import time
from devices import Device, registerDevice, STLinkException, Interface
import stlink

# F4 specifics:
STM32_FLASH_BASE = 0x08000000
STM32_SRAM_BASE  = 0x20000000

# flash registers:
FLASH_F4_REGS_ADDR = 0x40023c00
FLASH_F4_KEYR = FLASH_F4_REGS_ADDR + 0x04
FLASH_F4_SR = FLASH_F4_REGS_ADDR + 0x0c
FLASH_F4_CR = FLASH_F4_REGS_ADDR + 0x10

FLASH_F4_CR_START = 16
FLASH_F4_CR_LOCK = 31
FLASH_CR_PG = 0
FLASH_F4_CR_SER = 1
FLASH_CR_MER = 2
FLASH_F4_CR_SNB = 3
FLASH_F4_CR_SNB_MASK = 0x38
FLASH_F4_SR_BSY = 16

class Stm32F4(Device):
   """
      Implementation of the specifics of the STM32F4xx device series.
   """
   def __init__(self, iface):
      super().__init__(iface)
   def __str__(self):
      return 'STM32F4 device size=0x{1:X} id=0x{0:X}'.format(\
         self.UID, self.FlashSize)
   def calculate_F4_sector(self, address):
      sectorstarts = []
      a = STM32_FLASH_BASE
      for sectorsize in self.sectorsizes:
         sectorstarts.append(a)
         a += sectorsize
      # linear search:
      sec = 0
      while sec < len(self.sectorsizes) and address >= sectorstarts[sec]:
         sec += 1
      sec -= 1 # one back.
      return sec, self.sectorsizes[sec]

   def calcSectors(self, address, size):
      off = 0
      sectors = []
      while off < size:
         sectornum, sectorsize = self.calculate_F4_sector(address + off)
         sectors.append((sectornum, sectorsize))
         off += sectorsize
      return sectors
   # Device registers:
   @property
   def UID(self):
      uid_base = 0x1FFF7A10
      uid1 = self.iface.read_debug32(uid_base)
      uid2 = self.iface.read_debug32(uid_base + 0x4)
      uid3 = self.iface.read_debug32(uid_base + 0x8)
      return (uid3 << 64) | (uid2 << 32) | uid1
   @property
   def FlashSize(self):
      f_id = self.iface.read_debug32(0x1FFF7A22)
      f_id = f_id >> 16
      return f_id * 1024
   @property
   def Running(self):
      return self.iface.Status == stlink.CORE_RUNNING
   # flashing commands:
   def writeFlash(self, address, content):
      flashsize = self.FlashSize
      pagesize = min(self.sectorsizes)

      # Check address range:
      if address < STM32_FLASH_BASE:
         raise STLinkException('Flashing below flash start')
      if address + len(content) > STM32_FLASH_BASE + flashsize:
         raise STLinkException('Flashing above flash size')
      if address & 1 == 1:
         raise STLinkException('Unaligned flash')
      if len(content) & 1 == 1:
         print('unaligned length, padding with zero')
         content += bytes([0])
      if address & (pagesize - 1) != 0:
         raise STLinkException('Address not aligned with pagesize')
      # erase required space
      sectors = self.calcSectors(address, len(content))
      print('erasing {0} sectors'.format(len(sectors)))
      for sector, secsize in sectors:
         print('erasing sector {0} of {1} bytes'.format(sector, secsize))
         self.eraseFlashSector(sector)
      # program pages:
      self.unlockFlashIf()
      self.writeFlashCrPsiz(2) # writes are 32 bits aligned
      self.setFlashCrPg()
      print('writing {0} bytes'.format(len(content)), end='')
      offset = 0
      t1 = time.time()
      while offset < len(content):
         size = len(content) - offset
         if size > 0x8000:
            size = 0x8000
         chunk = content[offset:offset + size]
         while len(chunk) % 4 != 0:
            chunk = chunk + bytes([0])
         # Use simple mem32 writes:
         self.iface.write_mem32(address + offset, chunk)
         offset += size
         print('.', end='', flush=True)
      t2 = time.time()
      print('Done!')
      print('Speed: {0} bytes/second'.format(len(content)/(t2-t1)))
      self.lockFlash()
      # verfify program:
      self.verifyFlash(address, content)
   def eraseFlashSector(self, sector):
      self.waitFlashBusy()
      self.unlockFlashIf()
      self.writeFlashCrSnb(sector)
      self.setFlashCrStart()
      self.waitFlashBusy()
      self.lockFlash()
   def eraseFlash(self):
      self.waitFlashBusy()
      self.unlockFlashIf()
      self.setFlashCrMer()
      self.setFlashCrStart()
      self.waitFlashBusy()
      self.clearFlashCrMer()
      self.lockFlash()
   def verifyFlash(self, address, content):
      device_content = self.readFlash(address, len(content))
      ok = content == device_content
      print('Verify:', ok)
   def readFlash(self, address, size):
      print('Reading {1} bytes from 0x{0:X}'.format(address, size), end='')
      offset = 0
      tmp_size = 0x1800
      t1 = time.time()
      image = bytes()
      while offset < size:
         # Correct for last page:
         if offset + tmp_size > size:
            tmp_size = size - offset

         # align size to 4 bytes:
         aligned_size = tmp_size
         while aligned_size % 4 != 0:
            aligned_size += 1

         mem = self.iface.read_mem32(address + offset, aligned_size)
         image += mem[:tmp_size]

         # indicate progress:
         print('.', end='', flush=True)

         # increase for next piece:
         offset += tmp_size
      t2 = time.time()
      assert size == len(image)
      print('Done!')
      print('Speed: {0} bytes/second'.format(size/(t2-t1)))
      return image

   def waitFlashBusy(self):
      """ block until flash operation completes. """
      while self.isFlashBusy():
         pass
   def isFlashLocked(self):
      cr = self.readFlashCr()
      mask = 1 << FLASH_F4_CR_LOCK
      return cr & mask == mask
   def unlockFlashIf(self):
      FLASH_KEY1, FLASH_KEY2 = 0x45670123, 0xcdef89ab
      if self.isFlashLocked():
         self.iface.write_debug32(FLASH_F4_KEYR, FLASH_KEY1)
         self.iface.write_debug32(FLASH_F4_KEYR, FLASH_KEY2)
         if self.isFlashLocked():
            raise STLinkException('Failed to unlock')
   def lockFlash(self):
      x = self.readFlashCr() | (1 << FLASH_F4_CR_LOCK)
      self.writeFlashCr(x)
   def readFlashSr(self):
      return self.iface.read_debug32(FLASH_F4_SR)
   def readFlashCr(self):
      return self.iface.read_debug32(FLASH_F4_CR)
   def writeFlashCr(self, x):
      self.iface.write_debug32(FLASH_F4_CR, x)
   def writeFlashCrSnb(self, sector):
      x = self.readFlashCr()
      x &= ~FLASH_F4_CR_SNB_MASK
      x |= sector << FLASH_F4_CR_SNB
      x |= 1 << FLASH_F4_CR_SER
      self.writeFlashCr(x)
   def setFlashCrMer(self):
      x = self.readFlashCr()
      x |= 1 << FLASH_CR_MER
      self.writeFlashCr(x)
   def setFlashCrPg(self):
      x = self.readFlashCr()
      x |= 1 << FLASH_CR_PG
      self.writeFlashCr(x)
   def writeFlashCrPsiz(self, n):
      x = self.readFlashCr()
      x &= (0x3 << 8)
      x |= n << 8
      self.writeFlashCr(x)
   def clearFlashCrMer(self):
      x = self.readFlashCr()
      x &= ~(1 << FLASH_CR_MER)
      self.writeFlashCr(x)
   def setFlashCrStart(self):
      x = self.readFlashCr()
      x |= 1 << FLASH_F4_CR_START
      self.writeFlashCr(x)
   def isFlashBusy(self):
      mask = 1 << FLASH_F4_SR_BSY
      sr = self.readFlashSr()
      # Check for error bits:
      errorbits = {}
      errorbits[7] = 'Programming sequence error'
      errorbits[6] = 'Programming parallelism error'
      errorbits[5] = 'Programming alignment error'
      errorbits[4] = 'Write protection error'
      errorbits[1] = 'Operation error'
      #errorbits[0] = 'End of operation'
      for bit, msg in errorbits.items():
         if sr & (1 << bit) == (1 << bit):
            raise STLinkException(msg)
      return sr & mask == mask

@registerDevice(0x10016413)
class Stm32F40x(Stm32F4):
   """ STM32F40x and STM32F41x device series """
   def __init__(self, iface):
      super().__init__(iface)
      # Assert the proper size for this device:
      assert self.FlashSize == 0x100000
      """
         from 0x8000000 to 0x80FFFFF
         4 sectors of 0x4000 (16 kB)
         1 sector of 0x10000 (64 kB)
         7 of 0x20000 (128 kB)
      """
      self.sectorsizes = [0x4000] * 4 + [0x10000] + [0x20000] * 7