Mercurial > sdl-ios-xcode

view docs/html/guidevideoopengl.html @ 983:7f08bd66f1ca

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Date: Fri, 19 Nov 2004 06:23:53 -0800 (PST) From: Eric Wing Subject: OS X Mouse inversion problem fix (again) Here's yet another patch for the OS X mouse inversion problem. This should fix the problem once and for all. I know I've said this before, but *This time for sure!* :) If you recall, my last patch broke the non-OpenGL windowed code and caused the inversion to occur there instead. Max submitted a patch that partially reverted the changes back which included the os version hack which is currently the most recent CVS. Aaron Sullivan identified and reported to the mailing list the other day, that the last partial regression of the code broke OS X 10.2. Looking over the results, I'm thinking that I was slightly more successful than I thought at unifying the code. I think I was trying to unify the code base for OpenGL and non-OpenGL windowed modes for all versions of the OS. It looks like I failed at at unifying the OpenGL and non-OpenGL code, but I did succeed at unifying the OS versions. Thus, we no longer need the hack for the OS version checks. The partial regression still included an OS check which is what broke things for < 10.3. Attached is the patch for SDL_QuartzWM.m. It basically is a half-line change that removes one of the two checks that decides if the mouse coordinates need to be inverted, i.e: if (system_version >= 0x1030 && (SDL_VideoSurface->flags & SDL_OPENGL) ) becomes this: if(SDL_VideoSurface->flags & SDL_OPENGL) With Aaron's outstanding help, we have collectively tested: windowed OpenGL windowed non-OpenGL fullscreen OpenGL fullscreen non-OpenGL under OS X 10.2 (Jaguar), 10.3 (Panther), and 10.4 (Tiger). We don't have access to 10.0 or 10.1, but since the original problem didn't materialize until 10.3, I'm hopeful that testing 10.2 is sufficient. And now that the code is uniform, I'm also hoping we'll be safe moving forward to deal with future revisions of the OS with this issue.
author Sam Lantinga <slouken@libsdl.org>
date Sun, 21 Nov 2004 00:57:47 +0000
parents 355632dca928
children f12379c41042
line wrap: on
line source

<HTML
><HEAD
><TITLE
>Using OpenGL With SDL</TITLE
><META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
"><LINK
REL="HOME"
TITLE="SDL Library Documentation"
HREF="index.html"><LINK
REL="UP"
TITLE="Graphics and Video"
HREF="guidevideo.html"><LINK
REL="PREVIOUS"
TITLE="Graphics and Video"
HREF="guidevideo.html"><LINK
REL="NEXT"
TITLE="Input handling"
HREF="guideinput.html"></HEAD
><BODY
CLASS="SECT1"
BGCOLOR="#FFF8DC"
TEXT="#000000"
LINK="#0000ee"
VLINK="#551a8b"
ALINK="#ff0000"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>SDL Library Documentation</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="guidevideo.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
>Chapter 2. Graphics and Video</TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="guideinput.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><DIV
CLASS="SECT1"
><H1
CLASS="SECT1"
><A
NAME="GUIDEVIDEOOPENGL"
></A
>Using OpenGL With SDL</H1
><P
>SDL has the ability to create and use OpenGL contexts on several platforms(Linux/X11, Win32, BeOS, MacOS Classic/Toolbox, MacOS X, FreeBSD/X11 and Solaris/X11). This allows you to use SDL's audio, event handling, threads and times in your OpenGL applications (a function often performed by GLUT).</P
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN103"
></A
>Initialisation</H2
><P
>Initialising SDL to use OpenGL is not very different to initialising SDL normally. There are three differences; you must pass <TT
CLASS="LITERAL"
>SDL_OPENGL</TT
> to <A
HREF="sdlsetvideomode.html"
><TT
CLASS="FUNCTION"
>SDL_SetVideoMode</TT
></A
>, you must specify several GL attributes (depth buffer size, framebuffer sizes) using <A
HREF="sdlglsetattribute.html"
><TT
CLASS="FUNCTION"
>SDL_GL_SetAttribute</TT
></A
> and finally, if you wish to use double buffering you must specify it as a GL attribute, <SPAN
CLASS="emphasis"
><I
CLASS="EMPHASIS"
>not</I
></SPAN
> by passing the <TT
CLASS="LITERAL"
>SDL_DOUBLEBUF</TT
> flag to <TT
CLASS="FUNCTION"
>SDL_SetVideoMode</TT
>.</P
><DIV
CLASS="EXAMPLE"
><A
NAME="AEN114"
></A
><P
><B
>Example 2-7. Initializing SDL with OpenGL</B
></P
><PRE
CLASS="PROGRAMLISTING"
>    /* Information about the current video settings. */
    const SDL_VideoInfo* info = NULL;
    /* Dimensions of our window. */
    int width = 0;
    int height = 0;
    /* Color depth in bits of our window. */
    int bpp = 0;
    /* Flags we will pass into SDL_SetVideoMode. */
    int flags = 0;

    /* First, initialize SDL's video subsystem. */
    if( SDL_Init( SDL_INIT_VIDEO ) &#60; 0 ) {
        /* Failed, exit. */
        fprintf( stderr, "Video initialization failed: %s\n",
             SDL_GetError( ) );
        quit_tutorial( 1 );
    }

    /* Let's get some video information. */
    info = SDL_GetVideoInfo( );

    if( !info ) {
        /* This should probably never happen. */
        fprintf( stderr, "Video query failed: %s\n",
             SDL_GetError( ) );
        quit_tutorial( 1 );
    }

    /*
     * Set our width/height to 640/480 (you would
     * of course let the user decide this in a normal
     * app). We get the bpp we will request from
     * the display. On X11, VidMode can't change
     * resolution, so this is probably being overly
     * safe. Under Win32, ChangeDisplaySettings
     * can change the bpp.
     */
    width = 640;
    height = 480;
    bpp = info-&#62;vfmt-&#62;BitsPerPixel;

    /*
     * Now, we want to setup our requested
     * window attributes for our OpenGL window.
     * We want *at least* 5 bits of red, green
     * and blue. We also want at least a 16-bit
     * depth buffer.
     *
     * The last thing we do is request a double
     * buffered window. '1' turns on double
     * buffering, '0' turns it off.
     *
     * Note that we do not use SDL_DOUBLEBUF in
     * the flags to SDL_SetVideoMode. That does
     * not affect the GL attribute state, only
     * the standard 2D blitting setup.
     */
    SDL_GL_SetAttribute( SDL_GL_RED_SIZE, 5 );
    SDL_GL_SetAttribute( SDL_GL_GREEN_SIZE, 5 );
    SDL_GL_SetAttribute( SDL_GL_BLUE_SIZE, 5 );
    SDL_GL_SetAttribute( SDL_GL_DEPTH_SIZE, 16 );
    SDL_GL_SetAttribute( SDL_GL_DOUBLEBUFFER, 1 );

    /*
     * We want to request that SDL provide us
     * with an OpenGL window, in a fullscreen
     * video mode.
     *
     * EXERCISE:
     * Make starting windowed an option, and
     * handle the resize events properly with
     * glViewport.
     */
    flags = SDL_OPENGL | SDL_FULLSCREEN;

    /*
     * Set the video mode
     */
    if( SDL_SetVideoMode( width, height, bpp, flags ) == 0 ) {
        /* 
         * This could happen for a variety of reasons,
         * including DISPLAY not being set, the specified
         * resolution not being available, etc.
         */
        fprintf( stderr, "Video mode set failed: %s\n",
             SDL_GetError( ) );
        quit_tutorial( 1 );
    }</PRE
></DIV
></DIV
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN117"
></A
>Drawing</H2
><P
>Apart from initialisation, using OpenGL within SDL is the same as using OpenGL
with any other API, e.g. GLUT. You still use all the same function calls and
data types. However if you are using a double-buffered display, then you must
use
<A
HREF="sdlglswapbuffers.html"
><TT
CLASS="FUNCTION"
>SDL_GL_SwapBuffers()</TT
></A
>
to swap the buffers and update the display. To request double-buffering
with OpenGL, use
<A
HREF="sdlglsetattribute.html"
><TT
CLASS="FUNCTION"
>SDL_GL_SetAttribute</TT
></A
>
with <TT
CLASS="LITERAL"
>SDL_GL_DOUBLEBUFFER</TT
>, and use
<A
HREF="sdlglgetattribute.html"
><TT
CLASS="FUNCTION"
>SDL_GL_GetAttribute</TT
></A
>
to see if you actually got it.</P
><P
>A full example code listing is now presented below.</P
><DIV
CLASS="EXAMPLE"
><A
NAME="AEN128"
></A
><P
><B
>Example 2-8. SDL and OpenGL</B
></P
><PRE
CLASS="PROGRAMLISTING"
>/*
 * SDL OpenGL Tutorial.
 * (c) Michael Vance, 2000
 * briareos@lokigames.com
 *
 * Distributed under terms of the LGPL. 
 */

#include &#60;SDL/SDL.h&#62;
#include &#60;GL/gl.h&#62;
#include &#60;GL/glu.h&#62;

#include &#60;stdio.h&#62;
#include &#60;stdlib.h&#62;

static GLboolean should_rotate = GL_TRUE;

static void quit_tutorial( int code )
{
    /*
     * Quit SDL so we can release the fullscreen
     * mode and restore the previous video settings,
     * etc.
     */
    SDL_Quit( );

    /* Exit program. */
    exit( code );
}

static void handle_key_down( SDL_keysym* keysym )
{

    /* 
     * We're only interested if 'Esc' has
     * been presssed.
     *
     * EXERCISE: 
     * Handle the arrow keys and have that change the
     * viewing position/angle.
     */
    switch( keysym-&#62;sym ) {
    case SDLK_ESCAPE:
        quit_tutorial( 0 );
        break;
    case SDLK_SPACE:
        should_rotate = !should_rotate;
        break;
    default:
        break;
    }

}

static void process_events( void )
{
    /* Our SDL event placeholder. */
    SDL_Event event;

    /* Grab all the events off the queue. */
    while( SDL_PollEvent( &#38;event ) ) {

        switch( event.type ) {
        case SDL_KEYDOWN:
            /* Handle key presses. */
            handle_key_down( &#38;event.key.keysym );
            break;
        case SDL_QUIT:
            /* Handle quit requests (like Ctrl-c). */
            quit_tutorial( 0 );
            break;
        }

    }

}

static void draw_screen( void )
{
    /* Our angle of rotation. */
    static float angle = 0.0f;

    /*
     * EXERCISE:
     * Replace this awful mess with vertex
     * arrays and a call to glDrawElements.
     *
     * EXERCISE:
     * After completing the above, change
     * it to use compiled vertex arrays.
     *
     * EXERCISE:
     * Verify my windings are correct here ;).
     */
    static GLfloat v0[] = { -1.0f, -1.0f,  1.0f };
    static GLfloat v1[] = {  1.0f, -1.0f,  1.0f };
    static GLfloat v2[] = {  1.0f,  1.0f,  1.0f };
    static GLfloat v3[] = { -1.0f,  1.0f,  1.0f };
    static GLfloat v4[] = { -1.0f, -1.0f, -1.0f };
    static GLfloat v5[] = {  1.0f, -1.0f, -1.0f };
    static GLfloat v6[] = {  1.0f,  1.0f, -1.0f };
    static GLfloat v7[] = { -1.0f,  1.0f, -1.0f };
    static GLubyte red[]    = { 255,   0,   0, 255 };
    static GLubyte green[]  = {   0, 255,   0, 255 };
    static GLubyte blue[]   = {   0,   0, 255, 255 };
    static GLubyte white[]  = { 255, 255, 255, 255 };
    static GLubyte yellow[] = {   0, 255, 255, 255 };
    static GLubyte black[]  = {   0,   0,   0, 255 };
    static GLubyte orange[] = { 255, 255,   0, 255 };
    static GLubyte purple[] = { 255,   0, 255,   0 };

    /* Clear the color and depth buffers. */
    glClear( GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT );

    /* We don't want to modify the projection matrix. */
    glMatrixMode( GL_MODELVIEW );
    glLoadIdentity( );

    /* Move down the z-axis. */
    glTranslatef( 0.0, 0.0, -5.0 );

    /* Rotate. */
    glRotatef( angle, 0.0, 1.0, 0.0 );

    if( should_rotate ) {

        if( ++angle &#62; 360.0f ) {
            angle = 0.0f;
        }

    }

    /* Send our triangle data to the pipeline. */
    glBegin( GL_TRIANGLES );

    glColor4ubv( red );
    glVertex3fv( v0 );
    glColor4ubv( green );
    glVertex3fv( v1 );
    glColor4ubv( blue );
    glVertex3fv( v2 );

    glColor4ubv( red );
    glVertex3fv( v0 );
    glColor4ubv( blue );
    glVertex3fv( v2 );
    glColor4ubv( white );
    glVertex3fv( v3 );

    glColor4ubv( green );
    glVertex3fv( v1 );
    glColor4ubv( black );
    glVertex3fv( v5 );
    glColor4ubv( orange );
    glVertex3fv( v6 );

    glColor4ubv( green );
    glVertex3fv( v1 );
    glColor4ubv( orange );
    glVertex3fv( v6 );
    glColor4ubv( blue );
    glVertex3fv( v2 );

    glColor4ubv( black );
    glVertex3fv( v5 );
    glColor4ubv( yellow );
    glVertex3fv( v4 );
    glColor4ubv( purple );
    glVertex3fv( v7 );

    glColor4ubv( black );
    glVertex3fv( v5 );
    glColor4ubv( purple );
    glVertex3fv( v7 );
    glColor4ubv( orange );
    glVertex3fv( v6 );

    glColor4ubv( yellow );
    glVertex3fv( v4 );
    glColor4ubv( red );
    glVertex3fv( v0 );
    glColor4ubv( white );
    glVertex3fv( v3 );

    glColor4ubv( yellow );
    glVertex3fv( v4 );
    glColor4ubv( white );
    glVertex3fv( v3 );
    glColor4ubv( purple );
    glVertex3fv( v7 );

    glColor4ubv( white );
    glVertex3fv( v3 );
    glColor4ubv( blue );
    glVertex3fv( v2 );
    glColor4ubv( orange );
    glVertex3fv( v6 );

    glColor4ubv( white );
    glVertex3fv( v3 );
    glColor4ubv( orange );
    glVertex3fv( v6 );
    glColor4ubv( purple );
    glVertex3fv( v7 );

    glColor4ubv( green );
    glVertex3fv( v1 );
    glColor4ubv( red );
    glVertex3fv( v0 );
    glColor4ubv( yellow );
    glVertex3fv( v4 );

    glColor4ubv( green );
    glVertex3fv( v1 );
    glColor4ubv( yellow );
    glVertex3fv( v4 );
    glColor4ubv( black );
    glVertex3fv( v5 );

    glEnd( );

    /*
     * EXERCISE:
     * Draw text telling the user that 'Spc'
     * pauses the rotation and 'Esc' quits.
     * Do it using vetors and textured quads.
     */

    /*
     * Swap the buffers. This this tells the driver to
     * render the next frame from the contents of the
     * back-buffer, and to set all rendering operations
     * to occur on what was the front-buffer.
     *
     * Double buffering prevents nasty visual tearing
     * from the application drawing on areas of the
     * screen that are being updated at the same time.
     */
    SDL_GL_SwapBuffers( );
}

static void setup_opengl( int width, int height )
{
    float ratio = (float) width / (float) height;

    /* Our shading model--Gouraud (smooth). */
    glShadeModel( GL_SMOOTH );

    /* Culling. */
    glCullFace( GL_BACK );
    glFrontFace( GL_CCW );
    glEnable( GL_CULL_FACE );

    /* Set the clear color. */
    glClearColor( 0, 0, 0, 0 );

    /* Setup our viewport. */
    glViewport( 0, 0, width, height );

    /*
     * Change to the projection matrix and set
     * our viewing volume.
     */
    glMatrixMode( GL_PROJECTION );
    glLoadIdentity( );
    /*
     * EXERCISE:
     * Replace this with a call to glFrustum.
     */
    gluPerspective( 60.0, ratio, 1.0, 1024.0 );
}

int main( int argc, char* argv[] )
{
    /* Information about the current video settings. */
    const SDL_VideoInfo* info = NULL;
    /* Dimensions of our window. */
    int width = 0;
    int height = 0;
    /* Color depth in bits of our window. */
    int bpp = 0;
    /* Flags we will pass into SDL_SetVideoMode. */
    int flags = 0;

    /* First, initialize SDL's video subsystem. */
    if( SDL_Init( SDL_INIT_VIDEO ) &#60; 0 ) {
        /* Failed, exit. */
        fprintf( stderr, "Video initialization failed: %s\n",
             SDL_GetError( ) );
        quit_tutorial( 1 );
    }

    /* Let's get some video information. */
    info = SDL_GetVideoInfo( );

    if( !info ) {
        /* This should probably never happen. */
        fprintf( stderr, "Video query failed: %s\n",
             SDL_GetError( ) );
        quit_tutorial( 1 );
    }

    /*
     * Set our width/height to 640/480 (you would
     * of course let the user decide this in a normal
     * app). We get the bpp we will request from
     * the display. On X11, VidMode can't change
     * resolution, so this is probably being overly
     * safe. Under Win32, ChangeDisplaySettings
     * can change the bpp.
     */
    width = 640;
    height = 480;
    bpp = info-&#62;vfmt-&#62;BitsPerPixel;

    /*
     * Now, we want to setup our requested
     * window attributes for our OpenGL window.
     * We want *at least* 5 bits of red, green
     * and blue. We also want at least a 16-bit
     * depth buffer.
     *
     * The last thing we do is request a double
     * buffered window. '1' turns on double
     * buffering, '0' turns it off.
     *
     * Note that we do not use SDL_DOUBLEBUF in
     * the flags to SDL_SetVideoMode. That does
     * not affect the GL attribute state, only
     * the standard 2D blitting setup.
     */
    SDL_GL_SetAttribute( SDL_GL_RED_SIZE, 5 );
    SDL_GL_SetAttribute( SDL_GL_GREEN_SIZE, 5 );
    SDL_GL_SetAttribute( SDL_GL_BLUE_SIZE, 5 );
    SDL_GL_SetAttribute( SDL_GL_DEPTH_SIZE, 16 );
    SDL_GL_SetAttribute( SDL_GL_DOUBLEBUFFER, 1 );

    /*
     * We want to request that SDL provide us
     * with an OpenGL window, in a fullscreen
     * video mode.
     *
     * EXERCISE:
     * Make starting windowed an option, and
     * handle the resize events properly with
     * glViewport.
     */
    flags = SDL_OPENGL | SDL_FULLSCREEN;

    /*
     * Set the video mode
     */
    if( SDL_SetVideoMode( width, height, bpp, flags ) == 0 ) {
        /* 
         * This could happen for a variety of reasons,
         * including DISPLAY not being set, the specified
         * resolution not being available, etc.
         */
        fprintf( stderr, "Video mode set failed: %s\n",
             SDL_GetError( ) );
        quit_tutorial( 1 );
    }

    /*
     * At this point, we should have a properly setup
     * double-buffered window for use with OpenGL.
     */
    setup_opengl( width, height );

    /*
     * Now we want to begin our normal app process--
     * an event loop with a lot of redrawing.
     */
    while( 1 ) {
        /* Process incoming events. */
        process_events( );
        /* Draw the screen. */
        draw_screen( );
    }

    /*
     * EXERCISE:
     * Record timings using SDL_GetTicks() and
     * and print out frames per second at program
     * end.
     */

    /* Never reached. */
    return 0;
}</PRE
></DIV
></DIV
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="guidevideo.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="index.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="guideinput.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>Graphics and Video</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="guidevideo.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>Input handling</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>