# HG changeset patch # User Ryan C. Gordon # Date 1001443912 0 # Node ID c714c9cd10f6d0a546150dd4bc2fee16577dc7f4 # Parent 73484e54d05ef6b1035f53cc0a9f93b382e158f0 Doh...that shouldn't be there. diff -r 73484e54d05e -r c714c9cd10f6 aclocal.m4 --- a/aclocal.m4 Tue Sep 25 16:49:40 2001 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1601 +0,0 @@ -# aclocal.m4 generated automatically by aclocal 1.5 - -# Copyright 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# Do all the work for Automake. This macro actually does too much -- -# some checks are only needed if your package does certain things. -# But this isn't really a big deal. - -# serial 5 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# We require 2.13 because we rely on SHELL being computed by configure. -AC_PREREQ([2.13]) - -# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) -# ----------------------------------------------------------- -# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. -# The purpose of this macro is to provide the user with a means to -# check macros which are provided without letting her know how the -# information is coded. -# If this macro is not defined by Autoconf, define it here. -ifdef([AC_PROVIDE_IFELSE], - [], - [define([AC_PROVIDE_IFELSE], - [ifdef([AC_PROVIDE_$1], - [$2], [$3])])]) - - -# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) -# ---------------------------------------------- -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first]) -fi - -# Define the identity of the package. -PACKAGE=$1 -AC_SUBST(PACKAGE)dnl -VERSION=$2 -AC_SUBST(VERSION)dnl -ifelse([$3],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) -AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) - -# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow -# the ones we care about. -ifdef([m4_pattern_allow], - [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl - -# Autoconf 2.50 always computes EXEEXT. However we need to be -# compatible with 2.13, for now. So we always define EXEEXT, but we -# don't compute it. -AC_SUBST(EXEEXT) -# Similar for OBJEXT -- only we only use OBJEXT if the user actually -# requests that it be used. This is a bit dumb. -: ${OBJEXT=o} -AC_SUBST(OBJEXT) - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl -AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_PROVIDE_IFELSE([AC_PROG_][CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_][CC], - defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_][CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_][CXX], - defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) - -# -# Check to make sure that the build environment is sane. -# - -# serial 3 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - - -# serial 2 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - am_backtick='`' - AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) -fi -]) - -# AM_AUX_DIR_EXPAND - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], [ -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# serial 4 -*- Autoconf -*- - - - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - - -# _AM_DEPENDENCIES(NAME) -# --------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX" or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - echo '#include "conftest.h"' > conftest.c - echo 'int i;' > conftest.h - echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=conftest.c object=conftest.o \ - depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && - grep conftest.h conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type" -AC_SUBST([$1DEPMODE]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null -AC_SUBST(DEPDIR) -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking Speeds up one-time builds - --enable-dependency-tracking Do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -pushdef([subst], defn([AC_SUBST])) -subst(AMDEPBACKSLASH) -popdef([subst]) -]) - -# Generate code to set up dependency tracking. -# This macro should only be invoked once -- use via AC_REQUIRE. -# Usage: -# AM_OUTPUT_DEPENDENCY_COMMANDS - -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ -AC_OUTPUT_COMMANDS([ -test x"$AMDEP_TRUE" != x"" || -for mf in $CONFIG_FILES; do - case "$mf" in - Makefile) dirpart=.;; - */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; - *) continue;; - esac - grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. - DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` - test -z "$DEPDIR" && continue - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n -e '/^U = / s///p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n -e ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`echo "$file" | sed -e 's|/[^/]*$||'` - $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -], [AMDEP_TRUE="$AMDEP_TRUE" -ac_aux_dir="$ac_aux_dir"])]) - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -doit: - @echo done -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include='#' -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote='"' - _am_result=BSD - fi -fi -AC_SUBST(am__include) -AC_SUBST(am__quote) -AC_MSG_RESULT($_am_result) -rm -f confinc confmf -]) - -# serial 3 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -# -# FIXME: Once using 2.50, use this: -# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_DEFUN([AM_CONDITIONAL], -[ifelse([$1], [TRUE], - [errprint(__file__:__line__: [$0: invalid condition: $1 -])dnl -m4exit(1)])dnl -ifelse([$1], [FALSE], - [errprint(__file__:__line__: [$0: invalid condition: $1 -])dnl -m4exit(1)])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi]) - - -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE - -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log -]) - -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl -AC_REQUIRE([AC_ENABLE_SHARED])dnl -AC_REQUIRE([AC_ENABLE_STATIC])dnl -AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_LD])dnl -AC_REQUIRE([AC_PROG_NM])dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -dnl - -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$lt_target" in -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; - -ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -]) -esac -]) - -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) - -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) - -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) - -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl -]) - -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) - - -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl -]) - -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) - -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_PROG_LD_GNU -]) - -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi]) -]) - -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -]) - -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) - -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; - esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) -]) - -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) - else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= - fi -]) - -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl - -# Configure paths for SDL -# Sam Lantinga 9/21/99 -# stolen from Manish Singh -# stolen back from Frank Belew -# stolen from Manish Singh -# Shamelessly stolen from Owen Taylor - -dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) -dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS -dnl -AC_DEFUN(AM_PATH_SDL, -[dnl -dnl Get the cflags and libraries from the sdl-config script -dnl -AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], - sdl_prefix="$withval", sdl_prefix="") -AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], - sdl_exec_prefix="$withval", sdl_exec_prefix="") -AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], - , enable_sdltest=yes) - - if test x$sdl_exec_prefix != x ; then - sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix" - if test x${SDL_CONFIG+set} != xset ; then - SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config - fi - fi - if test x$sdl_prefix != x ; then - sdl_args="$sdl_args --prefix=$sdl_prefix" - if test x${SDL_CONFIG+set} != xset ; then - SDL_CONFIG=$sdl_prefix/bin/sdl-config - fi - fi - - AC_REQUIRE([AC_CANONICAL_TARGET]) - AC_PATH_PROG(SDL_CONFIG, sdl-config, no) - min_sdl_version=ifelse([$1], ,0.11.0,$1) - AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) - no_sdl="" - if test "$SDL_CONFIG" = "no" ; then - no_sdl=yes - else - SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags` - SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs` - - sdl_major_version=`$SDL_CONFIG $sdl_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_sdltest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $SDL_CFLAGS" - LIBS="$LIBS $SDL_LIBS" -dnl -dnl Now check if the installed SDL is sufficiently new. (Also sanity -dnl checks the results of sdl-config to some extent -dnl - rm -f conf.sdltest - case "$target" in - *-*-darwin*) - cp -r `$SDL_CONFIG --nib` . - dnl create an Info.plist file, unless one exists - if test -f Info.plist ; then - : - else - cp `$SDL_CONFIG --plist` . - fi - ;; - esac - AC_TRY_RUN([ -#include -#include -#include -#include "SDL.h" - -char* -my_strdup (char *str) -{ - char *new_str; - - if (str) - { - new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); - strcpy (new_str, str); - } - else - new_str = NULL; - - return new_str; -} - -int main (int argc, char *argv[]) -{ - int major, minor, micro; - char *tmp_version; - - /* This hangs on some systems (?) - system ("touch conf.sdltest"); - */ - { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = my_strdup("$min_sdl_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_sdl_version"); - exit(1); - } - - if (($sdl_major_version > major) || - (($sdl_major_version == major) && ($sdl_minor_version > minor)) || - (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); - printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro); - printf("*** best to upgrade to the required version.\n"); - printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n"); - printf("*** to point to the correct copy of sdl-config, and remove the file\n"); - printf("*** config.cache before re-running configure\n"); - return 1; - } -} - -],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_sdl" = x ; then - AC_MSG_RESULT(yes) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$SDL_CONFIG" = "no" ; then - echo "*** The sdl-config script installed by SDL could not be found" - echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the SDL_CONFIG environment variable to the" - echo "*** full path to sdl-config." - else - if test -f conf.sdltest ; then - : - else - echo "*** Could not run SDL test program, checking why..." - CFLAGS="$CFLAGS $SDL_CFLAGS" - LIBS="$LIBS $SDL_LIBS" - AC_TRY_LINK([ -#include -#include "SDL.h" - -int main(int argc, char *argv[]) -{ return 0; } -#undef main -#define main K_and_R_C_main -], [ return 0; ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding SDL or finding the wrong" - echo "*** version of SDL. If it is not finding SDL, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means SDL was incorrectly installed" - echo "*** or that you have moved SDL since it was installed. In the latter case, you" - echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - SDL_CFLAGS="" - SDL_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(SDL_CFLAGS) - AC_SUBST(SDL_LIBS) - case "$target" in - *-*-darwin*) - SDL_APPLE_CREATOR="????" - AC_SUBST(SDL_APPLE_CREATOR) - ;; - esac - rm -f conf.sdltest -]) - -# Configure paths for libmikmod -# -# Derived from glib.m4 (Owen Taylor 97-11-3) -# Improved by Chris Butler -# - -dnl AM_PATH_LIBMIKMOD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]]) -dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and -dnl LIBMIKMOD_LDADD -dnl -AC_DEFUN(AM_PATH_LIBMIKMOD, -[dnl -dnl Get the cflags and libraries from the libmikmod-config script -dnl -AC_ARG_WITH(libmikmod-prefix,[ --with-libmikmod-prefix=PFX Prefix where libmikmod is installed (optional)], - libmikmod_config_prefix="$withval", libmikmod_config_prefix="") -AC_ARG_WITH(libmikmod-exec-prefix,[ --with-libmikmod-exec-prefix=PFX Exec prefix where libmikmod is installed (optional)], - libmikmod_config_exec_prefix="$withval", libmikmod_config_exec_prefix="") -AC_ARG_ENABLE(libmikmodtest, [ --disable-libmikmodtest Do not try to compile and run a test libmikmod program], - , enable_libmikmodtest=yes) - - if test x$libmikmod_config_exec_prefix != x ; then - libmikmod_config_args="$libmikmod_config_args --exec-prefix=$libmikmod_config_exec_prefix" - if test x${LIBMIKMOD_CONFIG+set} != xset ; then - LIBMIKMOD_CONFIG=$libmikmod_config_exec_prefix/bin/libmikmod-config - fi - fi - if test x$libmikmod_config_prefix != x ; then - libmikmod_config_args="$libmikmod_config_args --prefix=$libmikmod_config_prefix" - if test x${LIBMIKMOD_CONFIG+set} != xset ; then - LIBMIKMOD_CONFIG=$libmikmod_config_prefix/bin/libmikmod-config - fi - fi - - AC_PATH_PROG(LIBMIKMOD_CONFIG, libmikmod-config, no) - min_libmikmod_version=ifelse([$1], ,3.1.5,$1) - AC_MSG_CHECKING(for libmikmod - version >= $min_libmikmod_version) - no_libmikmod="" - if test "$LIBMIKMOD_CONFIG" = "no" ; then - no_libmikmod=yes - else - LIBMIKMOD_CFLAGS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --cflags` - LIBMIKMOD_LIBS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --libs` - LIBMIKMOD_LDADD=`$LIBMIKMOD_CONFIG $libmikmod_config_args --ldadd` - libmikmod_config_major_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'` - libmikmod_config_minor_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'` - libmikmod_config_micro_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'` - if test "x$enable_libmikmodtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - AC_LANG_SAVE - AC_LANG_C - CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS $LIBMIKMOD_LDADD" - LIBS="$LIBMIKMOD_LIBS $LIBS" -dnl -dnl Now check if the installed libmikmod is sufficiently new. (Also sanity -dnl checks the results of libmikmod-config to some extent -dnl - rm -f conf.mikmodtest - AC_TRY_RUN([ -#include -#include -#include - -char* my_strdup (char *str) -{ - char *new_str; - - if (str) { - new_str = malloc ((strlen (str) + 1) * sizeof(char)); - strcpy (new_str, str); - } else - new_str = NULL; - - return new_str; -} - -int main() -{ - int major,minor,micro; - int libmikmod_major_version,libmikmod_minor_version,libmikmod_micro_version; - char *tmp_version; - - system("touch conf.mikmodtest"); - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = my_strdup("$min_libmikmod_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_libmikmod_version"); - exit(1); - } - - libmikmod_major_version=(MikMod_GetVersion() >> 16) & 255; - libmikmod_minor_version=(MikMod_GetVersion() >> 8) & 255; - libmikmod_micro_version=(MikMod_GetVersion() ) & 255; - - if ((libmikmod_major_version != $libmikmod_config_major_version) || - (libmikmod_minor_version != $libmikmod_config_minor_version) || - (libmikmod_micro_version != $libmikmod_config_micro_version)) - { - printf("\n*** 'libmikmod-config --version' returned %d.%d.%d, but libmikmod (%d.%d.%d)\n", - $libmikmod_config_major_version, $libmikmod_config_minor_version, $libmikmod_config_micro_version, - libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); - printf ("*** was found! If libmikmod-config was correct, then it is best\n"); - printf ("*** to remove the old version of libmikmod. You may also be able to fix the error\n"); - printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); - printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); - printf("*** required on your system.\n"); - printf("*** If libmikmod-config was wrong, set the environment variable LIBMIKMOD_CONFIG\n"); - printf("*** to point to the correct copy of libmikmod-config, and remove the file config.cache\n"); - printf("*** before re-running configure\n"); - } - else if ((libmikmod_major_version != LIBMIKMOD_VERSION_MAJOR) || - (libmikmod_minor_version != LIBMIKMOD_VERSION_MINOR) || - (libmikmod_micro_version != LIBMIKMOD_REVISION)) - { - printf("*** libmikmod header files (version %d.%d.%d) do not match\n", - LIBMIKMOD_VERSION_MAJOR, LIBMIKMOD_VERSION_MINOR, LIBMIKMOD_REVISION); - printf("*** library (version %d.%d.%d)\n", - libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); - } - else - { - if ((libmikmod_major_version > major) || - ((libmikmod_major_version == major) && (libmikmod_minor_version > minor)) || - ((libmikmod_major_version == major) && (libmikmod_minor_version == minor) && (libmikmod_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** An old version of libmikmod (%d.%d.%d) was found.\n", - libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); - printf("*** You need a version of libmikmod newer than %d.%d.%d.\n", - major, minor, micro); - printf("***\n"); - printf("*** If you have already installed a sufficiently new version, this error\n"); - printf("*** probably means that the wrong copy of the libmikmod-config shell script is\n"); - printf("*** being found. The easiest way to fix this is to remove the old version\n"); - printf("*** of libmikmod, but you can also set the LIBMIKMOD_CONFIG environment to point to the\n"); - printf("*** correct copy of libmikmod-config. (In this case, you will have to\n"); - printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); - printf("*** so that the correct libraries are found at run-time))\n"); - } - } - return 1; -} -],, no_libmikmod=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - AC_LANG_RESTORE - fi - fi - if test "x$no_libmikmod" = x ; then - AC_MSG_RESULT([yes, `$LIBMIKMOD_CONFIG --version`]) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$LIBMIKMOD_CONFIG" = "no" ; then - echo "*** The libmikmod-config script installed by libmikmod could not be found" - echo "*** If libmikmod was installed in PREFIX, make sure PREFIX/bin is in" - echo "*** your path, or set the LIBMIKMOD_CONFIG environment variable to the" - echo "*** full path to libmikmod-config." - else - if test -f conf.mikmodtest ; then - : - else - echo "*** Could not run libmikmod test program, checking why..." - CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS" - LIBS="$LIBS $LIBMIKMOD_LIBS" - AC_LANG_SAVE - AC_LANG_C - AC_TRY_LINK([ -#include -#include -], [ return (MikMod_GetVersion()!=0); ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding libmikmod or finding the wrong" - echo "*** version of libmikmod. If it is not finding libmikmod, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location. Also, make sure you have run ldconfig if that" - echo "*** is required on your system." - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means libmikmod was incorrectly installed" - echo "*** or that you have moved libmikmod since it was installed. In the latter case, you" - echo "*** may want to edit the libmikmod-config script: $LIBMIKMOD_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - AC_LANG_RESTORE - fi - fi - LIBMIKMOD_CFLAGS="" - LIBMIKMOD_LIBS="" - LIBMIKMOD_LDADD="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(LIBMIKMOD_CFLAGS) - AC_SUBST(LIBMIKMOD_LIBS) - AC_SUBST(LIBMIKMOD_LDADD) - rm -f conf.mikmodtest -]) - -# Configure paths for libvorbis -# Jack Moffitt 10-21-2000 -# Shamelessly stolen from Owen Taylor and Manish Singh - -dnl AM_PATH_VORBIS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) -dnl Test for libvorbis, and define VORBIS_CFLAGS and VORBIS_LIBS -dnl -AC_DEFUN(AM_PATH_VORBIS, -[dnl -dnl Get the cflags and libraries -dnl -AC_ARG_WITH(vorbis-prefix,[ --with-vorbis-prefix=PFX Prefix where libvorbis is installed (optional)], vorbis_prefix="$withval", vorbis_prefix="") -AC_ARG_ENABLE(vorbistest, [ --disable-vorbistest Do not try to compile and run a test Vorbis program],, enable_vorbistest=yes) - - if test "x$vorbis_prefix" != "xNONE" ; then - vorbis_args="$vorbis_args --prefix=$vorbis_prefix" - VORBIS_CFLAGS="-I$vorbis_prefix/include" - VORBIS_LIBDIR="-L$vorbis_prefix/lib" - elif test "$prefix" != ""; then - vorbis_args="$vorbis_args --prefix=$prefix" - VORBIS_CFLAGS="-I$prefix/include" - VORBIS_LIBDIR="-L$prefix/lib" - fi - - VORBIS_LIBS="$VORBIS_LIBDIR -lvorbis -lm" - VORBISFILE_LIBS="-lvorbisfile" - VORBISENC_LIBS="-lvorbisenc" - - AC_MSG_CHECKING(for Vorbis) - no_vorbis="" - - - if test "x$enable_vorbistest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $VORBIS_CFLAGS" - LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS" -dnl -dnl Now check if the installed Vorbis is sufficiently new. -dnl - rm -f conf.vorbistest - AC_TRY_RUN([ -#include -#include -#include -#include - -int main () -{ - system("touch conf.vorbistest"); - return 0; -} - -],, no_vorbis=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - - if test "x$no_vorbis" = "x" ; then - AC_MSG_RESULT(yes) - ifelse([$1], , :, [$1]) - else - AC_MSG_RESULT(no) - if test -f conf.vorbistest ; then - : - else - echo "*** Could not run Vorbis test program, checking why..." - CFLAGS="$CFLAGS $VORBIS_CFLAGS" - LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS" - AC_TRY_LINK([ -#include -#include -], [ return 0; ], - [ echo "*** The test program compiled, but did not run. This usually means" - echo "*** that the run-time linker is not finding Vorbis or finding the wrong" - echo "*** version of Vorbis. If it is not finding Vorbis, you'll need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to remove it, although" - echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the file config.log for the" - echo "*** exact error that occured. This usually means Vorbis was incorrectly installed" - echo "*** or that you have moved Vorbis since it was installed." ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - VORBIS_CFLAGS="" - VORBIS_LIBS="" - VORBISFILE_LIBS="" - VORBISENC_LIBS="" - ifelse([$2], , :, [$2]) - fi - AC_SUBST(VORBIS_CFLAGS) - AC_SUBST(VORBIS_LIBS) - AC_SUBST(VORBISFILE_LIBS) - AC_SUBST(VORBISENC_LIBS) - rm -f conf.vorbistest -]) - -# Configure paths for SMPEG -# Nicolas Vignal 11/19/2000 -# stolen from Sam Lantinga -# stolen from Manish Singh -# stolen back from Frank Belew -# stolen from Manish Singh -# Shamelessly stolen from Owen Taylor - -dnl AM_PATH_SMPEG([MINIMUM-VERSION, [ACTION-IF-FOUND [, -ACTION-IF-NOT-FOUND]]]) -dnl Test for SMPEG, and define SMPEG_CFLAGS and SMPEG_LIBS -dnl -AC_DEFUN(AM_PATH_SMPEG, -[dnl -dnl Get the cflags and libraries from the smpeg-config script -dnl -AC_ARG_WITH(smpeg-prefix,[ --with-smpeg-prefix=PFX Prefix where SMPEG is -installed (optional)], - smpeg_prefix="$withval", smpeg_prefix="") -AC_ARG_WITH(smpeg-exec-prefix,[ --with-smpeg-exec-prefix=PFX Exec prefix -where SMPEG is installed (optional)], - smpeg_exec_prefix="$withval", smpeg_exec_prefix="") -AC_ARG_ENABLE(smpegtest, [ --disable-smpegtest Do not try to compile -and run a test SMPEG program], - , enable_smpegtest=yes) - - if test x$smpeg_exec_prefix != x ; then - smpeg_args="$smpeg_args --exec-prefix=$smpeg_exec_prefix" - if test x${SMPEG_CONFIG+set} != xset ; then - SMPEG_CONFIG=$smpeg_exec_prefix/bin/smpeg-config - fi - fi - if test x$smpeg_prefix != x ; then - smpeg_args="$smpeg_args --prefix=$smpeg_prefix" - if test x${SMPEG_CONFIG+set} != xset ; then - SMPEG_CONFIG=$smpeg_prefix/bin/smpeg-config - fi - fi - - AC_PATH_PROG(SMPEG_CONFIG, smpeg-config, no) - min_smpeg_version=ifelse([$1], ,0.2.7,$1) - AC_MSG_CHECKING(for SMPEG - version >= $min_smpeg_version) - no_smpeg="" - if test "$SMPEG_CONFIG" = "no" ; then - no_smpeg=yes - else - SMPEG_CFLAGS=`$SMPEG_CONFIG $smpegconf_args --cflags` - SMPEG_LIBS=`$SMPEG_CONFIG $smpegconf_args --libs` - - smpeg_major_version=`$SMPEG_CONFIG $smpeg_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` - smpeg_minor_version=`$SMPEG_CONFIG $smpeg_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` - smpeg_micro_version=`$SMPEG_CONFIG $smpeg_config_args --version | \ - sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` - if test "x$enable_smpegtest" = "xyes" ; then - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS" - LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS" -dnl -dnl Now check if the installed SMPEG is sufficiently new. (Also sanity -dnl checks the results of smpeg-config to some extent -dnl - rm -f conf.smpegtest - AC_TRY_RUN([ -#include -#include -#include -#include "smpeg.h" - -char* -my_strdup (char *str) -{ - char *new_str; - - if (str) - { - new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); - strcpy (new_str, str); - } - else - new_str = NULL; - - return new_str; -} - -int main (int argc, char *argv[]) -{ - int major, minor, micro; - char *tmp_version; - - /* This hangs on some systems (?) - system ("touch conf.smpegtest"); - */ - { FILE *fp = fopen("conf.smpegtest", "a"); if ( fp ) fclose(fp); } - - /* HP/UX 9 (%@#!) writes to sscanf strings */ - tmp_version = my_strdup("$min_smpeg_version"); - if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_smpeg_version"); - exit(1); - } - - if (($smpeg_major_version > major) || - (($smpeg_major_version == major) && ($smpeg_minor_version > minor)) || - (($smpeg_major_version == major) && ($smpeg_minor_version == minor) -&& ($smpeg_micro_version >= micro))) - { - return 0; - } - else - { - printf("\n*** 'smpeg-config --version' returned %d.%d.%d, but the -minimum version\n", $smpeg_major_version, $smpeg_minor_version, -$smpeg_micro_version); - printf("*** of SMPEG required is %d.%d.%d. If smpeg-config is -correct, then it is\n", major, minor, micro); - printf("*** best to upgrade to the required version.\n"); - printf("*** If smpeg-config was wrong, set the environment variable -SMPEG_CONFIG\n"); - printf("*** to point to the correct copy of smpeg-config, and remove -the file\n"); - printf("*** config.cache before re-running configure\n"); - return 1; - } -} - -],, no_smpeg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - if test "x$no_smpeg" = x ; then - AC_MSG_RESULT(yes) - ifelse([$2], , :, [$2]) - else - AC_MSG_RESULT(no) - if test "$SMPEG_CONFIG" = "no" ; then - echo "*** The smpeg-config script installed by SMPEG could not be -found" - echo "*** If SMPEG was installed in PREFIX, make sure PREFIX/bin is -in" - echo "*** your path, or set the SMPEG_CONFIG environment variable to -the" - echo "*** full path to smpeg-config." - else - if test -f conf.smpegtest ; then - : - else - echo "*** Could not run SMPEG test program, checking why..." - CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS" - LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS" - AC_TRY_LINK([ -#include -#include "smpeg.h" -], [ return 0; ], - [ echo "*** The test program compiled, but did not run. This -usually means" - echo "*** that the run-time linker is not finding SMPEG or -finding the wrong" - echo "*** version of SMPEG. If it is not finding SMPEG, you'll -need to set your" - echo "*** LD_LIBRARY_PATH environment variable, or edit -/etc/ld.so.conf to point" - echo "*** to the installed location Also, make sure you have run -ldconfig if that" - echo "*** is required on your system" - echo "***" - echo "*** If you have an old version installed, it is best to -remove it, although" - echo "*** you may also be able to get things to work by modifying -LD_LIBRARY_PATH"], - [ echo "*** The test program failed to compile or link. See the -file config.log for the" - echo "*** exact error that occured. This usually means SMPEG was -incorrectly installed" - echo "*** or that you have moved SMPEG since it was installed. In -the latter case, you" - echo "*** may want to edit the smpeg-config script: -$SMPEG_CONFIG" ]) - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - fi - fi - SMPEG_CFLAGS="" - SMPEG_LIBS="" - ifelse([$3], , :, [$3]) - fi - AC_SUBST(SMPEG_CFLAGS) - AC_SUBST(SMPEG_LIBS) - rm -f conf.smpegtest -]) -