# HG changeset patch # User Sam Lantinga # Date 1054565422 0 # Node ID 85e104fe14c2c2b9419e88c92656da760218390e # Parent 52864d66d168ab96b541e7d193607f5044b581af Date: Sun, 1 Jun 2003 15:38:45 -0700 (PDT) From: Jeff Brown Subject: [patch] SDL-1.2.5 + FreeBSD joystick axes, hat fixes Hello again! When I sent in some SDL fixes last December, I found out they'd already been fixed in the CVS version. This time, I checked the repository before bugging you. =) I'm using SDL-1.2.5 on a FreeBSD 4.6.2-RELEASE system, and in the course of getting my multi-analog-axis USB controller (with a hat switch!) working with d2x-sdl -- the SDL port of the Descent 2 engine -- I came across a few problems: 1) The second analog stick is reported as a slider in one direction, and "Rz" in the other. SDL was ignoring the Rz axis, so I added Rx/Ry/Rz to the set of things SDL considers to be axes. 2) After the above change, the set of JOYAXE_* axes for my gamepad was {0,1,3,7}; however, d2x-sdl expects the axes to be contiguously numbered from 0, which seems like a pretty reasonable expectation, rather than having to scan the entire space of axes that SDL may or may not have. So, I added a table lookup which maps the JOYAXE_* axis numbers to 0,1,... in the order they're detected by SDL_SYS_JoystickOpen(), when reporting them to the application. I also added a function "usage_to_joyaxe()" which maps the USB HUG_* usage values to JOYAXE_values, since the repeated case statements testing for HUG_* were getting out of hand. 3) The BSD joystick driver had no hat support, so I added it. It looks like our USB library can only support one hat switch per device, which makes life easy. The patch against SDL-1.2.5 which implements these changes is at: http://www.caida.org/~jabrown/patches/sdl-1.2.5-bsdhat.diff After applying, SDL's "testjoystick" reports all activity from my gamepad correctly, and d2x works too (though it needed some other fixes). Moving on... There is also a problem with slightly different USBHID library interfaces on different versions of FreeBSD. I wasn't going to mention this since the FreeBSD port for SDL-1.2.5 (and not SDL itself) was doing the FreeBSD version-specific patching, so I e-mailed the port maintainer with this change. However, I see that you've incorporated the FreeBSD version-checking stuff into the CVS version of SDL, so now it's relevant for you too. The problem is, the FreeBSD #if tests don't work right for FreeBSD 4.6.2-RELEASE. There may be other versions with this problem, but I've only tested 4.6.2-R. The following patch against your latest CVS version fixes this: --- SDL_sysjoystick.c-1.16 Tue Apr 15 09:02:08 2003 +++ SDL_sysjoystick.c Sun Jun 1 15:10:28 2003 @@ -420,6 +420,8 @@ # else len = hid_report_size(rd, repinfo[repind].kind, r->rid); # endif +# elif (__FreeBSD_version == 460002) + len = hid_report_size(rd, r->rid, repinfo[repind].kind); # else len = hid_report_size(rd, repinfo[repind].kind, &r->rid); #endif I hope this is all useful to you. I've been getting myself dizzy playing Descent 2 with it, all morning! -Jeff Brown P.S. My USB controller is a Thrustmaster Firestorm Dual Analog 2. That's probably irrelevant, but I threw it in for completeness. diff -r 52864d66d168 -r 85e104fe14c2 src/joystick/bsd/SDL_sysjoystick.c --- a/src/joystick/bsd/SDL_sysjoystick.c Thu May 29 04:52:36 2003 +0000 +++ b/src/joystick/bsd/SDL_sysjoystick.c Mon Jun 02 14:50:22 2003 +0000 @@ -100,7 +100,11 @@ JOYAXE_Y, JOYAXE_Z, JOYAXE_SLIDER, - JOYAXE_WHEEL + JOYAXE_WHEEL, + JOYAXE_RX, + JOYAXE_RY, + JOYAXE_RZ, + JOYAXE_count }; struct joystick_hwdata { @@ -112,10 +116,7 @@ } type; struct report_desc *repdesc; struct report inreport; -#if 0 - int axismin[]; - int axismax[]; -#endif + int axis_map[JOYAXE_count]; /* map present JOYAXE_* to 0,1,..*/ }; static char *joynames[MAX_JOYS]; @@ -180,6 +181,49 @@ return (joynames[index]); } +static int +usage_to_joyaxe(unsigned usage) +{ + int joyaxe; + switch (usage) { + case HUG_X: + joyaxe = JOYAXE_X; break; + case HUG_Y: + joyaxe = JOYAXE_Y; break; + case HUG_Z: + joyaxe = JOYAXE_Z; break; + case HUG_SLIDER: + joyaxe = JOYAXE_SLIDER; break; + case HUG_WHEEL: + joyaxe = JOYAXE_WHEEL; break; + case HUG_RX: + joyaxe = JOYAXE_RX; break; + case HUG_RY: + joyaxe = JOYAXE_RY; break; + case HUG_RZ: + joyaxe = JOYAXE_RZ; break; + default: + joyaxe = -1; + } + return joyaxe; +} + +static unsigned +hatval_to_sdl(Sint32 hatval) +{ + static const unsigned hat_dir_map[8] = { + SDL_HAT_UP, SDL_HAT_RIGHTUP, SDL_HAT_RIGHT, SDL_HAT_RIGHTDOWN, + SDL_HAT_DOWN, SDL_HAT_LEFTDOWN, SDL_HAT_LEFT, SDL_HAT_LEFTUP + }; + unsigned result; + if ((hatval & 7) == hatval) + result = hat_dir_map[hatval]; + else + result = SDL_HAT_CENTERED; + return result; +} + + int SDL_SYS_JoystickOpen(SDL_Joystick *joy) { @@ -206,6 +250,11 @@ hw->fd = fd; hw->path = strdup(path); hw->type = BSDJOY_UHID; + { + int ax; + for (ax = 0; ax < JOYAXE_count; ax++) + hw->axis_map[ax] = -1; + } hw->repdesc = hid_get_report_desc(fd); if (hw->repdesc == NULL) { SDL_SetError("%s: USB_GET_REPORT_DESC: %s", hw->path, @@ -259,23 +308,17 @@ break; case hid_input: switch (HID_PAGE(hitem.usage)) { - case HUP_GENERIC_DESKTOP: - switch (HID_USAGE(hitem.usage)) { - case HUG_X: - case HUG_Y: - case HUG_Z: - case HUG_SLIDER: - case HUG_WHEEL: -#if 0 - hw->axismin[joy->naxes] = - hitem.logical_minimum; - hw->axismax[joy->naxes] = - hitem.logical_maximum; -#endif - joy->naxes++; - break; - } - break; + case HUP_GENERIC_DESKTOP: { + unsigned usage = HID_USAGE(hitem.usage); + int joyaxe = usage_to_joyaxe(usage); + if (joyaxe >= 0) { + hw->axis_map[joyaxe] = joy->naxes; + joy->naxes++; + } else if (usage == HUG_HAT_SWITCH) { + joy->nhats++; + } + break; + } case HUP_BUTTON: joy->nbuttons++; break; @@ -329,35 +372,26 @@ switch (hitem.kind) { case hid_input: switch (HID_PAGE(hitem.usage)) { - case HUP_GENERIC_DESKTOP: - switch (HID_USAGE(hitem.usage)) { - case HUG_X: - naxe = JOYAXE_X; - goto scaleaxe; - case HUG_Y: - naxe = JOYAXE_Y; - goto scaleaxe; - case HUG_Z: - naxe = JOYAXE_Z; - goto scaleaxe; - case HUG_SLIDER: - naxe = JOYAXE_SLIDER; - goto scaleaxe; - case HUG_WHEEL: - naxe = JOYAXE_WHEEL; - goto scaleaxe; - default: - continue; - } -scaleaxe: + case HUP_GENERIC_DESKTOP: { + unsigned usage = HID_USAGE(hitem.usage); + int joyaxe = usage_to_joyaxe(usage); + if (joyaxe >= 0) { + naxe = joy->hwdata->axis_map[joyaxe]; + /* scaleaxe */ v = (Sint32)hid_get_data(REP_BUF_DATA(rep), - &hitem); + &hitem); v -= (hitem.logical_maximum + hitem.logical_minimum + 1)/2; v *= 32768/((hitem.logical_maximum - hitem.logical_minimum + 1)/2); if (v != joy->axes[naxe]) { - SDL_PrivateJoystickAxis(joy, naxe, v); + SDL_PrivateJoystickAxis(joy, naxe, v); } - break; + } else if (usage == HUG_HAT_SWITCH) { + v = (Sint32)hid_get_data(REP_BUF_DATA(rep), + &hitem); + SDL_PrivateJoystickHat(joy, 0, hatval_to_sdl(v)); + } + break; + } case HUP_BUTTON: v = (Sint32)hid_get_data(REP_BUF_DATA(rep), &hitem); @@ -420,6 +454,8 @@ # else len = hid_report_size(rd, repinfo[repind].kind, r->rid); # endif +# elif (__FreeBSD_version == 460002) + len = hid_report_size(rd, r->rid, repinfo[repind].kind); # else len = hid_report_size(rd, repinfo[repind].kind, &r->rid); #endif