Mercurial > SDL_sound_CoreAudio
diff aclocal.m4 @ 65:cee26d04d0ca
Initial add.
author | Ryan C. Gordon <icculus@icculus.org> |
---|---|
date | Tue, 25 Sep 2001 01:10:20 +0000 |
parents | |
children |
line wrap: on
line diff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/aclocal.m4 Tue Sep 25 01:10:20 2001 +0000 @@ -0,0 +1,1601 @@ +# aclocal.m4 generated automatically by aclocal 1.5 + +# Copyright 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 5 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# We require 2.13 because we rely on SHELL being computed by configure. +AC_PREREQ([2.13]) + +# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) +# ----------------------------------------------------------- +# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED. +# The purpose of this macro is to provide the user with a means to +# check macros which are provided without letting her know how the +# information is coded. +# If this macro is not defined by Autoconf, define it here. +ifdef([AC_PROVIDE_IFELSE], + [], + [define([AC_PROVIDE_IFELSE], + [ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE]) +# ---------------------------------------------- +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first]) +fi + +# Define the identity of the package. +PACKAGE=$1 +AC_SUBST(PACKAGE)dnl +VERSION=$2 +AC_SUBST(VERSION)dnl +ifelse([$3],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) + +# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow +# the ones we care about. +ifdef([m4_pattern_allow], + [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl + +# Autoconf 2.50 always computes EXEEXT. However we need to be +# compatible with 2.13, for now. So we always define EXEEXT, but we +# don't compute it. +AC_SUBST(EXEEXT) +# Similar for OBJEXT -- only we only use OBJEXT if the user actually +# requests that it be used. This is a bit dumb. +: ${OBJEXT=o} +AC_SUBST(OBJEXT) + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_MISSING_PROG(AMTAR, tar) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl +AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_PROVIDE_IFELSE([AC_PROG_][CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_][CC], + defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_][CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_][CXX], + defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) + +# +# Check to make sure that the build environment is sane. +# + +# serial 3 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + + +# serial 2 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + am_backtick='`' + AC_MSG_WARN([${am_backtick}missing' script is too old or missing]) +fi +]) + +# AM_AUX_DIR_EXPAND + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], [ +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# serial 4 -*- Autoconf -*- + + + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + + +# _AM_DEPENDENCIES(NAME) +# --------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX" or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + echo '#include "conftest.h"' > conftest.c + echo 'int i;' > conftest.h + echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=conftest.c object=conftest.o \ + depfile=conftest.Po tmpdepfile=conftest.TPo \ + $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && + grep conftest.h conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type" +AC_SUBST([$1DEPMODE]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[rm -f .deps 2>/dev/null +mkdir .deps 2>/dev/null +if test -d .deps; then + DEPDIR=.deps +else + # MS-DOS does not allow filenames that begin with a dot. + DEPDIR=_deps +fi +rmdir .deps 2>/dev/null +AC_SUBST(DEPDIR) +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking Speeds up one-time builds + --enable-dependency-tracking Do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +pushdef([subst], defn([AC_SUBST])) +subst(AMDEPBACKSLASH) +popdef([subst]) +]) + +# Generate code to set up dependency tracking. +# This macro should only be invoked once -- use via AC_REQUIRE. +# Usage: +# AM_OUTPUT_DEPENDENCY_COMMANDS + +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[ +AC_OUTPUT_COMMANDS([ +test x"$AMDEP_TRUE" != x"" || +for mf in $CONFIG_FILES; do + case "$mf" in + Makefile) dirpart=.;; + */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;; + *) continue;; + esac + grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue + # Extract the definition of DEP_FILES from the Makefile without + # running `make'. + DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` + test -z "$DEPDIR" && continue + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n -e '/^U = / s///p' < "$mf"` + test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" + # We invoke sed twice because it is the simplest approach to + # changing $(DEPDIR) to its actual value in the expansion. + for file in `sed -n -e ' + /^DEP_FILES = .*\\\\$/ { + s/^DEP_FILES = // + :loop + s/\\\\$// + p + n + /\\\\$/ b loop + p + } + /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`echo "$file" | sed -e 's|/[^/]*$||'` + $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1 + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +], [AMDEP_TRUE="$AMDEP_TRUE" +ac_aux_dir="$ac_aux_dir"])]) + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +doit: + @echo done +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include='#' +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote='"' + _am_result=BSD + fi +fi +AC_SUBST(am__include) +AC_SUBST(am__quote) +AC_MSG_RESULT($_am_result) +rm -f confinc confmf +]) + +# serial 3 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +# +# FIXME: Once using 2.50, use this: +# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_DEFUN([AM_CONDITIONAL], +[ifelse([$1], [TRUE], + [errprint(__file__:__line__: [$0: invalid condition: $1 +])dnl +m4exit(1)])dnl +ifelse([$1], [FALSE], + [errprint(__file__:__line__: [$0: invalid condition: $1 +])dnl +m4exit(1)])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + + +# serial 40 AC_PROG_LIBTOOL +AC_DEFUN(AC_PROG_LIBTOOL, +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl + +# Save cache, so that ltconfig can load it +AC_CACHE_SAVE + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ +DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +|| AC_MSG_ERROR([libtool configure failed]) + +# Reload cache, that may have been modified by ltconfig +AC_CACHE_LOAD + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log +]) + +AC_DEFUN(AC_LIBTOOL_SETUP, +[AC_PREREQ(2.13)dnl +AC_REQUIRE([AC_ENABLE_SHARED])dnl +AC_REQUIRE([AC_ENABLE_STATIC])dnl +AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_RANLIB])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_NM])dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +dnl + +case "$target" in +NONE) lt_target="$host" ;; +*) lt_target="$target" ;; +esac + +# Check for any special flags to pass to ltconfig. +libtool_flags="--cache-file=$cache_file" +test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" +test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], +[libtool_flags="$libtool_flags --enable-dlopen"]) +ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +[libtool_flags="$libtool_flags --enable-win32-dll"]) +AC_ARG_ENABLE(libtool-lock, + [ --disable-libtool-lock avoid locking (might break parallel builds)]) +test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" +test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case "$lt_target" in +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + +ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], +[*-*-cygwin* | *-*-mingw*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +]) +esac +]) + +# AC_LIBTOOL_DLOPEN - enable checks for dlopen support +AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) + +# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's +AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) + +# AC_ENABLE_SHARED - implement the --enable-shared flag +# Usage: AC_ENABLE_SHARED[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AC_ENABLE_SHARED, [dnl +define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(shared, +changequote(<<, >>)dnl +<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl +]) + +# AC_DISABLE_SHARED - set the default shared flag to --disable-shared +AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no)]) + +# AC_ENABLE_STATIC - implement the --enable-static flag +# Usage: AC_ENABLE_STATIC[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AC_ENABLE_STATIC, [dnl +define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(static, +changequote(<<, >>)dnl +<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_static=AC_ENABLE_STATIC_DEFAULT)dnl +]) + +# AC_DISABLE_STATIC - set the default static flag to --disable-static +AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no)]) + + +# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag +# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl +define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(fast-install, +changequote(<<, >>)dnl +<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl +]) + +# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no)]) + +# AC_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AC_PROG_LD, +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$ac_cv_prog_gcc" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + ac_prog=`($CC -print-prog-name=ld) 2>&5` + case "$ac_prog" in + # Accept absolute paths. +changequote(,)dnl + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' +changequote([,])dnl + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(ac_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + ac_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + ac_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$ac_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_PROG_LD_GNU +]) + +AC_DEFUN(AC_PROG_LD_GNU, +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then + ac_cv_prog_gnu_ld=yes +else + ac_cv_prog_gnu_ld=no +fi]) +]) + +# AC_PROG_NM - find the path to a BSD-compatible name lister +AC_DEFUN(AC_PROG_NM, +[AC_MSG_CHECKING([for BSD-compatible nm]) +AC_CACHE_VAL(ac_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + ac_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + ac_cv_path_NM="$ac_dir/nm -B" + break + elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + ac_cv_path_NM="$ac_dir/nm -p" + break + else + ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm +fi]) +NM="$ac_cv_path_NM" +AC_MSG_RESULT([$NM]) +]) + +# AC_CHECK_LIBM - check for math library +AC_DEFUN(AC_CHECK_LIBM, +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case "$lt_target" in +*-*-beos* | *-*-cygwin*) + # These system don't have libm + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, main, LIBM="-lm") + ;; +esac +]) + +# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl convenience library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-convenience to the +# configure arguments. Note that LIBLTDL and INCLTDL are not +# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not +# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed +# with '${top_builddir}/' and INCLTDL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case "$enable_ltdl_convenience" in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +]) + +# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for +# the libltdl installable library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-install to the configure +# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed +# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +# with '${top_srcdir}/' (note the single quotes!). If your package is +# not flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, main, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + INCLTDL= + fi +]) + +dnl old names +AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl +AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl +AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl +AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl +AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl +AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl +AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl + +dnl This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL])dnl + +# Configure paths for SDL +# Sam Lantinga 9/21/99 +# stolen from Manish Singh +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS +dnl +AC_DEFUN(AM_PATH_SDL, +[dnl +dnl Get the cflags and libraries from the sdl-config script +dnl +AC_ARG_WITH(sdl-prefix,[ --with-sdl-prefix=PFX Prefix where SDL is installed (optional)], + sdl_prefix="$withval", sdl_prefix="") +AC_ARG_WITH(sdl-exec-prefix,[ --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)], + sdl_exec_prefix="$withval", sdl_exec_prefix="") +AC_ARG_ENABLE(sdltest, [ --disable-sdltest Do not try to compile and run a test SDL program], + , enable_sdltest=yes) + + if test x$sdl_exec_prefix != x ; then + sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix" + if test x${SDL_CONFIG+set} != xset ; then + SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config + fi + fi + if test x$sdl_prefix != x ; then + sdl_args="$sdl_args --prefix=$sdl_prefix" + if test x${SDL_CONFIG+set} != xset ; then + SDL_CONFIG=$sdl_prefix/bin/sdl-config + fi + fi + + AC_REQUIRE([AC_CANONICAL_TARGET]) + AC_PATH_PROG(SDL_CONFIG, sdl-config, no) + min_sdl_version=ifelse([$1], ,0.11.0,$1) + AC_MSG_CHECKING(for SDL - version >= $min_sdl_version) + no_sdl="" + if test "$SDL_CONFIG" = "no" ; then + no_sdl=yes + else + SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags` + SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs` + + sdl_major_version=`$SDL_CONFIG $sdl_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_sdltest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" +dnl +dnl Now check if the installed SDL is sufficiently new. (Also sanity +dnl checks the results of sdl-config to some extent +dnl + rm -f conf.sdltest + case "$target" in + *-*-darwin*) + cp -r `$SDL_CONFIG --nib` . + dnl create an Info.plist file, unless one exists + if test -f Info.plist ; then + : + else + cp `$SDL_CONFIG --plist` . + fi + ;; + esac + AC_TRY_RUN([ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include "SDL.h" + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main (int argc, char *argv[]) +{ + int major, minor, micro; + char *tmp_version; + + /* This hangs on some systems (?) + system ("touch conf.sdltest"); + */ + { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); } + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_sdl_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_sdl_version"); + exit(1); + } + + if (($sdl_major_version > major) || + (($sdl_major_version == major) && ($sdl_minor_version > minor)) || + (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version); + printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n"); + printf("*** to point to the correct copy of sdl-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_sdl" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$SDL_CONFIG" = "no" ; then + echo "*** The sdl-config script installed by SDL could not be found" + echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the SDL_CONFIG environment variable to the" + echo "*** full path to sdl-config." + else + if test -f conf.sdltest ; then + : + else + echo "*** Could not run SDL test program, checking why..." + CFLAGS="$CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SDL_LIBS" + AC_TRY_LINK([ +#include <stdio.h> +#include "SDL.h" + +int main(int argc, char *argv[]) +{ return 0; } +#undef main +#define main K_and_R_C_main +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding SDL or finding the wrong" + echo "*** version of SDL. If it is not finding SDL, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means SDL was incorrectly installed" + echo "*** or that you have moved SDL since it was installed. In the latter case, you" + echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + SDL_CFLAGS="" + SDL_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(SDL_CFLAGS) + AC_SUBST(SDL_LIBS) + case "$target" in + *-*-darwin*) + SDL_APPLE_CREATOR="????" + AC_SUBST(SDL_APPLE_CREATOR) + ;; + esac + rm -f conf.sdltest +]) + +# Configure paths for libmikmod +# +# Derived from glib.m4 (Owen Taylor 97-11-3) +# Improved by Chris Butler +# + +dnl AM_PATH_LIBMIKMOD([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]]) +dnl Test for libmikmod, and define LIBMIKMOD_CFLAGS, LIBMIKMOD_LIBS and +dnl LIBMIKMOD_LDADD +dnl +AC_DEFUN(AM_PATH_LIBMIKMOD, +[dnl +dnl Get the cflags and libraries from the libmikmod-config script +dnl +AC_ARG_WITH(libmikmod-prefix,[ --with-libmikmod-prefix=PFX Prefix where libmikmod is installed (optional)], + libmikmod_config_prefix="$withval", libmikmod_config_prefix="") +AC_ARG_WITH(libmikmod-exec-prefix,[ --with-libmikmod-exec-prefix=PFX Exec prefix where libmikmod is installed (optional)], + libmikmod_config_exec_prefix="$withval", libmikmod_config_exec_prefix="") +AC_ARG_ENABLE(libmikmodtest, [ --disable-libmikmodtest Do not try to compile and run a test libmikmod program], + , enable_libmikmodtest=yes) + + if test x$libmikmod_config_exec_prefix != x ; then + libmikmod_config_args="$libmikmod_config_args --exec-prefix=$libmikmod_config_exec_prefix" + if test x${LIBMIKMOD_CONFIG+set} != xset ; then + LIBMIKMOD_CONFIG=$libmikmod_config_exec_prefix/bin/libmikmod-config + fi + fi + if test x$libmikmod_config_prefix != x ; then + libmikmod_config_args="$libmikmod_config_args --prefix=$libmikmod_config_prefix" + if test x${LIBMIKMOD_CONFIG+set} != xset ; then + LIBMIKMOD_CONFIG=$libmikmod_config_prefix/bin/libmikmod-config + fi + fi + + AC_PATH_PROG(LIBMIKMOD_CONFIG, libmikmod-config, no) + min_libmikmod_version=ifelse([$1], ,3.1.5,$1) + AC_MSG_CHECKING(for libmikmod - version >= $min_libmikmod_version) + no_libmikmod="" + if test "$LIBMIKMOD_CONFIG" = "no" ; then + no_libmikmod=yes + else + LIBMIKMOD_CFLAGS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --cflags` + LIBMIKMOD_LIBS=`$LIBMIKMOD_CONFIG $libmikmod_config_args --libs` + LIBMIKMOD_LDADD=`$LIBMIKMOD_CONFIG $libmikmod_config_args --ldadd` + libmikmod_config_major_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\1/'` + libmikmod_config_minor_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\2/'` + libmikmod_config_micro_version=`$LIBMIKMOD_CONFIG $libmikmod_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\).*/\3/'` + if test "x$enable_libmikmodtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + AC_LANG_SAVE + AC_LANG_C + CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS $LIBMIKMOD_LDADD" + LIBS="$LIBMIKMOD_LIBS $LIBS" +dnl +dnl Now check if the installed libmikmod is sufficiently new. (Also sanity +dnl checks the results of libmikmod-config to some extent +dnl + rm -f conf.mikmodtest + AC_TRY_RUN([ +#include <mikmod.h> +#include <stdio.h> +#include <stdlib.h> + +char* my_strdup (char *str) +{ + char *new_str; + + if (str) { + new_str = malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } else + new_str = NULL; + + return new_str; +} + +int main() +{ + int major,minor,micro; + int libmikmod_major_version,libmikmod_minor_version,libmikmod_micro_version; + char *tmp_version; + + system("touch conf.mikmodtest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_libmikmod_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_libmikmod_version"); + exit(1); + } + + libmikmod_major_version=(MikMod_GetVersion() >> 16) & 255; + libmikmod_minor_version=(MikMod_GetVersion() >> 8) & 255; + libmikmod_micro_version=(MikMod_GetVersion() ) & 255; + + if ((libmikmod_major_version != $libmikmod_config_major_version) || + (libmikmod_minor_version != $libmikmod_config_minor_version) || + (libmikmod_micro_version != $libmikmod_config_micro_version)) + { + printf("\n*** 'libmikmod-config --version' returned %d.%d.%d, but libmikmod (%d.%d.%d)\n", + $libmikmod_config_major_version, $libmikmod_config_minor_version, $libmikmod_config_micro_version, + libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); + printf ("*** was found! If libmikmod-config was correct, then it is best\n"); + printf ("*** to remove the old version of libmikmod. You may also be able to fix the error\n"); + printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); + printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); + printf("*** required on your system.\n"); + printf("*** If libmikmod-config was wrong, set the environment variable LIBMIKMOD_CONFIG\n"); + printf("*** to point to the correct copy of libmikmod-config, and remove the file config.cache\n"); + printf("*** before re-running configure\n"); + } + else if ((libmikmod_major_version != LIBMIKMOD_VERSION_MAJOR) || + (libmikmod_minor_version != LIBMIKMOD_VERSION_MINOR) || + (libmikmod_micro_version != LIBMIKMOD_REVISION)) + { + printf("*** libmikmod header files (version %d.%d.%d) do not match\n", + LIBMIKMOD_VERSION_MAJOR, LIBMIKMOD_VERSION_MINOR, LIBMIKMOD_REVISION); + printf("*** library (version %d.%d.%d)\n", + libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); + } + else + { + if ((libmikmod_major_version > major) || + ((libmikmod_major_version == major) && (libmikmod_minor_version > minor)) || + ((libmikmod_major_version == major) && (libmikmod_minor_version == minor) && (libmikmod_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** An old version of libmikmod (%d.%d.%d) was found.\n", + libmikmod_major_version, libmikmod_minor_version, libmikmod_micro_version); + printf("*** You need a version of libmikmod newer than %d.%d.%d.\n", + major, minor, micro); + printf("***\n"); + printf("*** If you have already installed a sufficiently new version, this error\n"); + printf("*** probably means that the wrong copy of the libmikmod-config shell script is\n"); + printf("*** being found. The easiest way to fix this is to remove the old version\n"); + printf("*** of libmikmod, but you can also set the LIBMIKMOD_CONFIG environment to point to the\n"); + printf("*** correct copy of libmikmod-config. (In this case, you will have to\n"); + printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); + printf("*** so that the correct libraries are found at run-time))\n"); + } + } + return 1; +} +],, no_libmikmod=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + AC_LANG_RESTORE + fi + fi + if test "x$no_libmikmod" = x ; then + AC_MSG_RESULT([yes, `$LIBMIKMOD_CONFIG --version`]) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$LIBMIKMOD_CONFIG" = "no" ; then + echo "*** The libmikmod-config script installed by libmikmod could not be found" + echo "*** If libmikmod was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the LIBMIKMOD_CONFIG environment variable to the" + echo "*** full path to libmikmod-config." + else + if test -f conf.mikmodtest ; then + : + else + echo "*** Could not run libmikmod test program, checking why..." + CFLAGS="$CFLAGS $LIBMIKMOD_CFLAGS" + LIBS="$LIBS $LIBMIKMOD_LIBS" + AC_LANG_SAVE + AC_LANG_C + AC_TRY_LINK([ +#include <mikmod.h> +#include <stdio.h> +], [ return (MikMod_GetVersion()!=0); ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding libmikmod or finding the wrong" + echo "*** version of libmikmod. If it is not finding libmikmod, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location. Also, make sure you have run ldconfig if that" + echo "*** is required on your system." + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means libmikmod was incorrectly installed" + echo "*** or that you have moved libmikmod since it was installed. In the latter case, you" + echo "*** may want to edit the libmikmod-config script: $LIBMIKMOD_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + AC_LANG_RESTORE + fi + fi + LIBMIKMOD_CFLAGS="" + LIBMIKMOD_LIBS="" + LIBMIKMOD_LDADD="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(LIBMIKMOD_CFLAGS) + AC_SUBST(LIBMIKMOD_LIBS) + AC_SUBST(LIBMIKMOD_LDADD) + rm -f conf.mikmodtest +]) + +# Configure paths for libvorbis +# Jack Moffitt <jack@icecast.org> 10-21-2000 +# Shamelessly stolen from Owen Taylor and Manish Singh + +dnl AM_PATH_VORBIS([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) +dnl Test for libvorbis, and define VORBIS_CFLAGS and VORBIS_LIBS +dnl +AC_DEFUN(AM_PATH_VORBIS, +[dnl +dnl Get the cflags and libraries +dnl +AC_ARG_WITH(vorbis-prefix,[ --with-vorbis-prefix=PFX Prefix where libvorbis is installed (optional)], vorbis_prefix="$withval", vorbis_prefix="") +AC_ARG_ENABLE(vorbistest, [ --disable-vorbistest Do not try to compile and run a test Vorbis program],, enable_vorbistest=yes) + + if test "x$vorbis_prefix" != "xNONE" ; then + vorbis_args="$vorbis_args --prefix=$vorbis_prefix" + VORBIS_CFLAGS="-I$vorbis_prefix/include" + VORBIS_LIBDIR="-L$vorbis_prefix/lib" + elif test "$prefix" != ""; then + vorbis_args="$vorbis_args --prefix=$prefix" + VORBIS_CFLAGS="-I$prefix/include" + VORBIS_LIBDIR="-L$prefix/lib" + fi + + VORBIS_LIBS="$VORBIS_LIBDIR -lvorbis -lm" + VORBISFILE_LIBS="-lvorbisfile" + VORBISENC_LIBS="-lvorbisenc" + + AC_MSG_CHECKING(for Vorbis) + no_vorbis="" + + + if test "x$enable_vorbistest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $VORBIS_CFLAGS" + LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS" +dnl +dnl Now check if the installed Vorbis is sufficiently new. +dnl + rm -f conf.vorbistest + AC_TRY_RUN([ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <vorbis/codec.h> + +int main () +{ + system("touch conf.vorbistest"); + return 0; +} + +],, no_vorbis=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + + if test "x$no_vorbis" = "x" ; then + AC_MSG_RESULT(yes) + ifelse([$1], , :, [$1]) + else + AC_MSG_RESULT(no) + if test -f conf.vorbistest ; then + : + else + echo "*** Could not run Vorbis test program, checking why..." + CFLAGS="$CFLAGS $VORBIS_CFLAGS" + LIBS="$LIBS $VORBIS_LIBS $OGG_LIBS" + AC_TRY_LINK([ +#include <stdio.h> +#include <vorbis/codec.h> +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding Vorbis or finding the wrong" + echo "*** version of Vorbis. If it is not finding Vorbis, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means Vorbis was incorrectly installed" + echo "*** or that you have moved Vorbis since it was installed." ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + VORBIS_CFLAGS="" + VORBIS_LIBS="" + VORBISFILE_LIBS="" + VORBISENC_LIBS="" + ifelse([$2], , :, [$2]) + fi + AC_SUBST(VORBIS_CFLAGS) + AC_SUBST(VORBIS_LIBS) + AC_SUBST(VORBISFILE_LIBS) + AC_SUBST(VORBISENC_LIBS) + rm -f conf.vorbistest +]) + +# Configure paths for SMPEG +# Nicolas Vignal 11/19/2000 +# stolen from Sam Lantinga +# stolen from Manish Singh +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +dnl AM_PATH_SMPEG([MINIMUM-VERSION, [ACTION-IF-FOUND [, +ACTION-IF-NOT-FOUND]]]) +dnl Test for SMPEG, and define SMPEG_CFLAGS and SMPEG_LIBS +dnl +AC_DEFUN(AM_PATH_SMPEG, +[dnl +dnl Get the cflags and libraries from the smpeg-config script +dnl +AC_ARG_WITH(smpeg-prefix,[ --with-smpeg-prefix=PFX Prefix where SMPEG is +installed (optional)], + smpeg_prefix="$withval", smpeg_prefix="") +AC_ARG_WITH(smpeg-exec-prefix,[ --with-smpeg-exec-prefix=PFX Exec prefix +where SMPEG is installed (optional)], + smpeg_exec_prefix="$withval", smpeg_exec_prefix="") +AC_ARG_ENABLE(smpegtest, [ --disable-smpegtest Do not try to compile +and run a test SMPEG program], + , enable_smpegtest=yes) + + if test x$smpeg_exec_prefix != x ; then + smpeg_args="$smpeg_args --exec-prefix=$smpeg_exec_prefix" + if test x${SMPEG_CONFIG+set} != xset ; then + SMPEG_CONFIG=$smpeg_exec_prefix/bin/smpeg-config + fi + fi + if test x$smpeg_prefix != x ; then + smpeg_args="$smpeg_args --prefix=$smpeg_prefix" + if test x${SMPEG_CONFIG+set} != xset ; then + SMPEG_CONFIG=$smpeg_prefix/bin/smpeg-config + fi + fi + + AC_PATH_PROG(SMPEG_CONFIG, smpeg-config, no) + min_smpeg_version=ifelse([$1], ,0.2.7,$1) + AC_MSG_CHECKING(for SMPEG - version >= $min_smpeg_version) + no_smpeg="" + if test "$SMPEG_CONFIG" = "no" ; then + no_smpeg=yes + else + SMPEG_CFLAGS=`$SMPEG_CONFIG $smpegconf_args --cflags` + SMPEG_LIBS=`$SMPEG_CONFIG $smpegconf_args --libs` + + smpeg_major_version=`$SMPEG_CONFIG $smpeg_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + smpeg_minor_version=`$SMPEG_CONFIG $smpeg_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + smpeg_micro_version=`$SMPEG_CONFIG $smpeg_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_smpegtest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS" +dnl +dnl Now check if the installed SMPEG is sufficiently new. (Also sanity +dnl checks the results of smpeg-config to some extent +dnl + rm -f conf.smpegtest + AC_TRY_RUN([ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include "smpeg.h" + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main (int argc, char *argv[]) +{ + int major, minor, micro; + char *tmp_version; + + /* This hangs on some systems (?) + system ("touch conf.smpegtest"); + */ + { FILE *fp = fopen("conf.smpegtest", "a"); if ( fp ) fclose(fp); } + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_smpeg_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_smpeg_version"); + exit(1); + } + + if (($smpeg_major_version > major) || + (($smpeg_major_version == major) && ($smpeg_minor_version > minor)) || + (($smpeg_major_version == major) && ($smpeg_minor_version == minor) +&& ($smpeg_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'smpeg-config --version' returned %d.%d.%d, but the +minimum version\n", $smpeg_major_version, $smpeg_minor_version, +$smpeg_micro_version); + printf("*** of SMPEG required is %d.%d.%d. If smpeg-config is +correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If smpeg-config was wrong, set the environment variable +SMPEG_CONFIG\n"); + printf("*** to point to the correct copy of smpeg-config, and remove +the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_smpeg=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_smpeg" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$SMPEG_CONFIG" = "no" ; then + echo "*** The smpeg-config script installed by SMPEG could not be +found" + echo "*** If SMPEG was installed in PREFIX, make sure PREFIX/bin is +in" + echo "*** your path, or set the SMPEG_CONFIG environment variable to +the" + echo "*** full path to smpeg-config." + else + if test -f conf.smpegtest ; then + : + else + echo "*** Could not run SMPEG test program, checking why..." + CFLAGS="$CFLAGS $SMPEG_CFLAGS $SDL_CFLAGS" + LIBS="$LIBS $SMPEG_LIBS $SDL_LIBS" + AC_TRY_LINK([ +#include <stdio.h> +#include "smpeg.h" +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This +usually means" + echo "*** that the run-time linker is not finding SMPEG or +finding the wrong" + echo "*** version of SMPEG. If it is not finding SMPEG, you'll +need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit +/etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run +ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to +remove it, although" + echo "*** you may also be able to get things to work by modifying +LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the +file config.log for the" + echo "*** exact error that occured. This usually means SMPEG was +incorrectly installed" + echo "*** or that you have moved SMPEG since it was installed. In +the latter case, you" + echo "*** may want to edit the smpeg-config script: +$SMPEG_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + SMPEG_CFLAGS="" + SMPEG_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(SMPEG_CFLAGS) + AC_SUBST(SMPEG_LIBS) + rm -f conf.smpegtest +]) +