Mercurial > sdl-ios-xcode

view docs/html/sdlconvertaudio.html @ 983:7f08bd66f1ca

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Date: Fri, 19 Nov 2004 06:23:53 -0800 (PST) From: Eric Wing Subject: OS X Mouse inversion problem fix (again) Here's yet another patch for the OS X mouse inversion problem. This should fix the problem once and for all. I know I've said this before, but *This time for sure!* :) If you recall, my last patch broke the non-OpenGL windowed code and caused the inversion to occur there instead. Max submitted a patch that partially reverted the changes back which included the os version hack which is currently the most recent CVS. Aaron Sullivan identified and reported to the mailing list the other day, that the last partial regression of the code broke OS X 10.2. Looking over the results, I'm thinking that I was slightly more successful than I thought at unifying the code. I think I was trying to unify the code base for OpenGL and non-OpenGL windowed modes for all versions of the OS. It looks like I failed at at unifying the OpenGL and non-OpenGL code, but I did succeed at unifying the OS versions. Thus, we no longer need the hack for the OS version checks. The partial regression still included an OS check which is what broke things for < 10.3. Attached is the patch for SDL_QuartzWM.m. It basically is a half-line change that removes one of the two checks that decides if the mouse coordinates need to be inverted, i.e: if (system_version >= 0x1030 && (SDL_VideoSurface->flags & SDL_OPENGL) ) becomes this: if(SDL_VideoSurface->flags & SDL_OPENGL) With Aaron's outstanding help, we have collectively tested: windowed OpenGL windowed non-OpenGL fullscreen OpenGL fullscreen non-OpenGL under OS X 10.2 (Jaguar), 10.3 (Panther), and 10.4 (Tiger). We don't have access to 10.0 or 10.1, but since the original problem didn't materialize until 10.3, I'm hopeful that testing 10.2 is sufficient. And now that the code is uniform, I'm also hoping we'll be safe moving forward to deal with future revisions of the OS with this issue.
author Sam Lantinga <slouken@libsdl.org>
date Sun, 21 Nov 2004 00:57:47 +0000
parents 355632dca928
children
line wrap: on
line source

<HTML
><HEAD
><TITLE
>SDL_ConvertAudio</TITLE
><META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
"><LINK
REL="HOME"
TITLE="SDL Library Documentation"
HREF="index.html"><LINK
REL="UP"
TITLE="Audio"
HREF="audio.html"><LINK
REL="PREVIOUS"
TITLE="SDL_BuildAudioCVT"
HREF="sdlbuildaudiocvt.html"><LINK
REL="NEXT"
TITLE="SDL_MixAudio"
HREF="sdlmixaudio.html"></HEAD
><BODY
CLASS="REFENTRY"
BGCOLOR="#FFF8DC"
TEXT="#000000"
LINK="#0000ee"
VLINK="#551a8b"
ALINK="#ff0000"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>SDL Library Documentation</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="sdlbuildaudiocvt.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
></TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="sdlmixaudio.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><H1
><A
NAME="SDLCONVERTAUDIO"
></A
>SDL_ConvertAudio</H1
><DIV
CLASS="REFNAMEDIV"
><A
NAME="AEN7048"
></A
><H2
>Name</H2
>SDL_ConvertAudio&nbsp;--&nbsp;Convert audio data to a desired audio format.</DIV
><DIV
CLASS="REFSYNOPSISDIV"
><A
NAME="AEN7051"
></A
><H2
>Synopsis</H2
><DIV
CLASS="FUNCSYNOPSIS"
><A
NAME="AEN7052"
></A
><P
></P
><PRE
CLASS="FUNCSYNOPSISINFO"
>#include "SDL.h"</PRE
><P
><CODE
><CODE
CLASS="FUNCDEF"
>int <B
CLASS="FSFUNC"
>SDL_ConvertAudio</B
></CODE
>(SDL_AudioCVT *cvt);</CODE
></P
><P
></P
></DIV
></DIV
><DIV
CLASS="REFSECT1"
><A
NAME="AEN7058"
></A
><H2
>Description</H2
><P
><TT
CLASS="FUNCTION"
>SDL_ConvertAudio</TT
> takes one parameter, <TT
CLASS="PARAMETER"
><I
>cvt</I
></TT
>, which was previously initilized. Initilizing a <A
HREF="sdlaudiocvt.html"
><SPAN
CLASS="STRUCTNAME"
>SDL_AudioCVT</SPAN
></A
> is a two step process. First of all, the structure must be passed to <A
HREF="sdlbuildaudiocvt.html"
><TT
CLASS="FUNCTION"
>SDL_BuildAudioCVT</TT
></A
> along with source and destination format parameters. Secondly, the <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>buf</I
></TT
> and <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>len</I
></TT
> fields must be setup. <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>buf</I
></TT
> should point to the audio data and <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>len</I
></TT
> should be set to the length of the audio data in bytes. Remember, the length of the buffer pointed to by <TT
CLASS="STRUCTFIELD"
><I
>buf</I
></TT
> show be <TT
CLASS="STRUCTFIELD"
><I
>len</I
></TT
>*<TT
CLASS="STRUCTFIELD"
><I
>len_mult</I
></TT
> bytes in length.</P
><P
>Once the <SPAN
CLASS="STRUCTNAME"
>SDL_AudioCVT</SPAN
>structure is initilized then we can pass it to <TT
CLASS="FUNCTION"
>SDL_ConvertAudio</TT
>, which will convert the audio data pointer to by <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>buf</I
></TT
>. If <TT
CLASS="FUNCTION"
>SDL_ConvertAudio</TT
> returned <SPAN
CLASS="RETURNVALUE"
>0</SPAN
> then the conversion was completed successfully, otherwise <SPAN
CLASS="RETURNVALUE"
>-1</SPAN
> is returned.</P
><P
>If the conversion completed successfully then the converted audio data can be read from <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>buf</I
></TT
>. The amount of valid, converted, audio data in the buffer is equal to <SPAN
CLASS="STRUCTNAME"
>cvt</SPAN
>-&#62;<TT
CLASS="STRUCTFIELD"
><I
>len</I
></TT
>*<TT
CLASS="STRUCTFIELD"
><I
>cvt</I
></TT
>-&#62;<SPAN
CLASS="STRUCTNAME"
>len_ratio</SPAN
>.</P
></DIV
><DIV
CLASS="REFSECT1"
><A
NAME="AEN7093"
></A
><H2
>Examples</H2
><PRE
CLASS="PROGRAMLISTING"
>/* Converting some WAV data to hardware format */
void my_audio_callback(void *userdata, Uint8 *stream, int len);

SDL_AudioSpec *desired, *obtained;
SDL_AudioSpec wav_spec;
SDL_AudioCVT  wav_cvt;
Uint32 wav_len;
Uint8 *wav_buf;
int ret;

/* Allocated audio specs */
desired = malloc(sizeof(SDL_AudioSpec));
obtained = malloc(sizeof(SDL_AudioSpec));

/* Set desired format */
desired-&#62;freq=22050;
desired-&#62;format=AUDIO_S16LSB;
desired-&#62;samples=8192;
desired-&#62;callback=my_audio_callback;
desired-&#62;userdata=NULL;

/* Open the audio device */
if ( SDL_OpenAudio(desired, obtained) &#60; 0 ){
  fprintf(stderr, "Couldn't open audio: %s\n", SDL_GetError());
  exit(-1);
}
        
free(desired);

/* Load the test.wav */
if( SDL_LoadWAV("test.wav", &#38;wav_spec, &#38;wav_buf, &#38;wav_len) == NULL ){
  fprintf(stderr, "Could not open test.wav: %s\n", SDL_GetError());
  SDL_CloseAudio();
  free(obtained);
  exit(-1);
}
                                            
/* Build AudioCVT */
ret = SDL_BuildAudioCVT(&#38;wav_cvt,
                        wav_spec.format, wav_spec.channels, wav_spec.freq,
                        obtained-&#62;format, obtained-&#62;channels, obtained-&#62;freq);

/* Check that the convert was built */
if(ret==-1){
  fprintf(stderr, "Couldn't build converter!\n");
  SDL_CloseAudio();
  free(obtained);
  SDL_FreeWAV(wav_buf);
}

/* Setup for conversion */
wav_cvt.buf = malloc(wav_len * wav_cvt.len_mult);
wav_cvt.len = wav_len;
memcpy(wav_cvt.buf, wav_buf, wav_len);

/* We can delete to original WAV data now */
SDL_FreeWAV(wav_buf);

/* And now we're ready to convert */
SDL_ConvertAudio(&#38;wav_cvt);

/* do whatever */
.
.
.
.
&#13;</PRE
></DIV
><DIV
CLASS="REFSECT1"
><A
NAME="AEN7096"
></A
><H2
>See Also</H2
><P
><A
HREF="sdlbuildaudiocvt.html"
><TT
CLASS="FUNCTION"
>SDL_BuildAudioCVT</TT
></A
>,
<A
HREF="sdlaudiocvt.html"
><TT
CLASS="FUNCTION"
>SDL_AudioCVT</TT
></A
></P
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="sdlbuildaudiocvt.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="index.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="sdlmixaudio.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>SDL_BuildAudioCVT</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="audio.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>SDL_MixAudio</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>