view aclocal.m4 @ 66:54e10585e0cf

Changed AC_INIT() to look for SDL_sound.c, not COPYING, since I'm keeping the filename as LICENSE, and "SDL_sound.c" is less generic.
author Ryan C. Gordon <icculus@icculus.org>
date Tue, 25 Sep 2001 01:30:14 +0000
parents cee26d04d0ca
children
line wrap: on
line source

# aclocal.m4 generated automatically by aclocal 1.5

# Copyright 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Do all the work for Automake.  This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.

# serial 5

# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# We require 2.13 because we rely on SHELL being computed by configure.
AC_PREREQ([2.13])

# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
# -----------------------------------------------------------
# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
# The purpose of this macro is to provide the user with a means to
# check macros which are provided without letting her know how the
# information is coded.
# If this macro is not defined by Autoconf, define it here.
ifdef([AC_PROVIDE_IFELSE],
      [],
      [define([AC_PROVIDE_IFELSE],
              [ifdef([AC_PROVIDE_$1],
                     [$2], [$3])])])


# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
# ----------------------------------------------
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
   test -f $srcdir/config.status; then
  AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
fi

# Define the identity of the package.
PACKAGE=$1
AC_SUBST(PACKAGE)dnl
VERSION=$2
AC_SUBST(VERSION)dnl
ifelse([$3],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])

# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
# the ones we care about.
ifdef([m4_pattern_allow],
      [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl

# Autoconf 2.50 always computes EXEEXT.  However we need to be
# compatible with 2.13, for now.  So we always define EXEEXT, but we
# don't compute it.
AC_SUBST(EXEEXT)
# Similar for OBJEXT -- only we only use OBJEXT if the user actually
# requests that it be used.  This is a bit dumb.
: ${OBJEXT=o}
AC_SUBST(OBJEXT)

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal)
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake)
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_MISSING_PROG(AMTAR, tar)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_PROVIDE_IFELSE([AC_PROG_][CC],
                  [_AM_DEPENDENCIES(CC)],
                  [define([AC_PROG_][CC],
                          defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_][CXX],
                  [_AM_DEPENDENCIES(CXX)],
                  [define([AC_PROG_][CXX],
                          defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])

#
# Check to make sure that the build environment is sane.
#

# serial 3

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
   if test "$[*]" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftest.file`
   fi
   rm -f conftest.file
   if test "$[*]" != "X $srcdir/configure conftest.file" \
      && test "$[*]" != "X conftest.file $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
alias in your environment])
   fi

   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])


# serial 2

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])


# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
  am_missing_run="$MISSING --run "
else
  am_missing_run=
  am_backtick='`'
  AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
fi
])

# AM_AUX_DIR_EXPAND

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND], [
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
])

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])

# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# serial 4						-*- Autoconf -*-



# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...



# _AM_DEPENDENCIES(NAME)
# ---------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX" or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    echo '#include "conftest.h"' > conftest.c
    echo 'int i;' > conftest.h
    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf

    case $depmode in
    nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    none) break ;;
    esac
    # We check with `-c' and `-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.
    if depmode=$depmode \
       source=conftest.c object=conftest.o \
       depfile=conftest.Po tmpdepfile=conftest.TPo \
       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
       grep conftest.h conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      am_cv_$1_dependencies_compiler_type=$depmode
      break
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
AC_SUBST([$1DEPMODE])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[rm -f .deps 2>/dev/null
mkdir .deps 2>/dev/null
if test -d .deps; then
  DEPDIR=.deps
else
  # MS-DOS does not allow filenames that begin with a dot.
  DEPDIR=_deps
fi
rmdir .deps 2>/dev/null
AC_SUBST(DEPDIR)
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[  --disable-dependency-tracking Speeds up one-time builds
  --enable-dependency-tracking  Do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
pushdef([subst], defn([AC_SUBST]))
subst(AMDEPBACKSLASH)
popdef([subst])
])

# Generate code to set up dependency tracking.
# This macro should only be invoked once -- use via AC_REQUIRE.
# Usage:
# AM_OUTPUT_DEPENDENCY_COMMANDS

#
# This code is only required when automatic dependency tracking
# is enabled.  FIXME.  This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
AC_OUTPUT_COMMANDS([
test x"$AMDEP_TRUE" != x"" ||
for mf in $CONFIG_FILES; do
  case "$mf" in
  Makefile) dirpart=.;;
  */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
  *) continue;;
  esac
  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
  # Extract the definition of DEP_FILES from the Makefile without
  # running `make'.
  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
  test -z "$DEPDIR" && continue
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n -e '/^U = / s///p' < "$mf"`
  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
  # We invoke sed twice because it is the simplest approach to
  # changing $(DEPDIR) to its actual value in the expansion.
  for file in `sed -n -e '
    /^DEP_FILES = .*\\\\$/ {
      s/^DEP_FILES = //
      :loop
	s/\\\\$//
	p
	n
	/\\\\$/ b loop
      p
    }
    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
    $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
], [AMDEP_TRUE="$AMDEP_TRUE"
ac_aux_dir="$ac_aux_dir"])])

# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
doit:
	@echo done
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include='#'
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
   am__include=include
   am__quote=
   _am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
      am__include=.include
      am__quote='"'
      _am_result=BSD
   fi
fi
AC_SUBST(am__include)
AC_SUBST(am__quote)
AC_MSG_RESULT($_am_result)
rm -f confinc confmf
])

# serial 3

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
#
# FIXME: Once using 2.50, use this:
# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_DEFUN([AM_CONDITIONAL],
[ifelse([$1], [TRUE],
        [errprint(__file__:__line__: [$0: invalid condition: $1
])dnl
m4exit(1)])dnl
ifelse([$1], [FALSE],
       [errprint(__file__:__line__: [$0: invalid condition: $1
])dnl
m4exit(1)])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi])


# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl

# Save cache, so that ltconfig can load it
AC_CACHE_SAVE

# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])

# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl

case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)
  ;;
])
esac
])

# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])

# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])

# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])

# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])


# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])

# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
changequote(,)dnl
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])

AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi])
])

# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments.  Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case "$enable_ltdl_convenience" in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!).  If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    INCLTDL=
  fi
])

dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl

dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl

# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN(AM_PATH_SDL,
[dnl 
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
            sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
            sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
		    , enable_sdltest=yes)

  if test x$sdl_exec_prefix != x ; then
     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
     if test x${SDL_CONFIG+set} != xset ; then
        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
     fi
  fi
  if test x$sdl_prefix != x ; then
     sdl_args="$sdl_args --prefix=$sdl_prefix"
     if test x${SDL_CONFIG+set} != xset ; then
        SDL_CONFIG=$sdl_prefix/bin/sdl-config
     fi
  fi

  AC_REQUIRE([AC_CANONICAL_TARGET])
  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
  min_sdl_version=ifelse([$1], ,0.11.0,$1)
  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
  no_sdl=""
  if test "$SDL_CONFIG" = "no" ; then
    no_sdl=yes
  else
    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`

    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_sdltest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $SDL_CFLAGS"
      LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
      rm -f conf.sdltest
      case "$target" in
          *-*-darwin*)
            cp -r `$SDL_CONFIG --nib` .
            dnl create an Info.plist file, unless one exists
            if test -f Info.plist ; then
             :
            else
             cp `$SDL_CONFIG --plist` .
            fi
              ;;
      esac
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro;
  char *tmp_version;

  /* This hangs on some systems (?)
  system ("touch conf.sdltest");
  */
  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_sdl_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_sdl_version");
     exit(1);
   }

   if (($sdl_major_version > major) ||
      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_sdl" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$SDL_CONFIG" = "no" ; then
       echo "*** The sdl-config script installed by SDL could not be found"
       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the SDL_CONFIG environment variable to the"
       echo "*** full path to sdl-config."
     else
       if test -f conf.sdltest ; then
        :
       else
          echo "*** Could not run SDL test program, checking why..."
          CFLAGS="$CFLAGS $SDL_CFLAGS"
          LIBS="$LIBS $SDL_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"

int main(int argc, char *argv[])
{ return 0; }
#undef  main
#define main K_and_R_C_main
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding SDL or finding the wrong"
          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     SDL_CFLAGS=""
     SDL_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(SDL_CFLAGS)
  AC_SUBST(SDL_LIBS)
      case "$target" in
          *-*-darwin*)
              SDL_APPLE_CREATOR="????"
              AC_SUBST(SDL_APPLE_CREATOR)
              ;;
      esac
  rm -f conf.sdltest
])

# Configure paths for libmikmod
#
# Derived from glib.m4 (Owen Taylor 97-11-3)
# Improved by Chris Butler
#

dnl AM_PATH_LIBMIKMOD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]])
dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and
dnl LIBMIKMOD_LDADD
dnl
AC_DEFUN(AM_PATH_LIBMIKMOD,
[dnl 
dnl Get the cflags and libraries from the libmikmod-config script
dnl
AC_ARG_WITH(libmikmod-prefix,[  --with-libmikmod-prefix=PFX   Prefix where libmikmod is installed (optional)],
            libmikmod_config_prefix="$withval", libmikmod_config_prefix="")
AC_ARG_WITH(libmikmod-exec-prefix,[  --with-libmikmod-exec-prefix=PFX Exec prefix where libmikmod is installed (optional)],
            libmikmod_config_exec_prefix="$withval", libmikmod_config_exec_prefix="")
AC_ARG_ENABLE(libmikmodtest, [  --disable-libmikmodtest       Do not try to compile and run a test libmikmod program],
		    , enable_libmikmodtest=yes)

  if test x$libmikmod_config_exec_prefix != x ; then
     libmikmod_config_args="$libmikmod_config_args --exec-prefix=$libmikmod_config_exec_prefix"
     if test x${LIBMIKMOD_CONFIG+set} != xset ; then
        LIBMIKMOD_CONFIG=$libmikmod_config_exec_prefix/bin/libmikmod-config
     fi
  fi
  if test x$libmikmod_config_prefix != x ; then
     libmikmod_config_args="$libmikmod_config_args --prefix=$libmikmod_config_prefix"
     if test x${LIBMIKMOD_CONFIG+set} != xset ; then
        LIBMIKMOD_CONFIG=$libmikmod_config_prefix/bin/libmikmod-config
     fi
  fi

  AC_PATH_PROG(LIBMIKMOD_CONFIG, libmikmod-config, no)
  min_libmikmod_version=ifelse([$1], ,3.1.5,$1)
  AC_MSG_CHECKING(for libmikmod - version >= $min_libmikmod_version)
  no_libmikmod=""
  if test "$LIBMIKMOD_CONFIG" = "no" ; then
    no_libmikmod=yes
  else
    LIBMIKMOD_CFLAGS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --cflags`
    LIBMIKMOD_LIBS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --libs`
    LIBMIKMOD_LDADD=`$LIBMIKMOD_CONFIG $libmikmod_config_args --ldadd`
    libmikmod_config_major_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'`
    libmikmod_config_minor_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'`
    libmikmod_config_micro_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'`
    if test "x$enable_libmikmodtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
	  AC_LANG_SAVE
	  AC_LANG_C
      CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS $LIBMIKMOD_LDADD"
      LIBS="$LIBMIKMOD_LIBS $LIBS"
dnl
dnl Now check if the installed libmikmod is sufficiently new. (Also sanity
dnl checks the results of libmikmod-config to some extent
dnl
      rm -f conf.mikmodtest
      AC_TRY_RUN([
#include <mikmod.h>
#include <stdio.h>
#include <stdlib.h>

char* my_strdup (char *str)
{
  char *new_str;

  if (str) {
    new_str = malloc ((strlen (str) + 1) * sizeof(char));
    strcpy (new_str, str);
  } else
    new_str = NULL;

  return new_str;
}

int main()
{
  int major,minor,micro;
  int libmikmod_major_version,libmikmod_minor_version,libmikmod_micro_version;
  char *tmp_version;

  system("touch conf.mikmodtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_libmikmod_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_libmikmod_version");
     exit(1);
   }

  libmikmod_major_version=(MikMod_GetVersion() >> 16) & 255;
  libmikmod_minor_version=(MikMod_GetVersion() >>  8) & 255;
  libmikmod_micro_version=(MikMod_GetVersion()      ) & 255;

  if ((libmikmod_major_version != $libmikmod_config_major_version) ||
      (libmikmod_minor_version != $libmikmod_config_minor_version) ||
      (libmikmod_micro_version != $libmikmod_config_micro_version))
    {
      printf("\n*** 'libmikmod-config --version' returned %d.%d.%d, but libmikmod (%d.%d.%d)\n", 
             $libmikmod_config_major_version, $libmikmod_config_minor_version, $libmikmod_config_micro_version,
             libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version);
      printf ("*** was found! If libmikmod-config was correct, then it is best\n");
      printf ("*** to remove the old version of libmikmod. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If libmikmod-config was wrong, set the environment variable LIBMIKMOD_CONFIG\n");
      printf("*** to point to the correct copy of libmikmod-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
  else if ((libmikmod_major_version != LIBMIKMOD_VERSION_MAJOR) ||
	   (libmikmod_minor_version != LIBMIKMOD_VERSION_MINOR) ||
           (libmikmod_micro_version != LIBMIKMOD_REVISION))
    {
      printf("*** libmikmod header files (version %d.%d.%d) do not match\n",
	     LIBMIKMOD_VERSION_MAJOR, LIBMIKMOD_VERSION_MINOR, LIBMIKMOD_REVISION);
      printf("*** library (version %d.%d.%d)\n",
	     libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version);
    }
  else
    {
      if ((libmikmod_major_version > major) ||
        ((libmikmod_major_version == major) && (libmikmod_minor_version > minor)) ||
        ((libmikmod_major_version == major) && (libmikmod_minor_version == minor) && (libmikmod_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of libmikmod (%d.%d.%d) was found.\n",
               libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version);
        printf("*** You need a version of libmikmod newer than %d.%d.%d.\n",
	       major, minor, micro);
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the libmikmod-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of libmikmod, but you can also set the LIBMIKMOD_CONFIG environment to point to the\n");
        printf("*** correct copy of libmikmod-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_libmikmod=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
	   AC_LANG_RESTORE
     fi
  fi
  if test "x$no_libmikmod" = x ; then
     AC_MSG_RESULT([yes, `$LIBMIKMOD_CONFIG --version`])
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$LIBMIKMOD_CONFIG" = "no" ; then
       echo "*** The libmikmod-config script installed by libmikmod could not be found"
       echo "*** If libmikmod was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the LIBMIKMOD_CONFIG environment variable to the"
       echo "*** full path to libmikmod-config."
     else
       if test -f conf.mikmodtest ; then
        :
       else
          echo "*** Could not run libmikmod test program, checking why..."
          CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS"
          LIBS="$LIBS $LIBMIKMOD_LIBS"
		  AC_LANG_SAVE
		  AC_LANG_C
          AC_TRY_LINK([
#include <mikmod.h>
#include <stdio.h>
],      [ return (MikMod_GetVersion()!=0); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding libmikmod or finding the wrong"
          echo "*** version of libmikmod. If it is not finding libmikmod, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location. Also, make sure you have run ldconfig if that"
          echo "*** is required on your system."
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means libmikmod was incorrectly installed"
          echo "*** or that you have moved libmikmod since it was installed. In the latter case, you"
          echo "*** may want to edit the libmikmod-config script: $LIBMIKMOD_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
		  AC_LANG_RESTORE
       fi
     fi
     LIBMIKMOD_CFLAGS=""
     LIBMIKMOD_LIBS=""
     LIBMIKMOD_LDADD=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(LIBMIKMOD_CFLAGS)
  AC_SUBST(LIBMIKMOD_LIBS)
  AC_SUBST(LIBMIKMOD_LDADD)
  rm -f conf.mikmodtest
])

# Configure paths for libvorbis
# Jack Moffitt <jack@icecast.org> 10-21-2000
# Shamelessly stolen from Owen Taylor and Manish Singh

dnl AM_PATH_VORBIS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]])
dnl Test for libvorbis, and define VORBIS_CFLAGS and VORBIS_LIBS
dnl
AC_DEFUN(AM_PATH_VORBIS,
[dnl 
dnl Get the cflags and libraries
dnl
AC_ARG_WITH(vorbis-prefix,[  --with-vorbis-prefix=PFX   Prefix where libvorbis is installed (optional)], vorbis_prefix="$withval", vorbis_prefix="")
AC_ARG_ENABLE(vorbistest, [  --disable-vorbistest       Do not try to compile and run a test Vorbis program],, enable_vorbistest=yes)

  if test "x$vorbis_prefix" != "xNONE" ; then
    vorbis_args="$vorbis_args --prefix=$vorbis_prefix"
    VORBIS_CFLAGS="-I$vorbis_prefix/include"
    VORBIS_LIBDIR="-L$vorbis_prefix/lib"
  elif test "$prefix" != ""; then
    vorbis_args="$vorbis_args --prefix=$prefix"
    VORBIS_CFLAGS="-I$prefix/include"
    VORBIS_LIBDIR="-L$prefix/lib"
  fi

  VORBIS_LIBS="$VORBIS_LIBDIR -lvorbis -lm"
  VORBISFILE_LIBS="-lvorbisfile"
  VORBISENC_LIBS="-lvorbisenc"

  AC_MSG_CHECKING(for Vorbis)
  no_vorbis=""


  if test "x$enable_vorbistest" = "xyes" ; then
    ac_save_CFLAGS="$CFLAGS"
    ac_save_LIBS="$LIBS"
    CFLAGS="$CFLAGS $VORBIS_CFLAGS"
    LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS"
dnl
dnl Now check if the installed Vorbis is sufficiently new.
dnl
      rm -f conf.vorbistest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <vorbis/codec.h>

int main ()
{
  system("touch conf.vorbistest");
  return 0;
}

],, no_vorbis=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
  fi

  if test "x$no_vorbis" = "x" ; then
     AC_MSG_RESULT(yes)
     ifelse([$1], , :, [$1])     
  else
     AC_MSG_RESULT(no)
     if test -f conf.vorbistest ; then
       :
     else
       echo "*** Could not run Vorbis test program, checking why..."
       CFLAGS="$CFLAGS $VORBIS_CFLAGS"
       LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS"
       AC_TRY_LINK([
#include <stdio.h>
#include <vorbis/codec.h>
],     [ return 0; ],
       [ echo "*** The test program compiled, but did not run. This usually means"
       echo "*** that the run-time linker is not finding Vorbis or finding the wrong"
       echo "*** version of Vorbis. If it is not finding Vorbis, you'll need to set your"
       echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
       echo "*** to the installed location  Also, make sure you have run ldconfig if that"
       echo "*** is required on your system"
       echo "***"
       echo "*** If you have an old version installed, it is best to remove it, although"
       echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
       [ echo "*** The test program failed to compile or link. See the file config.log for the"
       echo "*** exact error that occured. This usually means Vorbis was incorrectly installed"
       echo "*** or that you have moved Vorbis since it was installed." ])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
     VORBIS_CFLAGS=""
     VORBIS_LIBS=""
     VORBISFILE_LIBS=""
     VORBISENC_LIBS=""
     ifelse([$2], , :, [$2])
  fi
  AC_SUBST(VORBIS_CFLAGS)
  AC_SUBST(VORBIS_LIBS)
  AC_SUBST(VORBISFILE_LIBS)
  AC_SUBST(VORBISENC_LIBS)
  rm -f conf.vorbistest
])

# Configure paths for SMPEG
# Nicolas Vignal 11/19/2000
# stolen from Sam Lantinga
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

dnl AM_PATH_SMPEG([MINIMUM-VERSION, [ACTION-IF-FOUND [, 
ACTION-IF-NOT-FOUND]]])
dnl Test for SMPEG, and define SMPEG_CFLAGS and SMPEG_LIBS
dnl
AC_DEFUN(AM_PATH_SMPEG,
[dnl
dnl Get the cflags and libraries from the smpeg-config script
dnl
AC_ARG_WITH(smpeg-prefix,[  --with-smpeg-prefix=PFX   Prefix where SMPEG is 
installed (optional)],
            smpeg_prefix="$withval", smpeg_prefix="")
AC_ARG_WITH(smpeg-exec-prefix,[  --with-smpeg-exec-prefix=PFX Exec prefix 
where SMPEG is installed (optional)],
            smpeg_exec_prefix="$withval", smpeg_exec_prefix="")
AC_ARG_ENABLE(smpegtest, [  --disable-smpegtest       Do not try to compile 
and run a test SMPEG program],
                    , enable_smpegtest=yes)

  if test x$smpeg_exec_prefix != x ; then
     smpeg_args="$smpeg_args --exec-prefix=$smpeg_exec_prefix"
     if test x${SMPEG_CONFIG+set} != xset ; then
        SMPEG_CONFIG=$smpeg_exec_prefix/bin/smpeg-config
     fi
  fi
  if test x$smpeg_prefix != x ; then
     smpeg_args="$smpeg_args --prefix=$smpeg_prefix"
     if test x${SMPEG_CONFIG+set} != xset ; then
        SMPEG_CONFIG=$smpeg_prefix/bin/smpeg-config
     fi
  fi

  AC_PATH_PROG(SMPEG_CONFIG, smpeg-config, no)
  min_smpeg_version=ifelse([$1], ,0.2.7,$1)
  AC_MSG_CHECKING(for SMPEG - version >= $min_smpeg_version)
  no_smpeg=""
  if test "$SMPEG_CONFIG" = "no" ; then
    no_smpeg=yes
  else
    SMPEG_CFLAGS=`$SMPEG_CONFIG $smpegconf_args --cflags`
    SMPEG_LIBS=`$SMPEG_CONFIG $smpegconf_args --libs`

    smpeg_major_version=`$SMPEG_CONFIG $smpeg_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    smpeg_minor_version=`$SMPEG_CONFIG $smpeg_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    smpeg_micro_version=`$SMPEG_CONFIG $smpeg_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_smpegtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS"
      LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SMPEG is sufficiently new. (Also sanity
dnl checks the results of smpeg-config to some extent
dnl
      rm -f conf.smpegtest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "smpeg.h"

char*
my_strdup (char *str)
{
  char *new_str;

  if (str)
    {
      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;

  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro;
  char *tmp_version;

  /* This hangs on some systems (?)
  system ("touch conf.smpegtest");
  */
  { FILE *fp = fopen("conf.smpegtest", "a"); if ( fp ) fclose(fp); }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_smpeg_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_smpeg_version");
     exit(1);
   }

   if (($smpeg_major_version > major) ||
      (($smpeg_major_version == major) && ($smpeg_minor_version > minor)) ||
      (($smpeg_major_version == major) && ($smpeg_minor_version == minor) 
&& ($smpeg_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'smpeg-config --version' returned %d.%d.%d, but the 
minimum version\n", $smpeg_major_version, $smpeg_minor_version, 
$smpeg_micro_version);
      printf("*** of SMPEG required is %d.%d.%d. If smpeg-config is 
correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If smpeg-config was wrong, set the environment variable 
SMPEG_CONFIG\n");
      printf("*** to point to the correct copy of smpeg-config, and remove 
the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_smpeg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_smpeg" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])
  else
     AC_MSG_RESULT(no)
     if test "$SMPEG_CONFIG" = "no" ; then
       echo "*** The smpeg-config script installed by SMPEG could not be 
found"
       echo "*** If SMPEG was installed in PREFIX, make sure PREFIX/bin is 
in"
       echo "*** your path, or set the SMPEG_CONFIG environment variable to 
the"
       echo "*** full path to smpeg-config."
     else
       if test -f conf.smpegtest ; then
        :
       else
          echo "*** Could not run SMPEG test program, checking why..."
          CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS"
          LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include "smpeg.h"
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This 
usually means"
          echo "*** that the run-time linker is not finding SMPEG or 
finding the wrong"
          echo "*** version of SMPEG. If it is not finding SMPEG, you'll 
need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit 
/etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run 
ldconfig if that"
          echo "*** is required on your system"
          echo "***"
          echo "*** If you have an old version installed, it is best to 
remove it, although"
          echo "*** you may also be able to get things to work by modifying 
LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the 
file config.log for the"
          echo "*** exact error that occured. This usually means SMPEG was 
incorrectly installed"
          echo "*** or that you have moved SMPEG since it was installed. In 
the latter case, you"
          echo "*** may want to edit the smpeg-config script: 
$SMPEG_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     SMPEG_CFLAGS=""
     SMPEG_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(SMPEG_CFLAGS)
  AC_SUBST(SMPEG_LIBS)
  rm -f conf.smpegtest
])