--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/python/libs/compiler/assembler.py	Sun Oct 07 17:04:10 2012 +0200
@@ -0,0 +1,354 @@
+"""
+ Assembler code generation functions
+"""
+
+from .errors import Error
+
+modrm = {'rax': 0, 'rbx': 1}
+
+# Table 3.1 of the intel manual:
+# use REX.W on the table below:
+regs64 = {'rax': 0,'rcx':1,'rdx':2,'rbx':3,'rsp':4,'rbp':5,'rsi':6,'rdi':7,'r8':0,'r9':1,'r10':2,'r11':3,'r12':4,'r13':5,'r14':6,'r15':7}
+regs32 = {'eax': 0, 'ecx':1, 'edx':2, 'ebx': 3, 'esp': 4, 'ebp': 5, 'esi':6, 'edi':7}
+regs8 = {'al':0,'cl':1,'dl':2,'bl':3,'ah':4,'ch':5,'dh':6,'bh':7}
+
+# Calculation of the rexb bit:
+rexbit = {'rax': 0, 'rcx':0, 'rdx':0, 'rbx': 0, 'rsp': 0, 'rbp': 0, 'rsi':0, 'rdi':0,'r8':1,'r9':1,'r10':1,'r11':1,'r12':1,'r13':1,'r14':1,'r15':1}
+
+# Helper functions:
+def imm64(x):
+   """ represent 64 bits integer in little endian 8 bytes"""
+   if x < 0:
+      x = x + (1 << 64)
+   x = x & 0xFFFFFFFFFFFFFFFF
+   return [ (x >> (p*8)) & 0xFF for p in range(8) ]
+
+def imm32(x):
+   """ represent 32 bits integer in little endian 4 bytes"""
+   if x < 0:
+      x = x + (1 << 32)
+   x = x & 0xFFFFFFFF
+   return [ (x >> (p*8)) & 0xFF for p in range(4) ]
+
+def imm8(x):
+   if x < 0:
+      x = x + (1 << 8)
+   x = x & 0xFF
+   return [ x ]
+
+def modrm(mod=0, rm=0, reg=0):
+   """ Construct the modrm byte from its components """
+   assert(mod <= 3)
+   assert(rm <= 7)
+   assert(reg <= 7)
+   return (mod << 6) | (reg << 3) | rm
+
+def rex(w=0, r=0, x=0, b=0):
+   """ Create a REX prefix byte """
+   assert(w <= 1)
+   assert(r <= 1)
+   assert(x <= 1)
+   assert(b <= 1)
+   return 0x40 | (w<<3) | (r<<2) | (x<<1) | b
+
+def sib(ss=0, index=0, base=0):
+   assert(ss <= 3)
+   assert(index <= 7)
+   assert(base <= 7)
+   return (ss << 6) | (index << 3) | base
+
+tttn = {'L':0xc,'G':0xf,'NE':0x5,'GE':0xd,'LE':0xe, 'E':0x4}
+
+# Actual instructions:
+def nearjump(distance, condition=None):
+   """ jmp imm32 """
+   lim = (1<<30)
+   if abs(distance) > lim:
+      Error('near jump cannot jump over more than {0} bytes'.format(lim))
+   if condition:
+      if distance < 0:
+         distance -= 6 # Skip own instruction
+      opcode = 0x80 | tttn[condition] # Jcc imm32
+      return [0x0F, opcode] + imm32(distance)
+   else:
+      if distance < 0:
+         distance -= 5 # Skip own instruction
+      return [ 0xE9 ] + imm32(distance)
+
+def shortjump(distance, condition=None):
+   """ jmp imm8 """
+   lim = 118
+   if abs(distance) > lim:
+      Error('short jump cannot jump over more than {0} bytes'.format(lim))
+   if distance < 0:
+      distance -= 2 # Skip own instruction
+   if condition:
+      opcode = 0x70 | tttn[condition] # Jcc rel8
+   else:
+      opcode = 0xeb # jmp rel8
+   return [opcode] + imm8(distance)
+
+# Helper that determines jump type:
+def reljump(distance):
+   if abs(distance) < 110:
+      return shortjump(distance)
+   else:
+      return nearjump(distance)
+
+def push(reg):
+   if reg in regs64:
+      if rexbit[reg] == 1:
+         return [0x41, 0x50 + regs64[reg]]
+      else:
+         return [0x50 + regs64[reg]]
+   else:
+      Error('push for {0} not implemented'.format(reg))
+
+def pop(reg):
+   if reg in regs64:
+      if rexbit[reg] == 1:
+         rexprefix = rex(b=1)
+         opcode = 0x58 + regs64[reg]
+         return [rexprefix, opcode]
+      else:
+         opcode = 0x58 + regs64[reg]
+         return [ opcode ]
+   else:
+      Error('pop for {0} not implemented'.format(reg))
+
+def INT(number):
+   opcode = 0xcd
+   return [opcode] + imm8(number)
+
+def syscall():
+   return [0x0F, 0x05]
+
+def call(distance):
+   if type(distance) is int:
+      return [0xe8]+imm32(distance)
+   elif type(distance) is str and distance in regs64:
+      reg = distance
+      opcode = 0xFF # 0xFF /2 == call r/m64
+      mod_rm = modrm(mod=3, reg=2, rm=regs64[reg])
+      if rexbit[reg] == 1:
+         rexprefix = rex(b=rexbit[reg])
+         return [rexprefix, opcode, mod_rm]
+      else:
+         return [opcode, mod_rm]
+   else:
+      Error('Cannot call to {0}'.format(distance))
+
+def ret():
+   return [ 0xc3 ]
+
+def increg64(reg):
+   assert(reg in regs64)
+   rexprefix = rex(w=1, b=rexbit[reg])
+   opcode = 0xff
+   mod_rm = modrm(mod=3, rm=regs64[reg])
+   return [rexprefix, opcode, mod_rm]
+
+def prepost8(r8, rm8):
+   assert(r8 in regs8)
+   pre = []
+   if type(rm8) is list:
+      # TODO: merge mem access with prepost for 64 bits
+      if len(rm8) == 1:
+         base, = rm8
+         if type(base) is str and base in regs64:
+            assert(not base in ['rbp', 'rsp', 'r12', 'r13'])
+            mod_rm = modrm(mod=0, rm=regs64[base], reg=regs8[r8])
+            if rexbit[base] == 1:
+               pre.append(rex(b=1))
+            post = [mod_rm]
+         else:
+            Error('One arg of type {0} not implemented'.format(base))
+      elif len(rm8) == 2:
+         base, offset = rm8
+         assert(type(offset) is int)
+         assert(base in regs64)
+
+         if base == 'rsp' or base == 'r12':
+            Error('Cannot use rsp or r12 as base yet')
+         if rexbit[base] == 1:
+            pre.append( rex(b=1) )
+         mod_rm = modrm(mod=1, rm=regs64[base], reg=regs8[r8])
+         post = [mod_rm] + imm8(offset)
+      else:
+         Error('not supporting prepost8 with list len {0}'.format(len(rm8)))
+   else:
+      Error('Not supporting move with reg8 {0}'.format(r8))
+   return pre, post
+
+def prepost(r64, rm64):
+   assert(r64 in regs64)
+   if type(rm64) is list:
+      if len(rm64) == 3:
+            base, index, disp = rm64
+            assert(base in regs64)
+            assert(index in regs64)
+            assert(type(disp) is int)
+            # Assert that no special cases are used:
+            # TODO: swap base and index to avoid special cases
+            # TODO: exploit special cases and make better code
+            assert(index != 'rsp')
+
+            rexprefix = rex(w=1, r=rexbit[r64], x=rexbit[index], b=rexbit[base])
+            # mod=1 and rm=4 indicates a SIB byte: [--][--]+imm8
+            mod_rm = modrm(mod=1, rm=4, reg=regs64[r64])
+            si_b = sib(ss=0, index=regs64[index], base=regs64[base])
+            return [rexprefix], [mod_rm, si_b] + imm8(disp)
+      elif len(rm64) == 2:
+         base, offset = rm64
+         assert(type(offset) is int)
+         if base == 'RIP':
+            # RIP pointer relative addressing mode!
+            rexprefix = rex(w=1, r=rexbit[r64])
+            mod_rm = modrm(mod=0, rm=5, reg=regs64[r64])
+            return [rexprefix], [mod_rm] + imm32(offset)
+         else:
+            assert(base in regs64)
+
+            if base == 'rsp' or base == 'r12':
+               # extended function that uses SIB byte
+               rexprefix = rex(w=1, r=rexbit[r64], b=rexbit[base])
+               # rm=4 indicates a SIB byte follows
+               mod_rm = modrm(mod=1, rm=4, reg=regs64[r64])
+               # index=4 indicates that index is not used
+               si_b = sib(ss=0, index=4, base=regs64[base])
+               return [rexprefix], [mod_rm, si_b] + imm8(offset)
+            else:
+               rexprefix = rex(w=1, r=rexbit[r64], b=rexbit[base])
+               mod_rm = modrm(mod=1, rm=regs64[base], reg=regs64[r64])
+               return [rexprefix], [mod_rm] + imm8(offset)
+      elif len(rm64) == 1:
+         offset = rm64[0]
+         if type(offset) is int:
+            rexprefix = rex(w=1, r=rexbit[r64])
+            mod_rm = modrm(mod=0, rm=4,reg=regs64[r64])
+            si_b = sib(ss=0, index=4,base=5) # 0x25
+            return [rexprefix], [mod_rm, si_b] + imm32(offset)
+         else:
+            Error('Memory reference of type {0} not implemented'.format(offset))
+      else:
+         Error('Memory reference not implemented')
+   elif rm64 in regs64:
+      rexprefix = rex(w=1, r=rexbit[r64], b=rexbit[rm64])
+      mod_rm = modrm(3, rm=regs64[rm64], reg=regs64[r64])
+      return [rexprefix], [mod_rm]
+
+def leareg64(rega, m):
+   opcode = 0x8d # lea r64, m
+   pre, post = prepost(rega, m)
+   return pre + [opcode] + post
+
+def mov(rega, regb):
+   if type(regb) is int:
+      pre = [rex(w=1, b=rexbit[rega])]
+      opcode = 0xb8 + regs64[rega]
+      post = imm64(regb)
+   elif type(regb) is str:
+      if regb in regs64:
+         opcode = 0x89 # mov r/m64, r64
+         pre, post = prepost(regb, rega)
+      elif regb in regs8:
+         opcode = 0x88 # mov r/m8, r8
+         pre, post = prepost8(regb, rega)
+      else:
+         Error('Unknown register {0}'.format(regb))
+   elif type(rega) is str:
+      if rega in regs64:
+         opcode = 0x8b # mov r64, r/m64
+         pre, post = prepost(rega, regb)
+      else:
+         Error('Unknown register {0}'.format(rega))
+   else:
+      Error('Move of this kind {0}, {1} not implemented'.format(rega, regb))
+   return pre + [opcode] + post
+
+def xorreg64(rega, regb):
+   rexprefix = rex(w=1, r=rexbit[regb], b=rexbit[rega])
+   opcode = 0x31 # XOR r/m64, r64
+   # Alternative is 0x33 XOR r64, r/m64
+   mod_rm = modrm(3, rm=regs64[rega], reg=regs64[regb])
+   return [rexprefix, opcode, mod_rm]
+
+# integer arithmatic:
+def addreg64(rega, regb):
+   if regb in regs64:
+      pre, post = prepost(regb, rega)
+      opcode = 0x01 # ADD r/m64, r64
+      return pre + [opcode] + post
+   elif type(regb) is int:
+      if regb < 100:
+         rexprefix = rex(w=1, b=rexbit[rega])
+         opcode = 0x83 # add r/m, imm8
+         mod_rm = modrm(3, rm=regs64[rega], reg=0)
+         return [rexprefix, opcode, mod_rm]+imm8(regb)
+      elif regb < (1<<31):
+         rexprefix = rex(w=1, b=rexbit[rega])
+         opcode = 0x81 # add r/m64, imm32
+         mod_rm = modrm(3, rm=regs64[rega], reg=0)
+         return [rexprefix, opcode, mod_rm]+imm32(regb)
+      else:
+         Error('Constant value too large!')
+   else:
+      Error('unknown second operand!'.format(regb))
+
+def subreg64(rega, regb):
+   if regb in regs64:
+      pre, post = prepost(regb, rega)
+      opcode = 0x29 # SUB r/m64, r64
+      return pre + [opcode] + post
+   elif type(regb) is int:
+      if regb < 100:
+         rexprefix = rex(w=1, b=rexbit[rega])
+         opcode = 0x83 # sub r/m, imm8
+         mod_rm = modrm(3, rm=regs64[rega], reg=5)
+         return [rexprefix, opcode, mod_rm]+imm8(regb)
+      elif regb < (1<<31):
+         rexprefix = rex(w=1, b=rexbit[rega])
+         opcode = 0x81 # sub r/m64, imm32
+         mod_rm = modrm(3, rm=regs64[rega], reg=5)
+         return [rexprefix, opcode, mod_rm]+imm32(regb)
+      else:
+         Error('Constant value too large!')
+
+   else:
+      Error('unknown second operand!'.format(regb))
+
+def idivreg64(reg):
+   rexprefix = rex(w=1, b=rexbit[reg])
+   opcode = 0xf7 # IDIV r/m64
+   mod_rm = modrm(3, rm=regs64[reg], reg=7)
+   return [rexprefix, opcode, mod_rm]
+
+def imulreg64_rax(reg):
+   rexprefix = rex(w=1, b=rexbit[reg])
+   opcode = 0xf7 # IMUL r/m64
+   mod_rm = modrm(3, rm=regs64[reg], reg=5)
+   return [rexprefix, opcode, mod_rm]
+
+def imulreg64(rega, regb):
+   pre, post = prepost(rega, regb)
+   opcode = 0x0f # IMUL r64, r/m64
+   opcode2 = 0xaf
+   return pre + [opcode, opcode2] + post
+
+def cmpreg64(rega, regb):
+   if regb in regs64:
+      pre, post = prepost(regb, rega)
+      opcode = 0x39 # CMP r/m64, r64
+      return pre + [opcode] + post
+   elif type(regb) is int:
+      rexprefix = rex(w=1, b=rexbit[rega])
+      opcode = 0x83 # CMP r/m64, imm8
+      mod_rm = modrm(3, rm=regs64[rega], reg=7)
+      return [rexprefix, opcode, mod_rm] + imm8(regb)
+      
+   else:
+      Error('not implemented cmp64')
+
+# Mapping that maps string names to the right functions:
+opcodes = {'mov':(mov,2), 'lea':(leareg64,2), 'int':(INT,1), 'syscall':(syscall,0)}
+