# if finds mixed CR/LF and LF-only lines.  Since sed operates in
+# text mode, it properly converts lines to CR/LF.  This bash problem
+# is reportedly fixed, but why not run on old versions too?
+sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+|| (rm -f "$cfgfile"; exit 1)
+_LT_PROG_XSI_SHELLFNS
+sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+|| (rm -f "$cfgfile"; exit 1)
+mv -f "$cfgfile" "$ofile" ||
+(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+PACKAGE='$PACKAGE'
+VERSION='$VERSION'
+TIMESTAMP='$TIMESTAMP'
+RM='$RM'
+ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+[C],			[_LT_LANG(C)],
+[C++],		[_LT_LANG(CXX)],
+[Java],		[_LT_LANG(GCJ)],
+[Fortran 77],		[_LT_LANG(F77)],
+[Fortran],		[_LT_LANG(FC)],
+[Windows Resource],	[_LT_LANG(RC)],
+[m4_ifdef([_LT_LANG_]$1[_CONFIG],
+[_LT_LANG($1)],
+[m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+[LT_SUPPORTED_TAG([$1])dnl
+m4_append([_LT_TAGS], [$1 ])dnl
+m4_define([_LT_LANG_]$1[_enabled], [])dnl
+_LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+[LT_LANG(CXX)],
+[m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+[LT_LANG(F77)],
+[m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+[LT_LANG(FC)],
+[m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+[LT_LANG(GCJ)],
+[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+[LT_LANG(GCJ)],
+[AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+[LT_LANG(GCJ)],
+[m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+[LT_LANG(RC)],
+[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+case $host_os in
+rhapsody* | darwin*)
+AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+AC_CHECK_TOOL([LIPO], [lipo], [:])
+AC_CHECK_TOOL([OTOOL], [otool], [:])
+AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+_LT_DECL([], [DSYMUTIL], [1],
+[Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+_LT_DECL([], [NMEDIT], [1],
+[Tool to change global to local symbols on Mac OS X])
+_LT_DECL([], [LIPO], [1],
+[Tool to manipulate fat objects and archives on Mac OS X])
+_LT_DECL([], [OTOOL], [1],
+[ldd/readelf like tool for Mach-O binaries on Mac OS X])
+_LT_DECL([], [OTOOL64], [1],
+[ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+[lt_cv_apple_cc_single_mod=no
+if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+_lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+fi])
+AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+[lt_cv_ld_exported_symbols_list],
+[lt_cv_ld_exported_symbols_list=no
+save_LDFLAGS=$LDFLAGS
+echo "_main" > conftest.sym
+LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+])
+case $host_os in
+rhapsody* | darwin1.[[012]])
+_lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+darwin1.*)
+_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+darwin*) # darwin 5.x on
+# if running on 10.5 or later, the deployment target defaults
+# to the OS version, if on x86, and 10.4, the deployment
+# target defaults to 10.4. Don't you love it?
+case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+esac
+;;
+esac
+if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+_lt_dar_single_mod='$single_module'
+fi
+if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+_lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+else
+_lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+fi
+if test "$DSYMUTIL" != ":"; then
+_lt_dsymutil='~$DSYMUTIL $lib || :'
+else
+_lt_dsymutil=
+fi
+;;
+esac
+])
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(whole_archive_flag_spec, $1)=''
+_LT_TAGVAR(link_all_deplibs, $1)=yes
+_LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+case $cc_basename in
+ifort*) _lt_dar_can_shared=yes ;;
+*) _lt_dar_can_shared=$GCC ;;
+esac
+if test "$_lt_dar_can_shared" = "yes"; then
+output_verbose_link_cmd=echo
+_LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+_LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+_LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+_LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+_LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+fi
+],[])
+else
+_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+])
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+/Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+}'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_SYS_MODULE_PATH_AIX
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+case X$lt_ECHO in
+X*--fallback-echo)
+# Remove one level of quotation (which was required for Make).
+ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+;;
+esac
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+# Discard the --no-reexec flag, and continue.
+shift
+elif test "X[$]1" = X--fallback-echo; then
+# Avoid inline document here, it may be left over
+:
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+# Yippee, $ECHO works!
+:
+else
+# Restart under the correct shell.
+exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+if test "X[$]1" = X--fallback-echo; then
+# used as fallback echo
+shift
+cat <<_LT_EOF
+[$]*
+_LT_EOF
+exit 0
+fi
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+if test -z "$lt_ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+then
+break
+fi
+done
+fi
+if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+test "X$echo_testing_string" = "X$echo_test_string"; then
+:
+else
+# The Solaris, AIX, and Digital Unix default echo programs unquote
+# backslashes.  This makes it impossible to quote backslashes using
+#   echo "$something" | sed 's/\\/\\\\/g'
+#
+# So, first we look for a working echo in the user's PATH.
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+for dir in $PATH /usr/ucb; do
+IFS="$lt_save_ifs"
+if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+test "X$echo_testing_string" = "X$echo_test_string"; then
+ECHO="$dir/echo"
+break
+fi
+done
+IFS="$lt_save_ifs"
+if test "X$ECHO" = Xecho; then
+# We didn't find a better echo, so look for alternatives.
+if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+test "X$echo_testing_string" = "X$echo_test_string"; then
+# This shell has a builtin print -r that does the trick.
+ECHO='print -r'
+elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+# If we have ksh, try running configure again with it.
+ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+export ORIGINAL_CONFIG_SHELL
+CONFIG_SHELL=/bin/ksh
+export CONFIG_SHELL
+exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+else
+# Try using printf.
+ECHO='printf %s\n'
+if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+else
+	  # maybe with a smaller string...
+	  prev=:
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+fi
+fi
+fi
+fi
+fi
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+[An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+[AS_HELP_STRING([--disable-libtool-lock],
+[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+# Find out which ABI we are using.
+echo 'int i;' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+case `/usr/bin/file conftest.$ac_objext` in
+*ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+*ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+esac
+fi
+rm -rf conftest*
+;;
+*-*-irix6*)
+# Find out which ABI we are using.
+echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+if test "$lt_cv_prog_gnu_ld" = yes; then
+case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+esac
+else
+case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+esac
+fi
+fi
+rm -rf conftest*
+;;
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+# Find out which ABI we are using.
+echo 'int i;' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+case `/usr/bin/file conftest.o` in
+*32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+*64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+esac
+fi
+rm -rf conftest*
+;;
+*-*-sco3.2v5*)
+# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+SAVE_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -belf"
+AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+[AC_LANG_PUSH(C)
+AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+AC_LANG_POP])
+if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+CFLAGS="$SAVE_CFLAGS"
+fi
+;;
+sparc*-*solaris*)
+# Find out which ABI we are using.
+echo 'int i;' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+case `/usr/bin/file conftest.o` in
+*64-bit*)
+case $lt_cv_prog_gnu_ld in
+yes*) LD="${LD-ld} -m elf64_sparc" ;;
+*)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+esac
+;;
+esac
+fi
+rm -rf conftest*
+;;
+esac
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+[Commands used to install an old-style archive])
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+if test -n "$RANLIB"; then
+case $host_os in
+openbsd*)
+old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+;;
+*)
+old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+;;
+esac
+old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+[Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+[$2=no
+m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+lt_compiler_flag="$3"
+# Insert the option either (1) after the last *FLAGS variable, or
+# (2) before a word containing "conftest.", or (3) at the end.
+# Note that $ac_compile itself does not contain backslashes and begins
+# with a dollar sign (not a hyphen), so the echo should work correctly.
+# The option is referenced via a variable to avoid confusing sed.
+lt_compile=`echo "$ac_compile" | $SED \
+-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+-e 's:$: $lt_compiler_flag:'`
+(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+(eval "$lt_compile" 2>conftest.err)
+ac_status=$?
+cat conftest.err >&AS_MESSAGE_LOG_FD
+echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+if (exit $ac_status) && test -s "$ac_outfile"; then
+# The compiler can only warn and ignore the option if not recognized
+# So say no if there are warnings other than the usual output.
+$ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+$2=yes
+fi
+fi
+$RM conftest*
+])
+if test x"[$]$2" = xyes; then
+m4_if([$5], , :, [$5])
+else
+m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+[$2=no
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $3"
+echo "$lt_simple_link_test_code" > conftest.$ac_ext
+if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+# The linker can only warn and ignore the option if not recognized
+# So say no if there are warnings
+if test -s conftest.err; then
+# Append any errors to the config.log.
+cat conftest.err 1>&AS_MESSAGE_LOG_FD
+$ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+$SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+if diff conftest.exp conftest.er2 >/dev/null; then
+$2=yes
+fi
+else
+$2=yes
+fi
+fi
+$RM -r conftest*
+LDFLAGS="$save_LDFLAGS"
+])
+if test x"[$]$2" = xyes; then
+m4_if([$4], , :, [$4])
+else
+m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+i=0
+teststring="ABCD"
+case $build_os in
+msdosdjgpp*)
+# On DJGPP, this test can blow up pretty badly due to problems in libc
+# (any single argument exceeding 2000 bytes causes a buffer overrun
+# during glob expansion).  Even if it were fixed, the result of this
+# check would be larger than it should be.
+lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+;;
+gnu*)
+# Under GNU Hurd, this test is not required because there is
+# no limit to the length of command line arguments.
+# Libtool will interpret -1 as no limit whatsoever
+lt_cv_sys_max_cmd_len=-1;
+;;
+cygwin* | mingw* | cegcc*)
+# On Win9x/ME, this test blows up -- it succeeds, but takes
+# about 5 minutes as the teststring grows exponentially.
+# Worse, since 9x/ME are not pre-emptively multitasking,
+# you end up with a "frozen" computer, even though with patience
+# the test eventually succeeds (with a max line length of 256k).
+# Instead, let's just punt: use the minimum linelength reported by
+# all of the supported platforms: 8192 (on NT/2K/XP).
+lt_cv_sys_max_cmd_len=8192;
+;;
+beos*)
+# On BeOS, this test takes a really really long time.
+# So we just punt and use a minimum line length of 8192.
+lt_cv_sys_max_cmd_len=8192;
+;;
+amigaos*)
+# On AmigaOS with pdksh, this test takes hours, literally.
+# So we just punt and use a minimum line length of 8192.
+lt_cv_sys_max_cmd_len=8192;
+;;
+netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+# This has been around since 386BSD, at least.  Likely further.
+if test -x /sbin/sysctl; then
+lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+elif test -x /usr/sbin/sysctl; then
+lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+else
+lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+fi
+# And add a safety zone
+lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+;;
+interix*)
+# We know the value 262144 and hardcode it with a safety zone (like BSD)
+lt_cv_sys_max_cmd_len=196608
+;;
+osf*)
+# Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+# due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+# nice to cause kernel panics so lets avoid the loop below.
+# First set a reasonable default.
+lt_cv_sys_max_cmd_len=16384
+#
+if test -x /sbin/sysconfig; then
+case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+*1*) lt_cv_sys_max_cmd_len=-1 ;;
+esac
+fi
+;;
+sco3.2v5*)
+lt_cv_sys_max_cmd_len=102400
+;;
+sysv5* | sco5v6* | sysv4.2uw2*)
+kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+if test -n "$kargmax"; then
+lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
+else
+lt_cv_sys_max_cmd_len=32768
+fi
+;;
+*)
+lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+if test -n "$lt_cv_sys_max_cmd_len"; then
+lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+else
+# Make teststring a little bigger before we do anything with it.
+# a 1K string should be a reasonable start.
+for i in 1 2 3 4 5 6 7 8 ; do
+teststring=$teststring$teststring
+done
+SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+# If test is not a shell built-in, we'll probably end up computing a
+# maximum length that is only half of the actual maximum length, but
+# we can't tell.
+while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+do
+i=`expr $i + 1`
+teststring=$teststring$teststring
+done
+# Only check the string length outside the loop.
+lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+teststring=
+# Add a significant safety factor because C++ compilers can tack on
+# massive amounts of additional arguments before passing them to the
+# linker.  It appears as though 1/2 is a usable value.
+lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+fi
+;;
+esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+[What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+[$4]
+else
+lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+lt_status=$lt_dlunknown
+cat > conftest.$ac_ext <<_LT_EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+#include <stdio.h>
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+void fnord() { int i=42;}
+int main ()
+{
+void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+int status = $lt_dlunknown;
+if (self)
+{
+if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+/* dlclose (self); */
+}
+else
+puts (dlerror ());
+return status;
+}]
+_LT_EOF
+if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+lt_status=$?
+case x$lt_status in
+x$lt_dlno_uscore) $1 ;;
+x$lt_dlneed_uscore) $2 ;;
+x$lt_dlunknown|x*) $3 ;;
+esac
+else :
+# compilation failed
+$3
+fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+enable_dlopen=unknown
+enable_dlopen_self=unknown
+enable_dlopen_self_static=unknown
+else
+lt_cv_dlopen=no
+lt_cv_dlopen_libs=
+case $host_os in
+beos*)
+lt_cv_dlopen="load_add_on"
+lt_cv_dlopen_libs=
+lt_cv_dlopen_self=yes
+;;
+mingw* | pw32* | cegcc*)
+lt_cv_dlopen="LoadLibrary"
+lt_cv_dlopen_libs=
+;;
+cygwin*)
+lt_cv_dlopen="dlopen"
+lt_cv_dlopen_libs=
+;;
+darwin*)
+# if libdl is installed we need to link against it
+AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+lt_cv_dlopen="dyld"
+lt_cv_dlopen_libs=
+lt_cv_dlopen_self=yes
+])
+;;
+*)
+AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+[AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+	      ])
+	    ])
+	  ])
+	])
+])
+;;
+esac
+if test "x$lt_cv_dlopen" != xno; then
+enable_dlopen=yes
+else
+enable_dlopen=no
+fi
+case $lt_cv_dlopen in
+dlopen)
+save_CPPFLAGS="$CPPFLAGS"
+test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+save_LDFLAGS="$LDFLAGS"
+wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+save_LIBS="$LIBS"
+LIBS="$lt_cv_dlopen_libs $LIBS"
+AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+])
+if test "x$lt_cv_dlopen_self" = xyes; then
+wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+])
+fi
+CPPFLAGS="$save_CPPFLAGS"
+LDFLAGS="$save_LDFLAGS"
+LIBS="$save_LIBS"
+;;
+esac
+case $lt_cv_dlopen_self in
+yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+*) enable_dlopen_self=unknown ;;
+esac
+case $lt_cv_dlopen_self_static in
+yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+*) enable_dlopen_self_static=unknown ;;
+esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+[_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+$RM -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+mkdir out
+echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+lt_compiler_flag="-o out/conftest2.$ac_objext"
+# Insert the option either (1) after the last *FLAGS variable, or
+# (2) before a word containing "conftest.", or (3) at the end.
+# Note that $ac_compile itself does not contain backslashes and begins
+# with a dollar sign (not a hyphen), so the echo should work correctly.
+lt_compile=`echo "$ac_compile" | $SED \
+-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+-e 's:$: $lt_compiler_flag:'`
+(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+(eval "$lt_compile" 2>out/conftest.err)
+ac_status=$?
+cat out/conftest.err >&AS_MESSAGE_LOG_FD
+echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+if (exit $ac_status) && test -s out/conftest2.$ac_objext
+then
+# The compiler can only warn and ignore the option if not recognized
+# So say no if there are warnings
+$ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+$SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+fi
+fi
+chmod u+w . 2>&AS_MESSAGE_LOG_FD
+$RM conftest*
+# SGI C++ compiler will create directory out/ii_files/ for
+# template instantiation
+test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+$RM out/* && rmdir out
+cd ..
+$RM -r conftest
+$RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+# do not overwrite the value of need_locks provided by the user
+AC_MSG_CHECKING([if we can lock with hard links])
+hard_links=yes
+$RM conftest*
+ln conftest.a conftest.b 2>/dev/null && hard_links=no
+touch conftest.a
+ln conftest.a conftest.b 2>&5 || hard_links=no
+ln conftest.a conftest.b 2>/dev/null && hard_links=no
+AC_MSG_RESULT([$hard_links])
+if test "$hard_links" = no; then
+AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+need_locks=warn
+fi
+else
+need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+lt_cv_objdir=.libs
+else
+# MS-DOS does not allow filenames that begin with a dot.
+lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+[The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+[Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+# We can hardcode non-existent directories.
+if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+# If the only mechanism to avoid hardcoding is shlibpath_var, we
+# have to relink, otherwise we might link with an installed library
+# when we should be linking with a yet-to-be-installed one
+## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+# Linking always hardcodes the temporary library directory.
+_LT_TAGVAR(hardcode_action, $1)=relink
+else
+# We can link without hardcoding, and we can hardcode nonexisting dirs.
+_LT_TAGVAR(hardcode_action, $1)=immediate
+fi
+else
+# We cannot hardcode anything, or else we can only hardcode existing
+# directories.
+_LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+# Fast installation is not supported
+enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+test "$enable_shared" = no; then
+# Fast installation is not necessary
+enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+[How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+case $host_os in
+darwin*)
+if test -n "$STRIP" ; then
+striplib="$STRIP -x"
+old_striplib="$STRIP -S"
+AC_MSG_RESULT([yes])
+else
+AC_MSG_RESULT([no])
+fi
+;;
+*)
+AC_MSG_RESULT([no])
+;;
+esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+case $host_os in
+darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+*) lt_awk_arg="/^libraries:/" ;;
+esac
+lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+# if the path contains ";" then we assume it to be the separator
+# otherwise default to the standard path separator (i.e. ":") - it is
+# assumed that no part of a normal pathname contains ";" but that should
+# okay in the real world where ";" in dirpaths is itself problematic.
+lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+else
+lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+fi
+# Ok, now we have the path, separated by spaces, we can step through it
+# and add multilib dir if necessary.
+lt_tmp_lt_search_path_spec=
+lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+for lt_sys_path in $lt_search_path_spec; do
+if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+else
+test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+fi
+done
+lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+lt_foo="";
+lt_count=0;
+for (lt_i = NF; lt_i > 0; lt_i--) {
+if ($lt_i != "" && $lt_i != ".") {
+if ($lt_i == "..") {
+lt_count++;
+} else {
+if (lt_count == 0) {
+lt_foo="/" $lt_i lt_foo;
+} else {
+lt_count--;
+}
+}
+}
+}
+if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+case $host_os in
+aix3*)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+shlibpath_var=LIBPATH
+# AIX 3 has no versioning support, so we append a major version to the name.
+soname_spec='${libname}${release}${shared_ext}$major'
+;;
+aix[[4-9]]*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+hardcode_into_libs=yes
+if test "$host_cpu" = ia64; then
+# AIX 5 supports IA64
+library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+else
+# With GCC up to 2.95.x, collect2 would create an import file
+# for dependence libraries.  The import file would start with
+# the line `#! .'.  This would cause the generated library to
+# depend on `.', always an invalid library.  This was fixed in
+# development snapshots of GCC prior to 3.0.
+case $host_os in
+aix4 | aix4.[[01]] | aix4.[[01]].*)
+if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+else
+	can_build_shared=no
+fi
+;;
+esac
+# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+# soname into executable. Probably we can add versioning support to
+# collect2, so additional links can be useful in future.
+if test "$aix_use_runtimelinking" = yes; then
+# If using run time linking (on AIX 4.2 or later) use lib<name>.so
+# instead of lib<name>.a to let people know that these are not
+# typical AIX shared libraries.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+else
+# We preserve .a as extension for shared libraries through AIX4.2
+# and later when we are not doing run time linking.
+library_names_spec='${libname}${release}.a $libname.a'
+soname_spec='${libname}${release}${shared_ext}$major'
+fi
+shlibpath_var=LIBPATH
+fi
+;;
+amigaos*)
+case $host_cpu in
+powerpc)
+# Since July 2007 AmigaOS4 officially supports .so libraries.
+# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+;;
+m68k)
+library_names_spec='$libname.ixlibrary $libname.a'
+# Create ${libname}_ixlibrary.a entries in /sys/libs.
+finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+;;
+esac
+;;
+beos*)
+library_names_spec='${libname}${shared_ext}'
+dynamic_linker="$host_os ld.so"
+shlibpath_var=LIBRARY_PATH
+;;
+bsdi[[45]]*)
+version_type=linux
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+# the default ld.so.conf also contains /usr/contrib/lib and
+# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+# libtool to hard-code these into programs
+;;
+cygwin* | mingw* | pw32* | cegcc*)
+version_type=windows
+shrext_cmds=".dll"
+need_version=no
+need_lib_prefix=no
+case $GCC,$host_os in
+yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+library_names_spec='$libname.dll.a'
+# DLL is installed to $(libdir)/../bin by postinstall_cmds
+postinstall_cmds='base_file=`basename \${file}`~
+dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+dldir=$destdir/`dirname \$dlpath`~
+test -d \$dldir || mkdir -p \$dldir~
+$install_prog $dir/$dlname \$dldir/$dlname~
+chmod a+x \$dldir/$dlname~
+if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+fi'
+postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+dlpath=$dir/\$dldll~
+$RM \$dlpath'
+shlibpath_overrides_runpath=yes
+case $host_os in
+cygwin*)
+# Cygwin DLLs use 'cyg' prefix rather than 'lib'
+#soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+soname_spec='`echo ${libname} | sed -e 's/^lib//'`${shared_ext}'
+sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+;;
+mingw* | cegcc*)
+# MinGW DLLs use traditional 'lib' prefix
+#soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+soname_spec='`echo ${libname} | $SED -e 's/^lib//'`${shared_ext}'
+sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+# It is most probably a Windows format PATH printed by
+# mingw gcc, but we are running on Cygwin. Gcc prints its search
+# path with ; separators, and with drive letters. We can handle the
+# drive letters (cygwin fileutils understands them), so leave them,
+# especially as we might pass files found there to a mingw objdump,
+# which wouldn't understand a cygwinified path. Ahh.
+sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+else
+sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+fi
+;;
+pw32*)
+# pw32 DLLs use 'pw' prefix rather than 'lib'
+library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+;;
+esac
+;;
+*)
+library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+;;
+esac
+dynamic_linker='Win32 ld.exe'
+# FIXME: first we should search . and the directory the executable is in
+shlibpath_var=PATH
+;;
+darwin* | rhapsody*)
+dynamic_linker="$host_os dyld"
+version_type=darwin
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+soname_spec='${libname}${release}${major}$shared_ext'
+shlibpath_overrides_runpath=yes
+shlibpath_var=DYLD_LIBRARY_PATH
+shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+;;
+dgux*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+;;
+freebsd1*)
+dynamic_linker=no
+;;
+freebsd* | dragonfly*)
+# DragonFly does not have aout.  When/if they implement a new
+# versioning mechanism, adjust this.
+if test -x /usr/bin/objformat; then
+objformat=`/usr/bin/objformat`
+else
+case $host_os in
+freebsd[[123]]*) objformat=aout ;;
+*) objformat=elf ;;
+esac
+fi
+version_type=freebsd-$objformat
+case $version_type in
+freebsd-elf*)
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+need_version=no
+need_lib_prefix=no
+;;
+freebsd-*)
+library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+need_version=yes
+;;
+esac
+shlibpath_var=LD_LIBRARY_PATH
+case $host_os in
+freebsd2*)
+shlibpath_overrides_runpath=yes
+;;
+freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+;;
+freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+;;
+*) # from 4.6 on, and DragonFly
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+;;
+esac
+;;
+gnu*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+hardcode_into_libs=yes
+;;
+hpux9* | hpux10* | hpux11*)
+# Give a soname corresponding to the major version so that dld.sl refuses to
+# link against other versions.
+version_type=sunos
+need_lib_prefix=no
+need_version=no
+case $host_cpu in
+ia64*)
+shrext_cmds='.so'
+hardcode_into_libs=yes
+dynamic_linker="$host_os dld.so"
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+if test "X$HPUX_IA64_MODE" = X32; then
+sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+else
+sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+fi
+sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+;;
+hppa*64*)
+shrext_cmds='.sl'
+hardcode_into_libs=yes
+dynamic_linker="$host_os dld.sl"
+shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+;;
+*)
+shrext_cmds='.sl'
+dynamic_linker="$host_os dld.sl"
+shlibpath_var=SHLIB_PATH
+shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+;;
+esac
+# HP-UX runs *really* slowly unless shared libraries are mode 555.
+postinstall_cmds='chmod 555 $lib'
+;;
+interix[[3-9]]*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+;;
+irix5* | irix6* | nonstopux*)
+case $host_os in
+nonstopux*) version_type=nonstopux ;;
+*)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+esac
+need_lib_prefix=no
+need_version=no
+soname_spec='${libname}${release}${shared_ext}$major'
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+case $host_os in
+irix5* | nonstopux*)
+libsuff= shlibsuff=
+;;
+*)
+case $LD in # libtool.m4 will add one of these switches to LD
+*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+libsuff= shlibsuff= libmagic=32-bit;;
+*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+libsuff=32 shlibsuff=N32 libmagic=N32;;
+*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+libsuff=64 shlibsuff=64 libmagic=64-bit;;
+*) libsuff= shlibsuff= libmagic=never-match;;
+esac
+;;
+esac
+shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+shlibpath_overrides_runpath=no
+sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+hardcode_into_libs=yes
+;;
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+dynamic_linker=no
+;;
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+# Some binutils ld are patched to set DT_RUNPATH
+save_LDFLAGS=$LDFLAGS
+save_libdir=$libdir
+eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+[AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+[shlibpath_overrides_runpath=yes])])
+LDFLAGS=$save_LDFLAGS
+libdir=$save_libdir
+# This implies no fast_install, which is unacceptable.
+# Some rework will be needed to allow for fast_install
+# before this can be enabled.
+hardcode_into_libs=yes
+# Append ld.so.conf contents to the search path
+if test -f /etc/ld.so.conf; then
+lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+fi
+# We used to test for /lib/ld.so.1 and disable shared libraries on
+# powerpc, because MkLinux only supported shared libraries with the
+# GNU dynamic linker.  Since this was broken with cross compilers,
+# most powerpc-linux boxes support dynamic linking these days and
+# people can always --disable-shared, the test was removed, and we
+# assume the GNU/Linux dynamic linker is in use.
+dynamic_linker='GNU/Linux ld.so'
+;;
+netbsd*)
+version_type=sunos
+need_lib_prefix=no
+need_version=no
+if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+dynamic_linker='NetBSD (a.out) ld.so'
+else
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+dynamic_linker='NetBSD ld.elf_so'
+fi
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+;;
+newsos6)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+;;
+*nto* | *qnx*)
+version_type=qnx
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+dynamic_linker='ldqnx.so'
+;;
+openbsd*)
+version_type=sunos
+sys_lib_dlsearch_path_spec="/usr/lib"
+need_lib_prefix=no
+# Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+case $host_os in
+openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+*)				need_version=no  ;;
+esac
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+case $host_os in
+openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+*)
+	shlibpath_overrides_runpath=yes
+	;;
+esac
+else
+shlibpath_overrides_runpath=yes
+fi
+;;
+os2*)
+libname_spec='$name'
+shrext_cmds=".dll"
+need_lib_prefix=no
+library_names_spec='$libname${shared_ext} $libname.a'
+dynamic_linker='OS/2 ld.exe'
+shlibpath_var=LIBPATH
+;;
+osf3* | osf4* | osf5*)
+version_type=osf
+need_lib_prefix=no
+need_version=no
+soname_spec='${libname}${release}${shared_ext}$major'
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+;;
+rdos*)
+dynamic_linker=no
+;;
+solaris*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+# ldd complains unless libraries are executable
+postinstall_cmds='chmod +x $lib'
+;;
+sunos4*)
+version_type=sunos
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+if test "$with_gnu_ld" = yes; then
+need_lib_prefix=no
+fi
+need_version=yes
+;;
+sysv4 | sysv4.3*)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+case $host_vendor in
+sni)
+shlibpath_overrides_runpath=no
+need_lib_prefix=no
+runpath_var=LD_RUN_PATH
+;;
+siemens)
+need_lib_prefix=no
+;;
+motorola)
+need_lib_prefix=no
+need_version=no
+shlibpath_overrides_runpath=no
+sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+;;
+esac
+;;
+sysv4*MP*)
+if test -d /usr/nec ;then
+version_type=linux
+library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+soname_spec='$libname${shared_ext}.$major'
+shlibpath_var=LD_LIBRARY_PATH
+fi
+;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+version_type=freebsd-elf
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+if test "$with_gnu_ld" = yes; then
+sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+else
+sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+case $host_os in
+sco3.2v5*)
+sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+esac
+fi
+sys_lib_dlsearch_path_spec='/usr/lib'
+;;
+tpf*)
+# TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+;;
+uts4*)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+;;
+*)
+dynamic_linker=no
+;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+_LT_DECL([], [variables_saved_for_relink], [1],
+[Variables whose values should be saved in libtool wrapper scripts and
+restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+[Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+[Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+[[List of archive names.  First name is the real one, the rest are links.
+The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+[[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+[Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+[Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+[Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+[[As "finish_cmds", except a single script fragment to be evaled but
+not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+[Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+[Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+[Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+;;
+*)
+lt_save_MAGIC_CMD="$MAGIC_CMD"
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+ac_dummy="m4_if([$2], , $PATH, [$2])"
+for ac_dir in $ac_dummy; do
+IFS="$lt_save_ifs"
+test -z "$ac_dir" && ac_dir=.
+if test -f $ac_dir/$1; then
+lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+_LT_EOF
+	  fi ;;
+	esac
+fi
+break
+fi
+done
+IFS="$lt_save_ifs"
+MAGIC_CMD="$lt_save_MAGIC_CMD"
+;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+AC_MSG_RESULT($MAGIC_CMD)
+else
+AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+if test -n "$ac_tool_prefix"; then
+_LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+else
+MAGIC_CMD=:
+fi
+fi
+])# _LT_PATH_MAGIC
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+AC_ARG_WITH([gnu-ld],
+[AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+[test "$withval" = no || with_gnu_ld=yes],
+[with_gnu_ld=no])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+# Check if gcc -print-prog-name=ld gives a path.
+AC_MSG_CHECKING([for ld used by $CC])
+case $host in
+*-*-mingw*)
+# gcc leaves a trailing carriage return which upsets mingw
+ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+*)
+ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+esac
+case $ac_prog in
+# Accept absolute paths.
+[[\\/]]* | ?:[[\\/]]*)
+re_direlt='/[[^/]][[^/]]*/\.\./'
+# Canonicalize the pathname of ld
+ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+done
+test -z "$LD" && LD="$ac_prog"
+;;
+"")
+# If it fails, then pretend we aren't using GCC.
+ac_prog=ld
+;;
+*)
+# If it is relative, then search for the first ld in PATH.
+with_gnu_ld=unknown
+;;
+esac
+elif test "$with_gnu_ld" = yes; then
+AC_MSG_CHECKING([for GNU ld])
+else
+AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+for ac_dir in $PATH; do
+IFS="$lt_save_ifs"
+test -z "$ac_dir" && ac_dir=.
+if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+lt_cv_path_LD="$ac_dir/$ac_prog"
+# Check to see if the program is GNU ld.  I'd rather use --version,
+# but apparently some variants of GNU ld only accept -v.
+# Break only if it was the GNU/non-GNU ld that we prefer.
+case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+*)
+	test "$with_gnu_ld" != yes && break
+	;;
+esac
+fi
+done
+IFS="$lt_save_ifs"
+else
+lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+AC_MSG_RESULT($LD)
+else
+AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+lt_cv_prog_gnu_ld=yes
+;;
+*)
+lt_cv_prog_gnu_ld=no
+;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+darwin*)
+if test "$GCC" = yes; then
+reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+else
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+fi
+;;
+esac
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+case $host_os in
+aix[[4-9]]*)
+lt_cv_deplibs_check_method=pass_all
+;;
+beos*)
+lt_cv_deplibs_check_method=pass_all
+;;
+bsdi[[45]]*)
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+lt_cv_file_magic_cmd='/usr/bin/file -L'
+lt_cv_file_magic_test_file=/shlib/libc.so
+;;
+cygwin*)
+# func_win32_libid is a shell function defined in ltmain.sh
+lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+lt_cv_deplibs_check_method=pass_all
+lt_cv_file_magic_cmd='func_win32_libid'
+;;
+mingw* | pw32*)
+# Base MSYS/MinGW do not provide the 'file' command needed by
+# func_win32_libid shell function, so use a weaker test based on 'objdump',
+# unless we find 'file', for example because we are cross-compiling.
+if ( file / ) >/dev/null 2>&1; then
+lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+lt_cv_file_magic_cmd='func_win32_libid'
+else
+lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+lt_cv_file_magic_cmd='$OBJDUMP -f'
+fi
+lt_cv_deplibs_check_method=pass_all
+;;
+cegcc)
+# use the weaker test based on 'objdump'. See mingw*.
+lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+lt_cv_file_magic_cmd='$OBJDUMP -f'
+;;
+darwin* | rhapsody*)
+lt_cv_deplibs_check_method=pass_all
+;;
+freebsd* | dragonfly*)
+if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+case $host_cpu in
+i*86 )
+# Not sure whether the presence of OpenBSD here was a mistake.
+# Let's accept both of them until this is cleared up.
+lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+lt_cv_file_magic_cmd=/usr/bin/file
+lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+;;
+esac
+else
+lt_cv_deplibs_check_method=pass_all
+fi
+;;
+gnu*)
+lt_cv_deplibs_check_method=pass_all
+;;
+hpux10.20* | hpux11*)
+lt_cv_file_magic_cmd=/usr/bin/file
+case $host_cpu in
+ia64*)
+lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+;;
+hppa*64*)
+[lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+;;
+*)
+lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+lt_cv_file_magic_test_file=/usr/lib/libc.sl
+;;
+esac
+;;
+interix[[3-9]]*)
+# PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+;;
+irix5* | irix6* | nonstopux*)
+case $LD in
+*-32|*"-32 ") libmagic=32-bit;;
+*-n32|*"-n32 ") libmagic=N32;;
+*-64|*"-64 ") libmagic=64-bit;;
+*) libmagic=never-match;;
+esac
+lt_cv_deplibs_check_method=pass_all
+;;
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+lt_cv_deplibs_check_method=pass_all
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+else
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+fi
+;;
+newos6*)
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+lt_cv_file_magic_cmd=/usr/bin/file
+lt_cv_file_magic_test_file=/usr/lib/libnls.so
+;;
+*nto* | *qnx*)
+lt_cv_deplibs_check_method=pass_all
+;;
+openbsd*)
+if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+else
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+fi
+;;
+osf3* | osf4* | osf5*)
+lt_cv_deplibs_check_method=pass_all
+;;
+rdos*)
+lt_cv_deplibs_check_method=pass_all
+;;
+solaris*)
+lt_cv_deplibs_check_method=pass_all
+;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+lt_cv_deplibs_check_method=pass_all
+;;
+sysv4 | sysv4.3*)
+case $host_vendor in
+motorola)
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+;;
+ncr)
+lt_cv_deplibs_check_method=pass_all
+;;
+sequent)
+lt_cv_file_magic_cmd='/bin/file'
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+;;
+sni)
+lt_cv_file_magic_cmd='/bin/file'
+lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+lt_cv_file_magic_test_file=/lib/libc.so
+;;
+siemens)
+lt_cv_deplibs_check_method=pass_all
+;;
+pc)
+lt_cv_deplibs_check_method=pass_all
+;;
+esac
+;;
+tpf*)
+lt_cv_deplibs_check_method=pass_all
+;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+_LT_DECL([], [deplibs_check_method], [1],
+[Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+[Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+# Let the user override the test.
+lt_cv_path_NM="$NM"
+else
+lt_nm_to_check="${ac_tool_prefix}nm"
+if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+lt_nm_to_check="$lt_nm_to_check nm"
+fi
+for lt_tmp_nm in $lt_nm_to_check; do
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+IFS="$lt_save_ifs"
+test -z "$ac_dir" && ac_dir=.
+tmp_nm="$ac_dir/$lt_tmp_nm"
+if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+fi
+done
+IFS="$lt_save_ifs"
+done
+: ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+NM="$lt_cv_path_NM"
+else
+# Didn't find any BSD compatible name lister, look for dumpbin.
+AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+AC_SUBST([DUMPBIN])
+if test "$DUMPBIN" != ":"; then
+NM="$DUMPBIN"
+fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+[lt_cv_nm_interface="BSD nm"
+echo "int some_variable = 0;" > conftest.$ac_ext
+(eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+(eval "$ac_compile" 2>conftest.err)
+cat conftest.err >&AS_MESSAGE_LOG_FD
+(eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+(eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+cat conftest.err >&AS_MESSAGE_LOG_FD
+(eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+cat conftest.out >&AS_MESSAGE_LOG_FD
+if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+lt_cv_nm_interface="MS dumpbin"
+fi
+rm -f conftest*])
+])# LT_PATH_NM
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+# These system don't have libm, or don't need it
+;;
+*-ncr-sysv4.3*)
+AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+;;
+*)
+AC_CHECK_LIB(m, cos, LIBM="-lm")
+;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+if test "$GCC" = yes; then
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+_LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+lt_cv_prog_compiler_rtti_exceptions,
+[-fno-rtti -fno-exceptions], [],
+[_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+# Define system-specific variables.
+case $host_os in
+aix*)
+symcode='[[BCDT]]'
+;;
+cygwin* | mingw* | pw32* | cegcc*)
+symcode='[[ABCDGISTW]]'
+;;
+hpux*)
+if test "$host_cpu" = ia64; then
+symcode='[[ABCDEGRST]]'
+fi
+;;
+irix* | nonstopux*)
+symcode='[[BCDEGRST]]'
+;;
+osf*)
+symcode='[[BCDEGQRST]]'
+;;
+solaris*)
+symcode='[[BDRT]]'
+;;
+sco3.2v5*)
+symcode='[[DT]]'
+;;
+sysv4.2uw2*)
+symcode='[[DT]]'
+;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+symcode='[[ABDT]]'
+;;
+sysv4)
+symcode='[[DFNSTU]]'
+;;
+esac
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+symcode='[[ABCDGIRSTW]]' ;;
+esac
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+;;
+esac
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+# Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+symxfrm="\\1 $ac_symprfx\\2 \\2"
+# Write the raw and C identifiers.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+# Fake it for dumpbin and say T for any non-static function
+# and D for any global variable.
+# Also find C++ and __fastcall symbols from MSVC++,
+# which start with @ or ?.
+lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+else
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+fi
+# Check to see that the pipe works correctly.
+pipe_works=no
+rm -f conftest*
+cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+if AC_TRY_EVAL(ac_compile); then
+# Now try to grab the symbols.
+nlist=conftest.nm
+if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+# Try sorting and uniquifying the output.
+if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+else
+	rm -f "$nlist"T
+fi
+# Make sure that we snagged all the symbols we need.
+if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+	  cat <<_LT_EOF >> conftest.$ac_ext
+/* The mapping between symbol names and symbols.  */
+const struct {
+const char *name;
+void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+{ "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+{0, (void *) 0}
+};
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+fi
+else
+echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+fi
+else
+echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+cat conftest.$ac_ext >&5
+fi
+rm -rf conftest* conftst*
+# Do not use the global_symbol_pipe unless it works.
+if test "$pipe_works" = yes; then
+break
+else
+lt_cv_sys_global_symbol_pipe=
+fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+AC_MSG_RESULT(failed)
+else
+AC_MSG_RESULT(ok)
+fi
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+[Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+[lt_cv_sys_global_symbol_to_c_name_address], [1],
+[Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+[Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+m4_if([$1], [CXX], [
+# C++ specific cases for pic, static, wl, etc.
+if test "$GXX" = yes; then
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+case $host_os in
+aix*)
+# All AIX code is PIC.
+if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+fi
+;;
+amigaos*)
+case $host_cpu in
+powerpc)
+# see comment about AmigaOS4 .so support
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+;;
+m68k)
+# FIXME: we need at least 68020 code to build shared libraries, but
+# adding the `-m68020' flag to GCC prevents building anything better,
+# like `-m68040'.
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+;;
+esac
+;;
+beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+# PIC is the default for these OSes.
+;;
+mingw* | cygwin* | os2* | pw32* | cegcc*)
+# This hack is so that the source file can tell whether it is being
+# built for inclusion in a dll (and should export symbols for example).
+# Although the cygwin gcc ignores -fPIC, still need this for old-style
+# (--disable-auto-import) libraries
+m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+;;
+darwin* | rhapsody*)
+# PIC is the default on this platform
+# Common symbols not allowed in MH_DYLIB files
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+;;
+*djgpp*)
+# DJGPP does not support shared libraries at all
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+;;
+interix[[3-9]]*)
+# Interix 3.x gcc -fpic/-fPIC options generate broken code.
+# Instead, we relocate shared libraries at runtime.
+;;
+sysv4*MP*)
+if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+fi
+;;
+hpux*)
+# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+# PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+# sets the default TLS model and affects inlining.
+case $host_cpu in
+hppa*64*)
+	;;
+*)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+esac
+;;
+*qnx* | *nto*)
+# QNX uses GNU C++, but need to define -shared option too, otherwise
+# it will coredump.
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+;;
+*)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+;;
+esac
+else
+case $host_os in
+aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+lynxos*)
+	;;
+m88k*)
+	;;
+mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+netbsd*)
+	;;
+*qnx* | *nto*)
+# QNX uses GNU C++, but need to define -shared option too, otherwise
+# it will coredump.
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+;;
+osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+psos*)
+	;;
+solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+vxworks*)
+	;;
+*)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+esac
+fi
+],
+[
+if test "$GCC" = yes; then
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+case $host_os in
+aix*)
+# All AIX code is PIC.
+if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+fi
+;;
+amigaos*)
+case $host_cpu in
+powerpc)
+# see comment about AmigaOS4 .so support
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+;;
+m68k)
+# FIXME: we need at least 68020 code to build shared libraries, but
+# adding the `-m68020' flag to GCC prevents building anything better,
+# like `-m68040'.
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+;;
+esac
+;;
+beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+# PIC is the default for these OSes.
+;;
+mingw* | cygwin* | pw32* | os2* | cegcc*)
+# This hack is so that the source file can tell whether it is being
+# built for inclusion in a dll (and should export symbols for example).
+# Although the cygwin gcc ignores -fPIC, still need this for old-style
+# (--disable-auto-import) libraries
+m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+;;
+darwin* | rhapsody*)
+# PIC is the default on this platform
+# Common symbols not allowed in MH_DYLIB files
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+;;
+hpux*)
+# PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+# PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+# sets the default TLS model and affects inlining.
+case $host_cpu in
+hppa*64*)
+	# +Z the default
+	;;
+*)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+esac
+;;
+interix[[3-9]]*)
+# Interix 3.x gcc -fpic/-fPIC options generate broken code.
+# Instead, we relocate shared libraries at runtime.
+;;
+msdosdjgpp*)
+# Just because we use GCC doesn't mean we suddenly get shared libraries
+# on systems that don't support them.
+_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+enable_shared=no
+;;
+*nto* | *qnx*)
+# QNX uses GNU C++, but need to define -shared option too, otherwise
+# it will coredump.
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+;;
+sysv4*MP*)
+if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+fi
+;;
+*)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+;;
+esac
+else
+# PORTME Check for flag to pass linker flags through the system compiler.
+case $host_os in
+aix*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+fi
+;;
+mingw* | cygwin* | pw32* | os2* | cegcc*)
+# This hack is so that the source file can tell whether it is being
+# built for inclusion in a dll (and should export symbols for example).
+m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+;;
+hpux9* | hpux10* | hpux11*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+# not for PA HP-UX.
+case $host_cpu in
+hppa*64*|ia64*)
+	# +Z the default
+	;;
+*)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+esac
+# Is there a better lt_prog_compiler_static that works with the bundled CC?
+_LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+;;
+irix5* | irix6* | nonstopux*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# PIC (with -KPIC) is the default.
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+linux* | k*bsd*-gnu)
+case $cc_basename in
+# old Intel for x86_64 which still supported -KPIC.
+ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+;;
+# icc used to be incompatible with GCC.
+# ICC 10 doesn't accept -KPIC any more.
+icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+;;
+# Lahey Fortran 8.1.
+lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+pgcc* | pgf77* | pgf90* | pgf95*)
+# Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+ccc*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# All Alpha code is PIC.
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+*)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
+esac
+;;
+newsos6)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+*nto* | *qnx*)
+# QNX uses GNU C++, but need to define -shared option too, otherwise
+# it will coredump.
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+;;
+osf3* | osf4* | osf5*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# All OSF/1 code is PIC.
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+rdos*)
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+solaris*)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+case $cc_basename in
+f77* | f90* | f95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+esac
+;;
+sunos4*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+sysv4 | sysv4.2uw2* | sysv4.3*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+sysv4*MP*)
+if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+fi
+;;
+sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+unicos*)
+_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+;;
+uts4*)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+*)
+_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+;;
+esac
+fi
+])
+case $host_os in
+# For platforms which do not support PIC, -DPIC is meaningless:
+*djgpp*)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+;;
+*)
+_LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+_LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+[_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+[$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+[case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+"" | " "*) ;;
+*) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+esac],
+[_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+_LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+$lt_tmp_static_flag,
+[],
+[_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+case $host_os in
+aix[[4-9]]*)
+# If we're using GNU nm, then we don't want the "-C" option.
+# -C means demangle to AIX nm, but means don't demangle with GNU nm
+if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+else
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+fi
+;;
+pw32*)
+_LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+;;
+cygwin* | mingw* | cegcc*)
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+;;
+*)
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+;;
+esac
+_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
+runpath_var=
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_cmds, $1)=
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(old_archive_from_new_cmds, $1)=
+_LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+_LT_TAGVAR(thread_safe_flag_spec, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+_LT_TAGVAR(include_expsyms, $1)=
+# exclude_expsyms can be an extended regexp of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+# Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+extract_expsyms_cmds=
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+# FIXME: the MSVC++ port hasn't been tested in a loooong time
+# When not using gcc, we currently assume that we are using
+# Microsoft Visual C++.
+if test "$GCC" != yes; then
+with_gnu_ld=no
+fi
+;;
+interix*)
+# we just hope/assume this is gcc and not c89 (= MSVC++)
+with_gnu_ld=yes
+;;
+openbsd*)
+with_gnu_ld=no
+;;
+esac
+_LT_TAGVAR(ld_shlibs, $1)=yes
+if test "$with_gnu_ld" = yes; then
+# If archive_cmds runs LD, not CC, wlarc should be empty
+wlarc='${wl}'
+# Set some defaults for GNU ld with shared library support. These
+# are reset later if shared libraries are not supported. Putting them
+# here allows them to be overridden if necessary.
+runpath_var=LD_RUN_PATH
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+# ancient GNU ld didn't support --whole-archive et. al.
+if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+_LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+else
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+fi
+supports_anon_versioning=no
+case `$LD -v 2>&1` in
+*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+*\ 2.11.*) ;; # other 2.11 versions
+*) supports_anon_versioning=yes ;;
+esac
+# See if GNU ld supports shared libraries.
+case $host_os in
+aix[[3-9]]*)
+# On AIX/PPC, the GNU linker is very broken
+if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+_LT_EOF
+fi
+;;
+amigaos*)
+case $host_cpu in
+powerpc)
+# see comment about AmigaOS4 .so support
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+_LT_TAGVAR(archive_expsym_cmds, $1)=''
+;;
+m68k)
+_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+;;
+esac
+;;
+beos*)
+if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+cygwin* | mingw* | pw32* | cegcc*)
+# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+# as there is no search path for DLLs.
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+interix[[3-9]]*)
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+# Instead, shared libraries are loaded at an image base (0x10000000 by
+# default) and relocated if they conflict, which is a slow very memory
+# consuming and fragmenting process.  To avoid this, we pick a random,
+# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+;;
+gnu* | linux* | tpf* | k*bsd*-gnu)
+tmp_diet=no
+if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+fi
+if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+then
+	tmp_addflag=
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+if test "x$supports_anon_versioning" = xyes; then
+_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+fi
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+else
+_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+fi
+;;
+solaris*)
+if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+_LT_EOF
+elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+case `$LD -v 2>&1` in
+*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+esac
+;;
+sunos4*)
+_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+wlarc=
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+*)
+if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+esac
+if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+runpath_var=
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+fi
+else
+# PORTME fill in a description of your system's linker (not GNU ld)
+case $host_os in
+aix3*)
+_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_TAGVAR(always_export_symbols, $1)=yes
+_LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+# Note: this linker hardcodes the directories in LIBPATH if there
+# are no directories specified by -L.
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+fi
+;;
+aix[[4-9]]*)
+if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+fi
+# When large executables or shared objects are built, AIX ld can
+# have problems creating the table of contents.  If linking a library
+# or program results in "error TOC overflow" add -mminimal-toc to
+# CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+_LT_TAGVAR(archive_cmds, $1)=''
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+_LT_TAGVAR(link_all_deplibs, $1)=yes
+_LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+fi
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+# It seems that -bexpall does not export symbols beginning with
+# underscore (_), so it is better to generate a list of symbols to export.
+_LT_TAGVAR(always_export_symbols, $1)=yes
+if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+# Determine the default libpath from the value encoded in an
+# empty executable.
+_LT_SYS_MODULE_PATH_AIX
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+fi
+;;
+amigaos*)
+case $host_cpu in
+powerpc)
+# see comment about AmigaOS4 .so support
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+_LT_TAGVAR(archive_expsym_cmds, $1)=''
+;;
+m68k)
+_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+;;
+esac
+;;
+bsdi[[45]]*)
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+;;
+cygwin* | mingw* | pw32* | cegcc*)
+# When not using gcc, we currently assume that we are using
+# Microsoft Visual C++.
+# hardcode_libdir_flag_spec is actually meaningless, as there is
+# no search path for DLLs.
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+# Tell ltmain to make .lib files, not .a files.
+libext=lib
+# Tell ltmain to make .dll files, not .so files.
+shrext_cmds=".dll"
+# FIXME: Setting linknames here is a bad hack.
+_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+# The linker will automatically build a .lib file if we build a DLL.
+_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+# FIXME: Should let the user specify the lib program.
+_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+_LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+;;
+darwin* | rhapsody*)
+_LT_DARWIN_LINKER_FEATURES($1)
+;;
+dgux*)
+_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+freebsd1*)
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+# support.  Future versions do this automatically, but an explicit c++rt0.o
+# does not break anything, and helps significantly (at the cost of a little
+# extra space).
+freebsd2.2*)
+_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+# Unfortunately, older versions of FreeBSD 2 do not have this feature.
+freebsd2*)
+_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+freebsd* | dragonfly*)
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+hpux9*)
+if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+fi
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_TAGVAR(hardcode_direct, $1)=yes
+# hardcode_minus_L: Not really in the search PATH,
+# but as the default location of the library.
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+;;
+hpux10*)
+if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+fi
+;;
+hpux11*)
+if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+fi
+if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+fi
+;;
+irix5* | irix6* | nonstopux*)
+if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+AC_LINK_IFELSE(int foo(void) {},
+_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+)
+LDFLAGS="$save_LDFLAGS"
+else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+fi
+_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_TAGVAR(inherit_rpath, $1)=yes
+_LT_TAGVAR(link_all_deplibs, $1)=yes
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+fi
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+newsos6)
+_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+*nto* | *qnx*)
+;;
+openbsd*)
+if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+os2*)
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+_LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+;;
+osf3*)
+if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+fi
+_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+;;
+osf4* | osf5*)	# as osf3* with the addition of -msym flag
+if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+fi
+_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+;;
+solaris*)
+_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+fi
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+case $host_os in
+solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+*)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+esac
+_LT_TAGVAR(link_all_deplibs, $1)=yes
+;;
+sunos4*)
+if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+fi
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+sysv4)
+case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+esac
+runpath_var='LD_RUN_PATH'
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+sysv4.3*)
+_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+;;
+sysv4*MP*)
+if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+fi
+;;
+sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+runpath_var='LD_RUN_PATH'
+if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+fi
+;;
+sysv5* | sco3.2v5* | sco5v6*)
+# Note: We can NOT use -z defs as we might desire, because we do not
+# link with -lc, and that would cause any symbols used from libc to
+# always be unresolved, which means just about no library would
+# ever link correctly.  If we're not using GNU ld we use -z text
+# though, which does catch some bad symbols but isn't as heavy-handed
+# as -z defs.
+_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+_LT_TAGVAR(link_all_deplibs, $1)=yes
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+runpath_var='LD_RUN_PATH'
+if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+fi
+;;
+uts4*)
+_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+*)
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+esac
+if test x$host_vendor = xsni; then
+case $host in
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+esac
+fi
+fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+[The commands to extract the exported symbol list from a shared archive])
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+# Assume -lc should be added
+_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+case $_LT_TAGVAR(archive_cmds, $1) in
+*'~'*)
+# FIXME: we may have to deal with multi-command sequences.
+;;
+'$CC '*)
+# Test whether the compiler implicitly links with -lc since on some
+# systems, -lgcc has to come before -lc. If gcc already passes -lc
+# to ld, don't add -lc before -lgcc.
+AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+$RM conftest*
+echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+soname=conftest
+lib=conftest
+libobjs=conftest.$ac_objext
+deplibs=
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+compiler_flags=-v
+linker_flags=-v
+verstring=
+output_objdir=.
+libname=conftest
+lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+_LT_TAGVAR(allow_undefined_flag, $1)=
+if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+then
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+else
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+fi
+_LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+else
+cat conftest.err 1>&5
+fi
+$RM conftest*
+AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+;;
+esac
+fi
+;;
+esac
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+[Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+[enable_shared_with_static_runtimes], [0],
+[Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+[Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+[Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+[Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+[Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+[Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+[Commands used to build a loadable module if different from building
+a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+[Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+[Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+[Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+[Flag to hardcode $libdir into a binary during linking.
+This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+[[If ld is used when linking, flag to hardcode $libdir into a binary
+during linking.  This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+[Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+[Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+[Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+DIR into the resulting binary and the resulting library dependency is
+"absolute", i.e impossible to change by setting ${shlibpath_var} if the
+library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+[Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+[Set to "yes" if building a shared library automatically hardcodes DIR
+into the library and all subsequent libraries and executables linked
+against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+[Set to yes if linker adds runtime paths of dependent libraries
+to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+[Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+[Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+[Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+[The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+[Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+[Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+[Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+[Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+# Source file extension for C test sources.
+ac_ext=c
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+_LT_COMPILER_NO_RTTI($1)
+_LT_COMPILER_PIC($1)
+_LT_COMPILER_C_O($1)
+_LT_COMPILER_FILE_LOCKS($1)
+_LT_LINKER_SHLIBS($1)
+_LT_SYS_DYNAMIC_LINKER($1)
+_LT_LINKER_HARDCODE_LIBPATH($1)
+LT_SYS_DLOPEN_SELF
+_LT_CMD_STRIPLIB
+# Report which library types will actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+test "$enable_shared" = yes && enable_static=no
+if test -n "$RANLIB"; then
+archive_cmds="$archive_cmds~\$RANLIB \$lib"
+postinstall_cmds='$RANLIB $lib'
+fi
+;;
+aix[[4-9]]*)
+if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+test "$enable_shared" = yes && enable_static=no
+fi
+;;
+esac
+AC_MSG_RESULT([$enable_shared])
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+_LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+(test "X$CXX" != "Xg++"))) ; then
+AC_PROG_CXXCPP
+else
+_lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# Source file extension for C++ test sources.
+ac_ext=cpp
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+$as_unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+$as_unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+if test -n "$compiler"; then
+# We don't want -fno-exception when compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+if test "$GXX" = yes; then
+# Set up default GNU C++ configuration
+LT_PATH_LD
+# Check if GNU C++ uses GNU ld as the underlying linker, since the
+# archiving commands below assume that GNU ld is being used.
+if test "$with_gnu_ld" = yes; then
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+# If archive_cmds runs LD, not CC, wlarc should be empty
+# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+#     investigate it a little bit more. (MM)
+wlarc='${wl}'
+# ancient GNU ld didn't support --whole-archive et. al.
+if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+_LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+else
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+fi
+else
+with_gnu_ld=no
+wlarc=
+# A generic and very simple default shared library creation
+# command for GNU C++ for the case where it uses the native
+# linker, instead of GNU ld.  If possible, this setting should
+# overridden to take advantage of the native linker features on
+# the platform it is being used on.
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+fi
+# Commands to make compiler produce verbose output that lists
+# what "hidden" libraries, object files and flags are used when
+# linking a shared library.
+output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+else
+GXX=no
+with_gnu_ld=no
+wlarc=
+fi
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+aix3*)
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+aix[[4-9]]*)
+if test "$host_cpu" = ia64; then
+# On IA64, the linker does run time linking by default, so we don't
+# have to do anything special.
+aix_use_runtimelinking=no
+exp_sym_flag='-Bexport'
+no_entry_flag=""
+else
+aix_use_runtimelinking=no
+# Test if we are trying to use run time linking or normal
+# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+# need to do runtime linking.
+case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+esac
+exp_sym_flag='-bexport'
+no_entry_flag='-bnoentry'
+fi
+# When large executables or shared objects are built, AIX ld can
+# have problems creating the table of contents.  If linking a library
+# or program results in "error TOC overflow" add -mminimal-toc to
+# CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+_LT_TAGVAR(archive_cmds, $1)=''
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+_LT_TAGVAR(link_all_deplibs, $1)=yes
+_LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+if test "$GXX" = yes; then
+case $host_os in aix4.[[012]]|aix4.[[012]].*)
+# We only want to do this on AIX 4.2 and lower, the check
+# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+esac
+shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+else
+# not using gcc
+if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+fi
+fi
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+# It seems that -bexpall does not export symbols beginning with
+# underscore (_), so it is better to generate a list of symbols to
+	# export.
+_LT_TAGVAR(always_export_symbols, $1)=yes
+if test "$aix_use_runtimelinking" = yes; then
+# Warning - without using the other runtime loading flags (-brtl),
+# -berok will link without error, but may produce a broken library.
+_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+# Determine the default libpath from the value encoded in an empty
+# executable.
+_LT_SYS_MODULE_PATH_AIX
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+else
+if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+fi
+fi
+;;
+beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+chorus*)
+case $cc_basename in
+*)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+esac
+;;
+cygwin* | mingw* | pw32* | cegcc*)
+# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+# as there is no search path for DLLs.
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+_LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+# If the export-symbols file already is a .def file (1st line
+# is EXPORTS), use it as is; otherwise, prepend...
+_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+fi~
+$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+else
+_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+darwin* | rhapsody*)
+_LT_DARWIN_LINKER_FEATURES($1)
+	;;
+dgux*)
+case $cc_basename in
+ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+esac
+;;
+freebsd[[12]]*)
+# C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+freebsd-elf*)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+;;
+freebsd* | dragonfly*)
+# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+# conventions
+_LT_TAGVAR(ld_shlibs, $1)=yes
+;;
+gnu*)
+;;
+hpux9*)
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+case $cc_basename in
+CC*)
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+aCC*)
+_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+# Commands to make compiler produce verbose output that lists
+# what "hidden" libraries, object files and flags are used when
+# linking a shared library.
+#
+# There doesn't appear to be a way to prevent this compiler from
+# explicitly linking system object files so we need to strip them
+# from the output so that they don't get included in the library
+# dependencies.
+output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+;;
+*)
+if test "$GXX" = yes; then
+_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+else
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+esac
+;;
+hpux10*|hpux11*)
+if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+case $host_cpu in
+hppa*64*|ia64*)
+;;
+*)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+;;
+esac
+fi
+case $host_cpu in
+hppa*64*|ia64*)
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+*)
+_LT_TAGVAR(hardcode_direct, $1)=yes
+_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+;;
+esac
+case $cc_basename in
+CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+*)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+esac
+;;
+interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+irix5* | irix6*)
+case $cc_basename in
+CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+*)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+esac
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_TAGVAR(inherit_rpath, $1)=yes
+;;
+linux* | k*bsd*-gnu)
+case $cc_basename in
+KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+pgCC* | pgcpp*)
+# Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+lynxos*)
+# FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+m88k*)
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+mvs*)
+case $cc_basename in
+cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+netbsd*)
+if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+*nto* | *qnx*)
+_LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+openbsd2*)
+# C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+osf3* | osf4* | osf5*)
+case $cc_basename in
+KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+esac
+;;
+psos*)
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+sunos4*)
+case $cc_basename in
+CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+esac
+;;
+solaris*)
+case $cc_basename in
+CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    output_verbose_link_cmd='echo'
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+*)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+esac
+;;
+sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+runpath_var='LD_RUN_PATH'
+case $cc_basename in
+CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+esac
+;;
+sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+	case $cc_basename in
+CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+;;
+tandem*)
+case $cc_basename in
+NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+esac
+;;
+vxworks*)
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+*)
+# FIXME: insert proper C++ library support
+_LT_TAGVAR(ld_shlibs, $1)=no
+;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+_LT_TAGVAR(GCC, $1)="$GXX"
+_LT_TAGVAR(LD, $1)="$LD"
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+_LT_SYS_HIDDEN_LIBDEPS($1)
+_LT_COMPILER_PIC($1)
+_LT_COMPILER_C_O($1)
+_LT_COMPILER_FILE_LOCKS($1)
+_LT_LINKER_SHLIBS($1)
+_LT_SYS_DYNAMIC_LINKER($1)
+_LT_LINKER_HARDCODE_LIBPATH($1)
+_LT_CONFIG($1)
+fi # test -n "$compiler"
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+Foo (void) { a = 0; }
+private:
+int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+subroutine foo
+implicit none
+integer*4 a
+a=0
+return
+end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+subroutine foo
+implicit none
+integer a
+a=0
+return
+end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+private int a;
+public void bar (void) {
+a = 0;
+}
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+# Sentinel used to keep track of whether or not we are before
+# the conftest object file.
+pre_test_object_deps_done=no
+for p in `eval "$output_verbose_link_cmd"`; do
+case $p in
+-L* | -R* | -l*)
+# Some compilers place space between "-{L,R}" and the path.
+# Remove the space.
+if test $p = "-L" ||
+test $p = "-R"; then
+	 prev=$p
+	 continue
+else
+	 prev=
+fi
+if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+fi
+;;
+*.$objext)
+# This assumes that the test object file only shows up
+# once in the compiler output.
+if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+fi
+if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+fi
+;;
+*) ;; # Ignore the rest.
+esac
+done
+# Clean up.
+rm -f a.out a.exe
+else
+echo "libtool.m4: error: problem compiling $1 test program"
+fi
+$RM -f confest.$objext
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+# Interix 3.5 installs completely hosed .la files for C++, so rather than
+# hack all around it, let's just trust "g++" to DTRT.
+_LT_TAGVAR(predep_objects,$1)=
+_LT_TAGVAR(postdep_objects,$1)=
+_LT_TAGVAR(postdeps,$1)=
+;;
+linux*)
+case `$CC -V 2>&1 | sed 5q` in
+*Sun\ C*)
+# Sun C++ 5.9
+# The more standards-conforming stlport4 library is
+# incompatible with the Cstd library. Avoid specifying
+# it if it's in CXXFLAGS. Ignore libCrun as
+# -library=stlport4 depends on it.
+case " $CXX $CXXFLAGS " in
+*" -library=stlport4 "*)
+solaris_use_stlport4=yes
+;;
+esac
+if test "$solaris_use_stlport4" != yes; then
+_LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+fi
+;;
+esac
+;;
+solaris*)
+case $cc_basename in
+CC*)
+# The more standards-conforming stlport4 library is
+# incompatible with the Cstd library. Avoid specifying
+# it if it's in CXXFLAGS. Ignore libCrun as
+# -library=stlport4 depends on it.
+case " $CXX $CXXFLAGS " in
+*" -library=stlport4 "*)
+solaris_use_stlport4=yes
+;;
+esac
+# Adding this requires a known-good setup of shared libraries for
+# Sun compiler versions before 5.6, else PIC objects from an old
+# archive will be linked into the output, leading to subtle bugs.
+if test "$solaris_use_stlport4" != yes; then
+_LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+fi
+;;
+esac
+;;
+esac
+])
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+_LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+_LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+[The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+[Dependencies to place before and after the objects being linked to
+create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+[The library search path used internally by the compiler when linking
+a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+_lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# Source file extension for f77 test sources.
+ac_ext=f
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="\
+subroutine t
+return
+end
+"
+# Code to be used in simple link tests
+lt_simple_link_test_code="\
+program t
+end
+"
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+CC=${F77-"f77"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+GCC=$G77
+if test -n "$compiler"; then
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+test "$enable_shared" = yes && enable_static=no
+if test -n "$RANLIB"; then
+archive_cmds="$archive_cmds~\$RANLIB \$lib"
+postinstall_cmds='$RANLIB $lib'
+fi
+;;
+aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+;;
+esac
+AC_MSG_RESULT([$enable_shared])
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+_LT_TAGVAR(GCC, $1)="$G77"
+_LT_TAGVAR(LD, $1)="$LD"
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+_LT_COMPILER_PIC($1)
+_LT_COMPILER_C_O($1)
+_LT_COMPILER_FILE_LOCKS($1)
+_LT_LINKER_SHLIBS($1)
+_LT_SYS_DYNAMIC_LINKER($1)
+_LT_LINKER_HARDCODE_LIBPATH($1)
+_LT_CONFIG($1)
+fi # test -n "$compiler"
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+_lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="\
+subroutine t
+return
+end
+"
+# Code to be used in simple link tests
+lt_simple_link_test_code="\
+program t
+end
+"
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+CC=${FC-"f95"}
+compiler=$CC
+GCC=$ac_cv_fc_compiler_gnu
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+if test -n "$compiler"; then
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case $host_os in
+aix3*)
+test "$enable_shared" = yes && enable_static=no
+if test -n "$RANLIB"; then
+archive_cmds="$archive_cmds~\$RANLIB \$lib"
+postinstall_cmds='$RANLIB $lib'
+fi
+;;
+aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+;;
+esac
+AC_MSG_RESULT([$enable_shared])
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+_LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+_LT_TAGVAR(LD, $1)="$LD"
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+_LT_SYS_HIDDEN_LIBDEPS($1)
+_LT_COMPILER_PIC($1)
+_LT_COMPILER_C_O($1)
+_LT_COMPILER_FILE_LOCKS($1)
+_LT_LINKER_SHLIBS($1)
+_LT_SYS_DYNAMIC_LINKER($1)
+_LT_LINKER_HARDCODE_LIBPATH($1)
+_LT_CONFIG($1)
+fi # test -n "$compiler"
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+# Source file extension for Java test sources.
+ac_ext=java
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+_LT_COMPILER_NO_RTTI($1)
+_LT_COMPILER_PIC($1)
+_LT_COMPILER_C_O($1)
+_LT_COMPILER_FILE_LOCKS($1)
+_LT_LINKER_SHLIBS($1)
+_LT_LINKER_HARDCODE_LIBPATH($1)
+_LT_CONFIG($1)
+fi
+AC_LANG_RESTORE
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+# Source file extension for RC test sources.
+ac_ext=rc
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+if test -n "$compiler"; then
+:
+_LT_CONFIG($1)
+fi
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj,)
+test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+AC_SUBST(GCJFLAGS)])])[]dnl
+])
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+[Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+IFS=$as_save_IFS
+test -z "$as_dir" && as_dir=.
+for lt_ac_prog in sed gsed; do
+for ac_exec_ext in '' $ac_executable_extensions; do
+if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+fi
+done
+done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+test ! -f $lt_ac_sed && continue
+cat /dev/null > conftest.in
+lt_ac_count=0
+echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+# Check for GNU sed and select it if it is found.
+if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+lt_cv_path_SED=$lt_ac_sed
+break
+fi
+while true; do
+cat conftest.in conftest.in >conftest.tmp
+mv conftest.tmp conftest.in
+cp conftest.in conftest.nl
+echo >>conftest.nl
+$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+cmp -s conftest.out conftest.nl || break
+# 10000 chars as input seems more than enough
+test $lt_ac_count -gt 10 && break
+lt_ac_count=`expr $lt_ac_count + 1`
+if test $lt_ac_count -gt $lt_ac_max; then
+lt_ac_max=$lt_ac_count
+lt_cv_path_SED=$lt_ac_sed
+fi
+done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+= c,a/b,, \
+&& eval 'test $(( 1 + 1 )) -eq 2 \
+&& test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+&& xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+>/dev/null 2>&1 \
+&& lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+lt_unset=unset
+else
+lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+A) # ASCII based system
+# \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+lt_SP2NL='tr \040 \012'
+lt_NL2SP='tr \015\012 \040\040'
+;;
+*) # EBCDIC based system
+lt_SP2NL='tr \100 \n'
+lt_NL2SP='tr \r\n \100\100'
+;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+yes)
+cat << \_LT_EOF >> "$cfgfile"
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+case ${1} in
+*/*) func_dirname_result="${1%/*}${2}" ;;
+*  ) func_dirname_result="${3}" ;;
+esac
+}
+# func_basename file
+func_basename ()
+{
+func_basename_result="${1##*/}"
+}
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+case ${1} in
+*/*) func_dirname_result="${1%/*}${2}" ;;
+*  ) func_dirname_result="${3}" ;;
+esac
+func_basename_result="${1##*/}"
+}
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+# pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+# positional parameters, so assign one to ordinary parameter first.
+func_stripname_result=${3}
+func_stripname_result=${func_stripname_result#"${1}"}
+func_stripname_result=${func_stripname_result%"${2}"}
+}
+# func_opt_split
+func_opt_split ()
+{
+func_opt_split_opt=${1%%=*}
+func_opt_split_arg=${1#*=}
+}
+# func_lo2o object
+func_lo2o ()
+{
+case ${1} in
+*.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+*)    func_lo2o_result=${1} ;;
+esac
+}
+# func_xform libobj-or-source
+func_xform ()
+{
+func_xform_result=${1%.*}.lo
+}
+# func_arith arithmetic-term...
+func_arith ()
+{
+func_arith_result=$(( $[*] ))
+}
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+func_len_result=${#1}
+}
+_LT_EOF
+;;
+*) # Bourne compatible functions.
+cat << \_LT_EOF >> "$cfgfile"
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+# Extract subdirectory from the argument.
+func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+if test "X$func_dirname_result" = "X${1}"; then
+func_dirname_result="${3}"
+else
+func_dirname_result="$func_dirname_result${2}"
+fi
+}
+# func_basename file
+func_basename ()
+{
+func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+case ${2} in
+.*) func_stripname_result=`$ECHO "X${3}" \
+| $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+*)  func_stripname_result=`$ECHO "X${3}" \
+| $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+esac
+}
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+# func_opt_split
+func_opt_split ()
+{
+func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+# func_lo2o object
+func_lo2o ()
+{
+func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+# func_xform libobj-or-source
+func_xform ()
+{
+func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+# func_arith arithmetic-term...
+func_arith ()
+{
+func_arith_result=`expr "$[@]"`
+}
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+_LT_EOF
+esac
+case $lt_shell_append in
+yes)
+cat << \_LT_EOF >> "$cfgfile"
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+eval "$[1]+=\$[2]"
+}
+_LT_EOF
+;;
+*)
+cat << \_LT_EOF >> "$cfgfile"
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+eval "$[1]=\$$[1]\$[2]"
+}
+_LT_EOF
+;;
+esac
+])

Mercurial > sdl-ios-xcode

comparison acinclude/libtool.m4 @ 3342:3da232c5980a