Mercurial > sdl-ios-xcode
annotate src/video/fbcon/matrox_regs.h @ 3099:82e60908fab1
Date: Mon, 23 Mar 2009 09:17:24 +0200
From: "Mike Gorchak"
Subject: New QNX patches
Please apply patch qnx4.diff, which is attached. What has been done:
1)Added back OpenGL ES renderer for QNX target. Added few corrections to
OpenGL ES renderer to let it work under QNX. OpenGL ES renderer do not
support textures under QNX, so I think some additional work must be done.
2) Added GL_OES_query_matrix extension to SDL_opengles.h header file, which
required by OpenGL ES 1.1 specification.
3) Added attribute clearing at the entrance of function
SDL_GL_GetAttribure(). Added error checking into the function
SDL_GL_GetAttribure(), because some attributes can't be obtained in OpenGL
ES 1.0.
4) Porting testdyngles to OpenGL ES 1.0 (1.1 has glColor4ub() and
glColor4f() functions, but 1.0 has glColor4f() only).
5) Added error checking after obtaining attributes using
SDL_GL_GetAttribute() function to the testgl2 and testgles.
6) Small correction to testmultiaudio with printing errors.
7) Added software and accelerated OpenGL ES 1.0 support into the QNX GF
driver.
Please remove ./src/audio/nto directory - it will not be used anymore.
Please create ./src/audio/qsa directory and add content of the archive
qsa.tar.gz into this directory. I rewrote some sound code, added support for
multiple audio cards, enumeration, etc. Added initial support for capture.
As far as I can understand SDL 1.3 is not supporting audio capture right now
? Sam, Am I right ? Or audio capture must be supported through the
PlayDevice routine ?
And last, please put file SDL_gf_opengles.c to the ./src/video/qnxgf
directory. It is OpenGL ES 1.1 emulation layer for some functions, which are
not supported by OpenGL ES 1.0.
| author | Sam Lantinga <slouken@libsdl.org> |
|---|---|
| date | Tue, 24 Mar 2009 10:33:12 +0000 |
| parents | c121d94672cb |
| children |
| rev | line source |
|---|---|
| 0 | 1 |
| 2 /* | |
| 3 * MGA Millennium (MGA2064W) functions | |
| 4 * MGA Mystique (MGA1064SG) functions | |
| 5 * | |
| 6 * Copyright 1996 The XFree86 Project, Inc. | |
| 7 * | |
| 8 * Authors | |
| 9 * Dirk Hohndel | |
| 10 * hohndel@XFree86.Org | |
| 11 * David Dawes | |
| 12 * dawes@XFree86.Org | |
| 13 * Contributors: | |
| 14 * Guy DESBIEF, Aix-en-provence, France | |
| 15 * g.desbief@aix.pacwan.net | |
| 16 * MGA1064SG Mystique register file | |
| 17 */ | |
|
1895
c121d94672cb
SDL 1.2 is moving to a branch, and SDL 1.3 is becoming the head.
Sam Lantinga <slouken@libsdl.org>
parents:
0
diff
changeset
|
18 |
| 0 | 19 |
| 20 #ifndef _MGA_REG_H_ | |
| 21 #define _MGA_REG_H_ | |
| 22 | |
| 23 #define MGAREG_DWGCTL 0x1c00 | |
| 24 #define MGAREG_MACCESS 0x1c04 | |
| 25 /* the following is a mystique only register */ | |
| 26 #define MGAREG_MCTLWTST 0x1c08 | |
| 27 #define MGAREG_ZORG 0x1c0c | |
| 28 | |
| 29 #define MGAREG_PAT0 0x1c10 | |
| 30 #define MGAREG_PAT1 0x1c14 | |
| 31 #define MGAREG_PLNWT 0x1c1c | |
| 32 | |
| 33 #define MGAREG_BCOL 0x1c20 | |
| 34 #define MGAREG_FCOL 0x1c24 | |
| 35 | |
| 36 #define MGAREG_SRC0 0x1c30 | |
| 37 #define MGAREG_SRC1 0x1c34 | |
| 38 #define MGAREG_SRC2 0x1c38 | |
| 39 #define MGAREG_SRC3 0x1c3c | |
| 40 | |
| 41 #define MGAREG_XYSTRT 0x1c40 | |
| 42 #define MGAREG_XYEND 0x1c44 | |
| 43 | |
| 44 #define MGAREG_SHIFT 0x1c50 | |
| 45 /* the following is a mystique only register */ | |
| 46 #define MGAREG_DMAPAD 0x1c54 | |
| 47 #define MGAREG_SGN 0x1c58 | |
| 48 #define MGAREG_LEN 0x1c5c | |
| 49 | |
| 50 #define MGAREG_AR0 0x1c60 | |
| 51 #define MGAREG_AR1 0x1c64 | |
| 52 #define MGAREG_AR2 0x1c68 | |
| 53 #define MGAREG_AR3 0x1c6c | |
| 54 #define MGAREG_AR4 0x1c70 | |
| 55 #define MGAREG_AR5 0x1c74 | |
| 56 #define MGAREG_AR6 0x1c78 | |
| 57 | |
| 58 #define MGAREG_CXBNDRY 0x1c80 | |
| 59 #define MGAREG_FXBNDRY 0x1c84 | |
| 60 #define MGAREG_YDSTLEN 0x1c88 | |
| 61 #define MGAREG_PITCH 0x1c8c | |
| 62 | |
| 63 #define MGAREG_YDST 0x1c90 | |
| 64 #define MGAREG_YDSTORG 0x1c94 | |
| 65 #define MGAREG_YTOP 0x1c98 | |
| 66 #define MGAREG_YBOT 0x1c9c | |
| 67 | |
| 68 #define MGAREG_CXLEFT 0x1ca0 | |
| 69 #define MGAREG_CXRIGHT 0x1ca4 | |
| 70 #define MGAREG_FXLEFT 0x1ca8 | |
| 71 #define MGAREG_FXRIGHT 0x1cac | |
| 72 | |
| 73 #define MGAREG_XDST 0x1cb0 | |
| 74 | |
| 75 #define MGAREG_DR0 0x1cc0 | |
| 76 #define MGAREG_DR1 0x1cc4 | |
| 77 #define MGAREG_DR2 0x1cc8 | |
| 78 #define MGAREG_DR3 0x1ccc | |
| 79 | |
| 80 #define MGAREG_DR4 0x1cd0 | |
| 81 #define MGAREG_DR5 0x1cd4 | |
| 82 #define MGAREG_DR6 0x1cd8 | |
| 83 #define MGAREG_DR7 0x1cdc | |
| 84 | |
| 85 #define MGAREG_DR8 0x1ce0 | |
| 86 #define MGAREG_DR9 0x1ce4 | |
| 87 #define MGAREG_DR10 0x1ce8 | |
| 88 #define MGAREG_DR11 0x1cec | |
| 89 | |
| 90 #define MGAREG_DR12 0x1cf0 | |
| 91 #define MGAREG_DR13 0x1cf4 | |
| 92 #define MGAREG_DR14 0x1cf8 | |
| 93 #define MGAREG_DR15 0x1cfc | |
| 94 | |
| 95 #define MGAREG_SRCORG 0x2cb4 | |
| 96 #define MGAREG_DSTORG 0x2cb8 | |
| 97 | |
| 98 /* add or or this to one of the previous "power registers" to start | |
| 99 the drawing engine */ | |
| 100 | |
| 101 #define MGAREG_EXEC 0x0100 | |
| 102 | |
| 103 #define MGAREG_FIFOSTATUS 0x1e10 | |
| 104 #define MGAREG_STATUS 0x1e14 | |
| 105 #define MGAREG_ICLEAR 0x1e18 | |
| 106 #define MGAREG_IEN 0x1e1c | |
| 107 | |
| 108 #define MGAREG_VCOUNT 0x1e20 | |
| 109 | |
| 110 #define MGAREG_Reset 0x1e40 | |
| 111 | |
| 112 #define MGAREG_OPMODE 0x1e54 | |
| 113 | |
| 114 /* OPMODE register additives */ | |
| 115 | |
| 116 #define MGAOPM_DMA_GENERAL (0x00 << 2) | |
| 117 #define MGAOPM_DMA_BLIT (0x01 << 2) | |
| 118 #define MGAOPM_DMA_VECTOR (0x10 << 2) | |
| 119 | |
| 120 /* DWGCTL register additives */ | |
| 121 | |
| 122 /* Lines */ | |
| 123 | |
| 124 #define MGADWG_LINE_OPEN 0x00 | |
| 125 #define MGADWG_AUTOLINE_OPEN 0x01 | |
| 126 #define MGADWG_LINE_CLOSE 0x02 | |
| 127 #define MGADWG_AUTOLINE_CLOSE 0x03 | |
| 128 | |
| 129 /* Trapezoids */ | |
| 130 #define MGADWG_TRAP 0x04 | |
| 131 #define MGADWG_TEXTURE_TRAP 0x05 | |
| 132 | |
| 133 /* BitBlts */ | |
| 134 | |
| 135 #define MGADWG_BITBLT 0x08 | |
| 136 #define MGADWG_FBITBLT 0x0c | |
| 137 #define MGADWG_ILOAD 0x09 | |
| 138 #define MGADWG_ILOAD_SCALE 0x0d | |
| 139 #define MGADWG_ILOAD_FILTER 0x0f | |
| 140 #define MGADWG_IDUMP 0x0a | |
| 141 | |
| 142 /* atype access to WRAM */ | |
| 143 | |
| 144 #define MGADWG_RPL ( 0x00 << 4 ) | |
| 145 #define MGADWG_RSTR ( 0x01 << 4 ) | |
| 146 #define MGADWG_ZI ( 0x03 << 4 ) | |
| 147 #define MGADWG_BLK ( 0x04 << 4 ) | |
| 148 #define MGADWG_I ( 0x07 << 4 ) | |
| 149 | |
| 150 /* specifies whether bit blits are linear or xy */ | |
| 151 #define MGADWG_LINEAR ( 0x01 << 7 ) | |
| 152 | |
| 153 /* z drawing mode. use MGADWG_NOZCMP for always */ | |
| 154 | |
| 155 #define MGADWG_NOZCMP ( 0x00 << 8 ) | |
|
1895
c121d94672cb
SDL 1.2 is moving to a branch, and SDL 1.3 is becoming the head.
Sam Lantinga <slouken@libsdl.org>
parents:
0
diff
changeset
|
156 #define MGADWG_ZE ( 0x02 << 8 ) |
| 0 | 157 #define MGADWG_ZNE ( 0x03 << 8 ) |
| 158 #define MGADWG_ZLT ( 0x04 << 8 ) | |
| 159 #define MGADWG_ZLTE ( 0x05 << 8 ) | |
| 160 #define MGADWG_GT ( 0x06 << 8 ) | |
| 161 #define MGADWG_GTE ( 0x07 << 8 ) | |
| 162 | |
| 163 /* use this to force colour expansion circuitry to do its stuff */ | |
| 164 | |
| 165 #define MGADWG_SOLID ( 0x01 << 11 ) | |
| 166 | |
| 167 /* ar register at zero */ | |
| 168 | |
| 169 #define MGADWG_ARZERO ( 0x01 << 12 ) | |
| 170 | |
| 171 #define MGADWG_SGNZERO ( 0x01 << 13 ) | |
| 172 | |
| 173 #define MGADWG_SHIFTZERO ( 0x01 << 14 ) | |
| 174 | |
| 175 /* See table on 4-43 for bop ALU operations */ | |
| 176 | |
| 177 /* See table on 4-44 for translucidity masks */ | |
| 178 | |
| 179 #define MGADWG_BMONOLEF ( 0x00 << 25 ) | |
| 180 #define MGADWG_BMONOWF ( 0x04 << 25 ) | |
| 181 #define MGADWG_BPLAN ( 0x01 << 25 ) | |
| 182 | |
| 183 /* note that if bfcol is specified and you're doing a bitblt, it causes | |
| 184 a fbitblt to be performed, so check that you obey the fbitblt rules */ | |
| 185 | |
| 186 #define MGADWG_BFCOL ( 0x02 << 25 ) | |
| 187 #define MGADWG_BUYUV ( 0x0e << 25 ) | |
| 188 #define MGADWG_BU32BGR ( 0x03 << 25 ) | |
| 189 #define MGADWG_BU32RGB ( 0x07 << 25 ) | |
| 190 #define MGADWG_BU24BGR ( 0x0b << 25 ) | |
| 191 #define MGADWG_BU24RGB ( 0x0f << 25 ) | |
| 192 | |
|
1895
c121d94672cb
SDL 1.2 is moving to a branch, and SDL 1.3 is becoming the head.
Sam Lantinga <slouken@libsdl.org>
parents:
0
diff
changeset
|
193 #define MGADWG_REPLACE 0x000C0000 /* From Linux kernel sources */ |
| 0 | 194 #define MGADWG_PATTERN ( 0x01 << 29 ) |
| 195 #define MGADWG_TRANSC ( 0x01 << 30 ) | |
| 196 #define MGADWG_NOCLIP ( 0x01 << 31 ) | |
| 197 #define MGAREG_MISC_WRITE 0x3c2 | |
| 198 #define MGAREG_MISC_READ 0x3cc | |
| 199 #define MGAREG_MISC_IOADSEL (0x1 << 0) | |
| 200 #define MGAREG_MISC_RAMMAPEN (0x1 << 1) | |
| 201 #define MGAREG_MISC_CLK_SEL_VGA25 (0x0 << 2) | |
| 202 #define MGAREG_MISC_CLK_SEL_VGA28 (0x1 << 2) | |
| 203 #define MGAREG_MISC_CLK_SEL_MGA_PIX (0x2 << 2) | |
| 204 #define MGAREG_MISC_CLK_SEL_MGA_MSK (0x3 << 2) | |
| 205 #define MGAREG_MISC_VIDEO_DIS (0x1 << 4) | |
| 206 #define MGAREG_MISC_HIGH_PG_SEL (0x1 << 5) | |
|
1895
c121d94672cb
SDL 1.2 is moving to a branch, and SDL 1.3 is becoming the head.
Sam Lantinga <slouken@libsdl.org>
parents:
0
diff
changeset
|
207 |
| 0 | 208 /* MMIO VGA registers */ |
| 209 #define MGAREG_CRTC_INDEX 0x1fd4 | |
| 210 #define MGAREG_CRTC_DATA 0x1fd5 | |
| 211 #define MGAREG_CRTCEXT_INDEX 0x1fde | |
| 212 #define MGAREG_CRTCEXT_DATA 0x1fdf | |
| 213 | |
| 214 | |
| 215 /* MGA bits for registers PCI_OPTION_REG */ | |
| 216 #define MGA1064_OPT_SYS_CLK_PCI ( 0x00 << 0 ) | |
| 217 #define MGA1064_OPT_SYS_CLK_PLL ( 0x01 << 0 ) | |
| 218 #define MGA1064_OPT_SYS_CLK_EXT ( 0x02 << 0 ) | |
| 219 #define MGA1064_OPT_SYS_CLK_MSK ( 0x03 << 0 ) | |
| 220 | |
| 221 #define MGA1064_OPT_SYS_CLK_DIS ( 0x01 << 2 ) | |
| 222 #define MGA1064_OPT_G_CLK_DIV_1 ( 0x01 << 3 ) | |
| 223 #define MGA1064_OPT_M_CLK_DIV_1 ( 0x01 << 4 ) | |
| 224 | |
| 225 #define MGA1064_OPT_SYS_PLL_PDN ( 0x01 << 5 ) | |
| 226 #define MGA1064_OPT_VGA_ION ( 0x01 << 8 ) | |
| 227 | |
| 228 /* MGA registers in PCI config space */ | |
| 229 #define PCI_MGA_INDEX 0x44 | |
| 230 #define PCI_MGA_DATA 0x48 | |
| 231 #define PCI_MGA_OPTION2 0x50 | |
| 232 #define PCI_MGA_OPTION3 0x54 | |
| 233 | |
| 234 #define RAMDAC_OFFSET 0x3c00 | |
| 235 | |
| 236 /* TVP3026 direct registers */ | |
| 237 | |
| 238 #define TVP3026_INDEX 0x00 | |
| 239 #define TVP3026_WADR_PAL 0x00 | |
| 240 #define TVP3026_COL_PAL 0x01 | |
| 241 #define TVP3026_PIX_RD_MSK 0x02 | |
| 242 #define TVP3026_RADR_PAL 0x03 | |
| 243 #define TVP3026_CUR_COL_ADDR 0x04 | |
| 244 #define TVP3026_CUR_COL_DATA 0x05 | |
| 245 #define TVP3026_DATA 0x0a | |
| 246 #define TVP3026_CUR_RAM 0x0b | |
| 247 #define TVP3026_CUR_XLOW 0x0c | |
| 248 #define TVP3026_CUR_XHI 0x0d | |
| 249 #define TVP3026_CUR_YLOW 0x0e | |
| 250 #define TVP3026_CUR_YHI 0x0f | |
| 251 | |
| 252 /* TVP3026 indirect registers */ | |
| 253 | |
| 254 #define TVP3026_SILICON_REV 0x01 | |
| 255 #define TVP3026_CURSOR_CTL 0x06 | |
| 256 #define TVP3026_LATCH_CTL 0x0f | |
| 257 #define TVP3026_TRUE_COLOR_CTL 0x18 | |
| 258 #define TVP3026_MUX_CTL 0x19 | |
| 259 #define TVP3026_CLK_SEL 0x1a | |
| 260 #define TVP3026_PAL_PAGE 0x1c | |
| 261 #define TVP3026_GEN_CTL 0x1d | |
| 262 #define TVP3026_MISC_CTL 0x1e | |
| 263 #define TVP3026_GEN_IO_CTL 0x2a | |
| 264 #define TVP3026_GEN_IO_DATA 0x2b | |
| 265 #define TVP3026_PLL_ADDR 0x2c | |
| 266 #define TVP3026_PIX_CLK_DATA 0x2d | |
| 267 #define TVP3026_MEM_CLK_DATA 0x2e | |
| 268 #define TVP3026_LOAD_CLK_DATA 0x2f | |
| 269 #define TVP3026_KEY_RED_LOW 0x32 | |
| 270 #define TVP3026_KEY_RED_HI 0x33 | |
| 271 #define TVP3026_KEY_GREEN_LOW 0x34 | |
| 272 #define TVP3026_KEY_GREEN_HI 0x35 | |
| 273 #define TVP3026_KEY_BLUE_LOW 0x36 | |
| 274 #define TVP3026_KEY_BLUE_HI 0x37 | |
| 275 #define TVP3026_KEY_CTL 0x38 | |
| 276 #define TVP3026_MCLK_CTL 0x39 | |
| 277 #define TVP3026_SENSE_TEST 0x3a | |
| 278 #define TVP3026_TEST_DATA 0x3b | |
| 279 #define TVP3026_CRC_LSB 0x3c | |
| 280 #define TVP3026_CRC_MSB 0x3d | |
| 281 #define TVP3026_CRC_CTL 0x3e | |
| 282 #define TVP3026_ID 0x3f | |
| 283 #define TVP3026_RESET 0xff | |
| 284 | |
| 285 | |
| 286 /* MGA1064 DAC Register file */ | |
| 287 /* MGA1064 direct registers */ | |
| 288 | |
| 289 #define MGA1064_INDEX 0x00 | |
| 290 #define MGA1064_WADR_PAL 0x00 | |
| 291 #define MGA1064_COL_PAL 0x01 | |
| 292 #define MGA1064_PIX_RD_MSK 0x02 | |
| 293 #define MGA1064_RADR_PAL 0x03 | |
| 294 #define MGA1064_DATA 0x0a | |
| 295 | |
| 296 #define MGA1064_CUR_XLOW 0x0c | |
| 297 #define MGA1064_CUR_XHI 0x0d | |
| 298 #define MGA1064_CUR_YLOW 0x0e | |
| 299 #define MGA1064_CUR_YHI 0x0f | |
| 300 | |
| 301 /* MGA1064 indirect registers */ | |
| 302 #define MGA1064_CURSOR_BASE_ADR_LOW 0x04 | |
| 303 #define MGA1064_CURSOR_BASE_ADR_HI 0x05 | |
| 304 #define MGA1064_CURSOR_CTL 0x06 | |
| 305 #define MGA1064_CURSOR_COL0_RED 0x08 | |
| 306 #define MGA1064_CURSOR_COL0_GREEN 0x09 | |
| 307 #define MGA1064_CURSOR_COL0_BLUE 0x0a | |
| 308 | |
| 309 #define MGA1064_CURSOR_COL1_RED 0x0c | |
| 310 #define MGA1064_CURSOR_COL1_GREEN 0x0d | |
| 311 #define MGA1064_CURSOR_COL1_BLUE 0x0e | |
| 312 | |
| 313 #define MGA1064_CURSOR_COL2_RED 0x010 | |
| 314 #define MGA1064_CURSOR_COL2_GREEN 0x011 | |
| 315 #define MGA1064_CURSOR_COL2_BLUE 0x012 | |
| 316 | |
| 317 #define MGA1064_VREF_CTL 0x018 | |
| 318 | |
| 319 #define MGA1064_MUL_CTL 0x19 | |
| 320 #define MGA1064_MUL_CTL_8bits 0x0 | |
| 321 #define MGA1064_MUL_CTL_15bits 0x01 | |
| 322 #define MGA1064_MUL_CTL_16bits 0x02 | |
| 323 #define MGA1064_MUL_CTL_24bits 0x03 | |
| 324 #define MGA1064_MUL_CTL_32bits 0x04 | |
| 325 #define MGA1064_MUL_CTL_2G8V16bits 0x05 | |
| 326 #define MGA1064_MUL_CTL_G16V16bits 0x06 | |
| 327 #define MGA1064_MUL_CTL_32_24bits 0x07 | |
| 328 | |
| 329 #define MGAGDAC_XVREFCTRL 0x18 | |
| 330 #define MGA1064_PIX_CLK_CTL 0x1a | |
| 331 #define MGA1064_PIX_CLK_CTL_CLK_DIS ( 0x01 << 2 ) | |
| 332 #define MGA1064_PIX_CLK_CTL_CLK_POW_DOWN ( 0x01 << 3 ) | |
| 333 #define MGA1064_PIX_CLK_CTL_SEL_PCI ( 0x00 << 0 ) | |
| 334 #define MGA1064_PIX_CLK_CTL_SEL_PLL ( 0x01 << 0 ) | |
| 335 #define MGA1064_PIX_CLK_CTL_SEL_EXT ( 0x02 << 0 ) | |
| 336 #define MGA1064_PIX_CLK_CTL_SEL_MSK ( 0x03 << 0 ) | |
| 337 | |
| 338 #define MGA1064_GEN_CTL 0x1d | |
| 339 #define MGA1064_MISC_CTL 0x1e | |
| 340 #define MGA1064_MISC_CTL_DAC_POW_DN ( 0x01 << 0 ) | |
| 341 #define MGA1064_MISC_CTL_VGA ( 0x01 << 1 ) | |
| 342 #define MGA1064_MISC_CTL_DIS_CON ( 0x03 << 1 ) | |
| 343 #define MGA1064_MISC_CTL_MAFC ( 0x02 << 1 ) | |
| 344 #define MGA1064_MISC_CTL_VGA8 ( 0x01 << 3 ) | |
| 345 #define MGA1064_MISC_CTL_DAC_RAM_CS ( 0x01 << 4 ) | |
| 346 | |
| 347 #define MGA1064_GEN_IO_CTL 0x2a | |
| 348 #define MGA1064_GEN_IO_DATA 0x2b | |
| 349 #define MGA1064_SYS_PLL_M 0x2c | |
| 350 #define MGA1064_SYS_PLL_N 0x2d | |
| 351 #define MGA1064_SYS_PLL_P 0x2e | |
| 352 #define MGA1064_SYS_PLL_STAT 0x2f | |
| 353 #define MGA1064_ZOOM_CTL 0x38 | |
| 354 #define MGA1064_SENSE_TST 0x3a | |
| 355 | |
| 356 #define MGA1064_CRC_LSB 0x3c | |
| 357 #define MGA1064_CRC_MSB 0x3d | |
| 358 #define MGA1064_CRC_CTL 0x3e | |
| 359 #define MGA1064_COL_KEY_MSK_LSB 0x40 | |
| 360 #define MGA1064_COL_KEY_MSK_MSB 0x41 | |
| 361 #define MGA1064_COL_KEY_LSB 0x42 | |
| 362 #define MGA1064_COL_KEY_MSB 0x43 | |
| 363 #define MGA1064_PIX_PLLA_M 0x44 | |
| 364 #define MGA1064_PIX_PLLA_N 0x45 | |
| 365 #define MGA1064_PIX_PLLA_P 0x46 | |
| 366 #define MGA1064_PIX_PLLB_M 0x48 | |
| 367 #define MGA1064_PIX_PLLB_N 0x49 | |
| 368 #define MGA1064_PIX_PLLB_P 0x4a | |
| 369 #define MGA1064_PIX_PLLC_M 0x4c | |
| 370 #define MGA1064_PIX_PLLC_N 0x4d | |
| 371 #define MGA1064_PIX_PLLC_P 0x4e | |
| 372 | |
| 373 #define MGA1064_PIX_PLL_STAT 0x4f | |
| 374 | |
| 375 #endif | |
|
1895
c121d94672cb
SDL 1.2 is moving to a branch, and SDL 1.3 is becoming the head.
Sam Lantinga <slouken@libsdl.org>
parents:
0
diff
changeset
|
376 /* vi: set ts=4 sw=4 expandtab: */ |