Mercurial > MadButterfly
annotate Doxyfile @ 1383:bdacbdeb4447
Fix the typo
| author | wycc |
|---|---|
| date | Wed, 23 Mar 2011 23:11:33 +0800 |
| parents | b346e4699e55 |
| children | 31a21656c0a8 |
| rev | line source |
|---|---|
| 2 | 1 # Doxyfile 1.5.6 |
| 2 | |
| 3 # This file describes the settings to be used by the documentation system | |
| 4 # doxygen (www.doxygen.org) for a project | |
| 5 # | |
| 6 # All text after a hash (#) is considered a comment and will be ignored | |
| 7 # The format is: | |
| 8 # TAG = value [value, ...] | |
| 9 # For lists items can also be appended using: | |
| 10 # TAG += value [value, ...] | |
| 11 # Values that contain spaces should be placed between quotes (" ") | |
| 12 | |
| 13 #--------------------------------------------------------------------------- | |
| 14 # Project related configuration options | |
| 15 #--------------------------------------------------------------------------- | |
| 16 | |
| 17 # This tag specifies the encoding used for all characters in the config file | |
| 18 # that follow. The default is UTF-8 which is also the encoding used for all | |
| 19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the | |
| 20 # iconv built into libc) for the transcoding. See | |
| 21 # http://www.gnu.org/software/libiconv for the list of possible encodings. | |
| 22 | |
| 23 DOXYFILE_ENCODING = UTF-8 | |
| 24 | |
| 25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded | |
| 26 # by quotes) that should identify the project. | |
| 27 | |
| 28 PROJECT_NAME = MadButterfly | |
| 29 | |
| 30 # The PROJECT_NUMBER tag can be used to enter a project or revision number. | |
| 31 # This could be handy for archiving the generated documentation or | |
| 32 # if some version control system is used. | |
| 33 | |
| 34 PROJECT_NUMBER = | |
| 35 | |
| 36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) | |
| 37 # base path where the generated documentation will be put. | |
| 38 # If a relative path is entered, it will be relative to the location | |
| 39 # where doxygen was started. If left blank the current directory will be used. | |
| 40 | |
| 41 OUTPUT_DIRECTORY = doc | |
| 42 | |
| 43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create | |
| 44 # 4096 sub-directories (in 2 levels) under the output directory of each output | |
| 45 # format and will distribute the generated files over these directories. | |
| 46 # Enabling this option can be useful when feeding doxygen a huge amount of | |
| 47 # source files, where putting all generated files in the same directory would | |
| 48 # otherwise cause performance problems for the file system. | |
| 49 | |
| 50 CREATE_SUBDIRS = NO | |
| 51 | |
| 52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all | |
| 53 # documentation generated by doxygen is written. Doxygen will use this | |
| 54 # information to generate all constant output in the proper language. | |
| 55 # The default language is English, other supported languages are: | |
| 56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, | |
| 57 # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek, | |
| 58 # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages), | |
| 59 # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish, | |
| 60 # Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, | |
| 61 # and Ukrainian. | |
| 62 | |
| 63 OUTPUT_LANGUAGE = English | |
| 64 | |
| 65 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will | |
| 66 # include brief member descriptions after the members that are listed in | |
| 67 # the file and class documentation (similar to JavaDoc). | |
| 68 # Set to NO to disable this. | |
| 69 | |
| 70 BRIEF_MEMBER_DESC = YES | |
| 71 | |
| 72 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend | |
| 73 # the brief description of a member or function before the detailed description. | |
| 74 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the | |
| 75 # brief descriptions will be completely suppressed. | |
| 76 | |
| 77 REPEAT_BRIEF = YES | |
| 78 | |
| 79 # This tag implements a quasi-intelligent brief description abbreviator | |
| 80 # that is used to form the text in various listings. Each string | |
| 81 # in this list, if found as the leading text of the brief description, will be | |
| 82 # stripped from the text and the result after processing the whole list, is | |
| 83 # used as the annotated text. Otherwise, the brief description is used as-is. | |
| 84 # If left blank, the following values are used ("$name" is automatically | |
| 85 # replaced with the name of the entity): "The $name class" "The $name widget" | |
| 86 # "The $name file" "is" "provides" "specifies" "contains" | |
| 87 # "represents" "a" "an" "the" | |
| 88 | |
| 89 ABBREVIATE_BRIEF = | |
| 90 | |
| 91 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then | |
| 92 # Doxygen will generate a detailed section even if there is only a brief | |
| 93 # description. | |
| 94 | |
| 95 ALWAYS_DETAILED_SEC = NO | |
| 96 | |
| 97 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all | |
| 98 # inherited members of a class in the documentation of that class as if those | |
| 99 # members were ordinary class members. Constructors, destructors and assignment | |
| 100 # operators of the base classes will not be shown. | |
| 101 | |
| 102 INLINE_INHERITED_MEMB = NO | |
| 103 | |
| 104 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full | |
| 105 # path before files name in the file list and in the header files. If set | |
| 106 # to NO the shortest path that makes the file name unique will be used. | |
| 107 | |
| 108 FULL_PATH_NAMES = YES | |
| 109 | |
| 110 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag | |
| 111 # can be used to strip a user-defined part of the path. Stripping is | |
| 112 # only done if one of the specified strings matches the left-hand part of | |
| 113 # the path. The tag can be used to show relative paths in the file list. | |
| 114 # If left blank the directory from which doxygen is run is used as the | |
| 115 # path to strip. | |
| 116 | |
| 117 STRIP_FROM_PATH = | |
| 118 | |
| 119 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of | |
| 120 # the path mentioned in the documentation of a class, which tells | |
| 121 # the reader which header file to include in order to use a class. | |
| 122 # If left blank only the name of the header file containing the class | |
| 123 # definition is used. Otherwise one should specify the include paths that | |
| 124 # are normally passed to the compiler using the -I flag. | |
| 125 | |
| 126 STRIP_FROM_INC_PATH = | |
| 127 | |
| 128 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter | |
| 129 # (but less readable) file names. This can be useful is your file systems | |
| 130 # doesn't support long names like on DOS, Mac, or CD-ROM. | |
| 131 | |
| 132 SHORT_NAMES = NO | |
| 133 | |
| 134 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen | |
| 135 # will interpret the first line (until the first dot) of a JavaDoc-style | |
| 136 # comment as the brief description. If set to NO, the JavaDoc | |
| 137 # comments will behave just like regular Qt-style comments | |
| 138 # (thus requiring an explicit @brief command for a brief description.) | |
| 139 | |
| 140 JAVADOC_AUTOBRIEF = NO | |
| 141 | |
| 142 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will | |
| 143 # interpret the first line (until the first dot) of a Qt-style | |
| 144 # comment as the brief description. If set to NO, the comments | |
| 145 # will behave just like regular Qt-style comments (thus requiring | |
| 146 # an explicit \brief command for a brief description.) | |
| 147 | |
| 148 QT_AUTOBRIEF = NO | |
| 149 | |
| 150 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen | |
| 151 # treat a multi-line C++ special comment block (i.e. a block of //! or /// | |
| 152 # comments) as a brief description. This used to be the default behaviour. | |
| 153 # The new default is to treat a multi-line C++ comment block as a detailed | |
| 154 # description. Set this tag to YES if you prefer the old behaviour instead. | |
| 155 | |
| 156 MULTILINE_CPP_IS_BRIEF = NO | |
| 157 | |
| 158 # If the DETAILS_AT_TOP tag is set to YES then Doxygen | |
| 159 # will output the detailed description near the top, like JavaDoc. | |
| 160 # If set to NO, the detailed description appears after the member | |
| 161 # documentation. | |
| 162 | |
| 163 DETAILS_AT_TOP = NO | |
| 164 | |
| 165 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented | |
| 166 # member inherits the documentation from any documented member that it | |
| 167 # re-implements. | |
| 168 | |
| 169 INHERIT_DOCS = YES | |
| 170 | |
| 171 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce | |
| 172 # a new page for each member. If set to NO, the documentation of a member will | |
| 173 # be part of the file/class/namespace that contains it. | |
| 174 | |
| 175 SEPARATE_MEMBER_PAGES = NO | |
| 176 | |
| 177 # The TAB_SIZE tag can be used to set the number of spaces in a tab. | |
| 178 # Doxygen uses this value to replace tabs by spaces in code fragments. | |
| 179 | |
| 180 TAB_SIZE = 8 | |
| 181 | |
| 182 # This tag can be used to specify a number of aliases that acts | |
| 183 # as commands in the documentation. An alias has the form "name=value". | |
| 184 # For example adding "sideeffect=\par Side Effects:\n" will allow you to | |
| 185 # put the command \sideeffect (or @sideeffect) in the documentation, which | |
| 186 # will result in a user-defined paragraph with heading "Side Effects:". | |
| 187 # You can put \n's in the value part of an alias to insert newlines. | |
| 188 | |
| 189 ALIASES = | |
| 190 | |
| 191 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C | |
| 192 # sources only. Doxygen will then generate output that is more tailored for C. | |
| 193 # For instance, some of the names that are used will be different. The list | |
| 194 # of all members will be omitted, etc. | |
| 195 | |
| 196 OPTIMIZE_OUTPUT_FOR_C = NO | |
| 197 | |
| 198 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java | |
| 199 # sources only. Doxygen will then generate output that is more tailored for | |
| 200 # Java. For instance, namespaces will be presented as packages, qualified | |
| 201 # scopes will look different, etc. | |
| 202 | |
| 203 OPTIMIZE_OUTPUT_JAVA = NO | |
| 204 | |
| 205 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran | |
| 206 # sources only. Doxygen will then generate output that is more tailored for | |
| 207 # Fortran. | |
| 208 | |
| 209 OPTIMIZE_FOR_FORTRAN = NO | |
| 210 | |
| 211 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL | |
| 212 # sources. Doxygen will then generate output that is tailored for | |
| 213 # VHDL. | |
| 214 | |
| 215 OPTIMIZE_OUTPUT_VHDL = NO | |
| 216 | |
| 217 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want | |
| 218 # to include (a tag file for) the STL sources as input, then you should | |
| 219 # set this tag to YES in order to let doxygen match functions declarations and | |
| 220 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. | |
| 221 # func(std::string) {}). This also make the inheritance and collaboration | |
| 222 # diagrams that involve STL classes more complete and accurate. | |
| 223 | |
| 224 BUILTIN_STL_SUPPORT = NO | |
| 225 | |
| 226 # If you use Microsoft's C++/CLI language, you should set this option to YES to | |
| 227 # enable parsing support. | |
| 228 | |
| 229 CPP_CLI_SUPPORT = NO | |
| 230 | |
| 231 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. | |
| 232 # Doxygen will parse them like normal C++ but will assume all classes use public | |
| 233 # instead of private inheritance when no explicit protection keyword is present. | |
| 234 | |
| 235 SIP_SUPPORT = NO | |
| 236 | |
| 237 # For Microsoft's IDL there are propget and propput attributes to indicate getter | |
| 238 # and setter methods for a property. Setting this option to YES (the default) | |
| 239 # will make doxygen to replace the get and set methods by a property in the | |
| 240 # documentation. This will only work if the methods are indeed getting or | |
| 241 # setting a simple type. If this is not the case, or you want to show the | |
| 242 # methods anyway, you should set this option to NO. | |
| 243 | |
| 244 IDL_PROPERTY_SUPPORT = YES | |
| 245 | |
| 246 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC | |
| 247 # tag is set to YES, then doxygen will reuse the documentation of the first | |
| 248 # member in the group (if any) for the other members of the group. By default | |
| 249 # all members of a group must be documented explicitly. | |
| 250 | |
| 251 DISTRIBUTE_GROUP_DOC = NO | |
| 252 | |
| 253 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of | |
| 254 # the same type (for instance a group of public functions) to be put as a | |
| 255 # subgroup of that type (e.g. under the Public Functions section). Set it to | |
| 256 # NO to prevent subgrouping. Alternatively, this can be done per class using | |
| 257 # the \nosubgrouping command. | |
| 258 | |
| 259 SUBGROUPING = YES | |
| 260 | |
| 261 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum | |
| 262 # is documented as struct, union, or enum with the name of the typedef. So | |
| 263 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct | |
| 264 # with name TypeT. When disabled the typedef will appear as a member of a file, | |
| 265 # namespace, or class. And the struct will be named TypeS. This can typically | |
| 266 # be useful for C code in case the coding convention dictates that all compound | |
| 267 # types are typedef'ed and only the typedef is referenced, never the tag name. | |
| 268 | |
| 269 TYPEDEF_HIDES_STRUCT = NO | |
| 270 | |
| 271 #--------------------------------------------------------------------------- | |
| 272 # Build related configuration options | |
| 273 #--------------------------------------------------------------------------- | |
| 274 | |
| 275 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in | |
| 276 # documentation are documented, even if no documentation was available. | |
| 277 # Private class members and static file members will be hidden unless | |
| 278 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES | |
| 279 | |
| 280 EXTRACT_ALL = YES | |
| 281 | |
| 282 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class | |
| 283 # will be included in the documentation. | |
| 284 | |
| 285 EXTRACT_PRIVATE = YES | |
| 286 | |
| 287 # If the EXTRACT_STATIC tag is set to YES all static members of a file | |
| 288 # will be included in the documentation. | |
| 289 | |
| 290 EXTRACT_STATIC = YES | |
| 291 | |
| 292 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) | |
| 293 # defined locally in source files will be included in the documentation. | |
| 294 # If set to NO only classes defined in header files are included. | |
| 295 | |
| 296 EXTRACT_LOCAL_CLASSES = YES | |
| 297 | |
| 298 # This flag is only useful for Objective-C code. When set to YES local | |
| 299 # methods, which are defined in the implementation section but not in | |
| 300 # the interface are included in the documentation. | |
| 301 # If set to NO (the default) only methods in the interface are included. | |
| 302 | |
| 303 EXTRACT_LOCAL_METHODS = NO | |
| 304 | |
| 305 # If this flag is set to YES, the members of anonymous namespaces will be | |
| 306 # extracted and appear in the documentation as a namespace called | |
| 307 # 'anonymous_namespace{file}', where file will be replaced with the base | |
| 308 # name of the file that contains the anonymous namespace. By default | |
| 309 # anonymous namespace are hidden. | |
| 310 | |
| 311 EXTRACT_ANON_NSPACES = NO | |
| 312 | |
| 313 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all | |
| 314 # undocumented members of documented classes, files or namespaces. | |
| 315 # If set to NO (the default) these members will be included in the | |
| 316 # various overviews, but no documentation section is generated. | |
| 317 # This option has no effect if EXTRACT_ALL is enabled. | |
| 318 | |
| 319 HIDE_UNDOC_MEMBERS = NO | |
| 320 | |
| 321 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all | |
| 322 # undocumented classes that are normally visible in the class hierarchy. | |
| 323 # If set to NO (the default) these classes will be included in the various | |
| 324 # overviews. This option has no effect if EXTRACT_ALL is enabled. | |
| 325 | |
| 326 HIDE_UNDOC_CLASSES = NO | |
| 327 | |
| 328 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all | |
| 329 # friend (class|struct|union) declarations. | |
| 330 # If set to NO (the default) these declarations will be included in the | |
| 331 # documentation. | |
| 332 | |
| 333 HIDE_FRIEND_COMPOUNDS = NO | |
| 334 | |
| 335 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any | |
| 336 # documentation blocks found inside the body of a function. | |
| 337 # If set to NO (the default) these blocks will be appended to the | |
| 338 # function's detailed documentation block. | |
| 339 | |
| 340 HIDE_IN_BODY_DOCS = NO | |
| 341 | |
| 342 # The INTERNAL_DOCS tag determines if documentation | |
| 343 # that is typed after a \internal command is included. If the tag is set | |
| 344 # to NO (the default) then the documentation will be excluded. | |
| 345 # Set it to YES to include the internal documentation. | |
| 346 | |
| 347 INTERNAL_DOCS = NO | |
| 348 | |
| 349 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate | |
| 350 # file names in lower-case letters. If set to YES upper-case letters are also | |
| 351 # allowed. This is useful if you have classes or files whose names only differ | |
| 352 # in case and if your file system supports case sensitive file names. Windows | |
| 353 # and Mac users are advised to set this option to NO. | |
| 354 | |
| 355 CASE_SENSE_NAMES = YES | |
| 356 | |
| 357 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen | |
| 358 # will show members with their full class and namespace scopes in the | |
| 359 # documentation. If set to YES the scope will be hidden. | |
| 360 | |
| 361 HIDE_SCOPE_NAMES = NO | |
| 362 | |
| 363 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen | |
| 364 # will put a list of the files that are included by a file in the documentation | |
| 365 # of that file. | |
| 366 | |
| 367 SHOW_INCLUDE_FILES = YES | |
| 368 | |
| 369 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] | |
| 370 # is inserted in the documentation for inline members. | |
| 371 | |
| 372 INLINE_INFO = YES | |
| 373 | |
| 374 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen | |
| 375 # will sort the (detailed) documentation of file and class members | |
| 376 # alphabetically by member name. If set to NO the members will appear in | |
| 377 # declaration order. | |
| 378 | |
| 379 SORT_MEMBER_DOCS = YES | |
| 380 | |
| 381 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the | |
| 382 # brief documentation of file, namespace and class members alphabetically | |
| 383 # by member name. If set to NO (the default) the members will appear in | |
| 384 # declaration order. | |
| 385 | |
| 386 SORT_BRIEF_DOCS = NO | |
| 387 | |
| 388 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the | |
| 389 # hierarchy of group names into alphabetical order. If set to NO (the default) | |
| 390 # the group names will appear in their defined order. | |
| 391 | |
| 392 SORT_GROUP_NAMES = NO | |
| 393 | |
| 394 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be | |
| 395 # sorted by fully-qualified names, including namespaces. If set to | |
| 396 # NO (the default), the class list will be sorted only by class name, | |
| 397 # not including the namespace part. | |
| 398 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. | |
| 399 # Note: This option applies only to the class list, not to the | |
| 400 # alphabetical list. | |
| 401 | |
| 402 SORT_BY_SCOPE_NAME = NO | |
| 403 | |
| 404 # The GENERATE_TODOLIST tag can be used to enable (YES) or | |
| 405 # disable (NO) the todo list. This list is created by putting \todo | |
| 406 # commands in the documentation. | |
| 407 | |
| 408 GENERATE_TODOLIST = YES | |
| 409 | |
| 410 # The GENERATE_TESTLIST tag can be used to enable (YES) or | |
| 411 # disable (NO) the test list. This list is created by putting \test | |
| 412 # commands in the documentation. | |
| 413 | |
| 414 GENERATE_TESTLIST = YES | |
| 415 | |
| 416 # The GENERATE_BUGLIST tag can be used to enable (YES) or | |
| 417 # disable (NO) the bug list. This list is created by putting \bug | |
| 418 # commands in the documentation. | |
| 419 | |
| 420 GENERATE_BUGLIST = YES | |
| 421 | |
| 422 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or | |
| 423 # disable (NO) the deprecated list. This list is created by putting | |
| 424 # \deprecated commands in the documentation. | |
| 425 | |
| 426 GENERATE_DEPRECATEDLIST= YES | |
| 427 | |
| 428 # The ENABLED_SECTIONS tag can be used to enable conditional | |
| 429 # documentation sections, marked by \if sectionname ... \endif. | |
| 430 | |
| 431 ENABLED_SECTIONS = | |
| 432 | |
| 433 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines | |
| 434 # the initial value of a variable or define consists of for it to appear in | |
| 435 # the documentation. If the initializer consists of more lines than specified | |
| 436 # here it will be hidden. Use a value of 0 to hide initializers completely. | |
| 437 # The appearance of the initializer of individual variables and defines in the | |
| 438 # documentation can be controlled using \showinitializer or \hideinitializer | |
| 439 # command in the documentation regardless of this setting. | |
| 440 | |
| 441 MAX_INITIALIZER_LINES = 30 | |
| 442 | |
| 443 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated | |
| 444 # at the bottom of the documentation of classes and structs. If set to YES the | |
| 445 # list will mention the files that were used to generate the documentation. | |
| 446 | |
| 447 SHOW_USED_FILES = YES | |
| 448 | |
| 449 # If the sources in your project are distributed over multiple directories | |
| 450 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy | |
| 451 # in the documentation. The default is NO. | |
| 452 | |
| 453 SHOW_DIRECTORIES = NO | |
| 454 | |
| 455 # Set the SHOW_FILES tag to NO to disable the generation of the Files page. | |
| 456 # This will remove the Files entry from the Quick Index and from the | |
| 457 # Folder Tree View (if specified). The default is YES. | |
| 458 | |
| 459 SHOW_FILES = YES | |
| 460 | |
| 461 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the | |
| 462 # Namespaces page. This will remove the Namespaces entry from the Quick Index | |
| 463 # and from the Folder Tree View (if specified). The default is YES. | |
| 464 | |
| 465 SHOW_NAMESPACES = YES | |
| 466 | |
| 467 # The FILE_VERSION_FILTER tag can be used to specify a program or script that | |
| 468 # doxygen should invoke to get the current version for each file (typically from | |
| 469 # the version control system). Doxygen will invoke the program by executing (via | |
| 470 # popen()) the command <command> <input-file>, where <command> is the value of | |
| 471 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file | |
| 472 # provided by doxygen. Whatever the program writes to standard output | |
| 473 # is used as the file version. See the manual for examples. | |
| 474 | |
| 475 FILE_VERSION_FILTER = | |
| 476 | |
| 477 #--------------------------------------------------------------------------- | |
| 478 # configuration options related to warning and progress messages | |
| 479 #--------------------------------------------------------------------------- | |
| 480 | |
| 481 # The QUIET tag can be used to turn on/off the messages that are generated | |
| 482 # by doxygen. Possible values are YES and NO. If left blank NO is used. | |
| 483 | |
| 484 QUIET = NO | |
| 485 | |
| 486 # The WARNINGS tag can be used to turn on/off the warning messages that are | |
| 487 # generated by doxygen. Possible values are YES and NO. If left blank | |
| 488 # NO is used. | |
| 489 | |
| 490 WARNINGS = YES | |
| 491 | |
| 492 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings | |
| 493 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will | |
| 494 # automatically be disabled. | |
| 495 | |
| 496 WARN_IF_UNDOCUMENTED = YES | |
| 497 | |
| 498 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for | |
| 499 # potential errors in the documentation, such as not documenting some | |
| 500 # parameters in a documented function, or documenting parameters that | |
| 501 # don't exist or using markup commands wrongly. | |
| 502 | |
| 503 WARN_IF_DOC_ERROR = YES | |
| 504 | |
| 505 # This WARN_NO_PARAMDOC option can be abled to get warnings for | |
| 506 # functions that are documented, but have no documentation for their parameters | |
| 507 # or return value. If set to NO (the default) doxygen will only warn about | |
| 508 # wrong or incomplete parameter documentation, but not about the absence of | |
| 509 # documentation. | |
| 510 | |
| 511 WARN_NO_PARAMDOC = NO | |
| 512 | |
| 513 # The WARN_FORMAT tag determines the format of the warning messages that | |
| 514 # doxygen can produce. The string should contain the $file, $line, and $text | |
| 515 # tags, which will be replaced by the file and line number from which the | |
| 516 # warning originated and the warning text. Optionally the format may contain | |
| 517 # $version, which will be replaced by the version of the file (if it could | |
| 518 # be obtained via FILE_VERSION_FILTER) | |
| 519 | |
| 520 WARN_FORMAT = "$file:$line: $text" | |
| 521 | |
| 522 # The WARN_LOGFILE tag can be used to specify a file to which warning | |
| 523 # and error messages should be written. If left blank the output is written | |
| 524 # to stderr. | |
| 525 | |
| 526 WARN_LOGFILE = | |
| 527 | |
| 528 #--------------------------------------------------------------------------- | |
| 529 # configuration options related to the input files | |
| 530 #--------------------------------------------------------------------------- | |
| 531 | |
| 532 # The INPUT tag can be used to specify the files and/or directories that contain | |
| 533 # documented source files. You may enter file names like "myfile.cpp" or | |
| 534 # directories like "/usr/src/myproject". Separate the files or directories | |
| 535 # with spaces. | |
| 536 | |
|
684
b346e4699e55
Add more comment for JS binding
Thinker K.F. Li <thinker@branda.to>
parents:
269
diff
changeset
|
537 INPUT = src tools include dox README.h COPYING.h nodejs |
| 2 | 538 |
| 539 # This tag can be used to specify the character encoding of the source files | |
| 540 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is | |
| 541 # also the default input encoding. Doxygen uses libiconv (or the iconv built | |
| 542 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for | |
| 543 # the list of possible encodings. | |
| 544 | |
| 545 INPUT_ENCODING = UTF-8 | |
| 546 | |
| 547 # If the value of the INPUT tag contains directories, you can use the | |
| 548 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp | |
| 549 # and *.h) to filter out the source-files in the directories. If left | |
| 550 # blank the following patterns are tested: | |
| 551 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx | |
| 552 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 | |
| 553 | |
| 554 FILE_PATTERNS = | |
| 555 | |
| 556 # The RECURSIVE tag can be used to turn specify whether or not subdirectories | |
| 557 # should be searched for input files as well. Possible values are YES and NO. | |
| 558 # If left blank NO is used. | |
| 559 | |
| 560 RECURSIVE = YES | |
| 561 | |
| 562 # The EXCLUDE tag can be used to specify files and/or directories that should | |
| 563 # excluded from the INPUT source files. This way you can easily exclude a | |
| 564 # subdirectory from a directory tree whose root is specified with the INPUT tag. | |
| 565 | |
| 566 EXCLUDE = doc | |
| 567 | |
| 568 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or | |
| 569 # directories that are symbolic links (a Unix filesystem feature) are excluded | |
| 570 # from the input. | |
| 571 | |
| 572 EXCLUDE_SYMLINKS = NO | |
| 573 | |
| 574 # If the value of the INPUT tag contains directories, you can use the | |
| 575 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude | |
| 576 # certain files from those directories. Note that the wildcards are matched | |
| 577 # against the file with absolute path, so to exclude all test directories | |
| 578 # for example use the pattern */test/* | |
| 579 | |
| 580 EXCLUDE_PATTERNS = | |
| 581 | |
| 582 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names | |
| 583 # (namespaces, classes, functions, etc.) that should be excluded from the | |
| 584 # output. The symbol name can be a fully qualified name, a word, or if the | |
| 585 # wildcard * is used, a substring. Examples: ANamespace, AClass, | |
| 586 # AClass::ANamespace, ANamespace::*Test | |
| 587 | |
| 588 EXCLUDE_SYMBOLS = | |
| 589 | |
| 590 # The EXAMPLE_PATH tag can be used to specify one or more files or | |
| 591 # directories that contain example code fragments that are included (see | |
| 592 # the \include command). | |
| 593 | |
| 117 | 594 EXAMPLE_PATH = examples/ |
| 2 | 595 |
| 596 # If the value of the EXAMPLE_PATH tag contains directories, you can use the | |
| 597 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp | |
| 598 # and *.h) to filter out the source-files in the directories. If left | |
| 599 # blank all files are included. | |
| 600 | |
| 601 EXAMPLE_PATTERNS = | |
| 602 | |
| 603 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be | |
| 604 # searched for input files to be used with the \include or \dontinclude | |
| 605 # commands irrespective of the value of the RECURSIVE tag. | |
| 606 # Possible values are YES and NO. If left blank NO is used. | |
| 607 | |
| 608 EXAMPLE_RECURSIVE = NO | |
| 609 | |
| 610 # The IMAGE_PATH tag can be used to specify one or more files or | |
| 611 # directories that contain image that are included in the documentation (see | |
| 612 # the \image command). | |
| 613 | |
| 101 | 614 IMAGE_PATH = img |
| 2 | 615 |
| 616 # The INPUT_FILTER tag can be used to specify a program that doxygen should | |
| 617 # invoke to filter for each input file. Doxygen will invoke the filter program | |
| 618 # by executing (via popen()) the command <filter> <input-file>, where <filter> | |
| 619 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an | |
| 620 # input file. Doxygen will then use the output that the filter program writes | |
| 621 # to standard output. If FILTER_PATTERNS is specified, this tag will be | |
| 622 # ignored. | |
| 623 | |
| 624 INPUT_FILTER = | |
| 625 | |
| 626 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern | |
| 627 # basis. Doxygen will compare the file name with each pattern and apply the | |
| 628 # filter if there is a match. The filters are a list of the form: | |
| 629 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further | |
| 630 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER | |
| 631 # is applied to all files. | |
| 632 | |
| 633 FILTER_PATTERNS = | |
| 634 | |
| 635 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using | |
| 636 # INPUT_FILTER) will be used to filter the input files when producing source | |
| 637 # files to browse (i.e. when SOURCE_BROWSER is set to YES). | |
| 638 | |
| 639 FILTER_SOURCE_FILES = NO | |
| 640 | |
| 641 #--------------------------------------------------------------------------- | |
| 642 # configuration options related to source browsing | |
| 643 #--------------------------------------------------------------------------- | |
| 644 | |
| 645 # If the SOURCE_BROWSER tag is set to YES then a list of source files will | |
| 646 # be generated. Documented entities will be cross-referenced with these sources. | |
| 647 # Note: To get rid of all source code in the generated output, make sure also | |
| 648 # VERBATIM_HEADERS is set to NO. | |
| 649 | |
| 110 | 650 SOURCE_BROWSER = YES |
| 2 | 651 |
| 652 # Setting the INLINE_SOURCES tag to YES will include the body | |
| 653 # of functions and classes directly in the documentation. | |
| 654 | |
| 655 INLINE_SOURCES = NO | |
| 656 | |
| 657 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct | |
| 658 # doxygen to hide any special comment blocks from generated source code | |
| 659 # fragments. Normal C and C++ comments will always remain visible. | |
| 660 | |
| 110 | 661 STRIP_CODE_COMMENTS = NO |
| 2 | 662 |
| 663 # If the REFERENCED_BY_RELATION tag is set to YES | |
| 664 # then for each documented function all documented | |
| 665 # functions referencing it will be listed. | |
| 666 | |
| 667 REFERENCED_BY_RELATION = NO | |
| 668 | |
| 669 # If the REFERENCES_RELATION tag is set to YES | |
| 670 # then for each documented function all documented entities | |
| 671 # called/used by that function will be listed. | |
| 672 | |
| 673 REFERENCES_RELATION = NO | |
| 674 | |
| 675 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default) | |
| 676 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from | |
| 677 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will | |
| 678 # link to the source code. Otherwise they will link to the documentstion. | |
| 679 | |
| 680 REFERENCES_LINK_SOURCE = YES | |
| 681 | |
| 682 # If the USE_HTAGS tag is set to YES then the references to source code | |
| 683 # will point to the HTML generated by the htags(1) tool instead of doxygen | |
| 684 # built-in source browser. The htags tool is part of GNU's global source | |
| 685 # tagging system (see http://www.gnu.org/software/global/global.html). You | |
| 686 # will need version 4.8.6 or higher. | |
| 687 | |
| 688 USE_HTAGS = NO | |
| 689 | |
| 690 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen | |
| 691 # will generate a verbatim copy of the header file for each class for | |
| 692 # which an include is specified. Set to NO to disable this. | |
| 693 | |
| 694 VERBATIM_HEADERS = YES | |
| 695 | |
| 696 #--------------------------------------------------------------------------- | |
| 697 # configuration options related to the alphabetical class index | |
| 698 #--------------------------------------------------------------------------- | |
| 699 | |
| 700 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index | |
| 701 # of all compounds will be generated. Enable this if the project | |
| 702 # contains a lot of classes, structs, unions or interfaces. | |
| 703 | |
| 704 ALPHABETICAL_INDEX = NO | |
| 705 | |
| 706 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then | |
| 707 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns | |
| 708 # in which this list will be split (can be a number in the range [1..20]) | |
| 709 | |
| 710 COLS_IN_ALPHA_INDEX = 5 | |
| 711 | |
| 712 # In case all classes in a project start with a common prefix, all | |
| 713 # classes will be put under the same header in the alphabetical index. | |
| 714 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that | |
| 715 # should be ignored while generating the index headers. | |
| 716 | |
| 235 | 717 IGNORE_PREFIX = |
| 2 | 718 |
| 719 #--------------------------------------------------------------------------- | |
| 720 # configuration options related to the HTML output | |
| 721 #--------------------------------------------------------------------------- | |
| 722 | |
| 723 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will | |
| 724 # generate HTML output. | |
| 725 | |
| 726 GENERATE_HTML = YES | |
| 727 | |
| 728 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. | |
| 729 # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
| 730 # put in front of it. If left blank `html' will be used as the default path. | |
| 731 | |
| 732 HTML_OUTPUT = html | |
| 733 | |
| 734 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for | |
| 735 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank | |
| 736 # doxygen will generate files with .html extension. | |
| 737 | |
| 738 HTML_FILE_EXTENSION = .html | |
| 739 | |
| 740 # The HTML_HEADER tag can be used to specify a personal HTML header for | |
| 741 # each generated HTML page. If it is left blank doxygen will generate a | |
| 742 # standard header. | |
| 743 | |
| 744 HTML_HEADER = | |
| 745 | |
| 746 # The HTML_FOOTER tag can be used to specify a personal HTML footer for | |
| 747 # each generated HTML page. If it is left blank doxygen will generate a | |
| 748 # standard footer. | |
| 749 | |
| 235 | 750 HTML_FOOTER = |
| 2 | 751 |
| 752 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading | |
| 753 # style sheet that is used by each HTML page. It can be used to | |
| 754 # fine-tune the look of the HTML output. If the tag is left blank doxygen | |
| 755 # will generate a default style sheet. Note that doxygen will try to copy | |
| 756 # the style sheet file to the HTML output directory, so don't put your own | |
| 757 # stylesheet in the HTML output directory as well, or it will be erased! | |
| 758 | |
| 759 HTML_STYLESHEET = | |
| 760 | |
| 761 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, | |
| 762 # files or namespaces will be aligned in HTML using tables. If set to | |
| 763 # NO a bullet list will be used. | |
| 764 | |
| 765 HTML_ALIGN_MEMBERS = YES | |
| 766 | |
| 767 # If the GENERATE_HTMLHELP tag is set to YES, additional index files | |
| 768 # will be generated that can be used as input for tools like the | |
| 769 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm) | |
| 770 # of the generated HTML documentation. | |
| 771 | |
| 772 GENERATE_HTMLHELP = NO | |
| 773 | |
| 774 # If the GENERATE_DOCSET tag is set to YES, additional index files | |
| 775 # will be generated that can be used as input for Apple's Xcode 3 | |
| 776 # integrated development environment, introduced with OSX 10.5 (Leopard). | |
| 777 # To create a documentation set, doxygen will generate a Makefile in the | |
| 778 # HTML output directory. Running make will produce the docset in that | |
| 779 # directory and running "make install" will install the docset in | |
| 780 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find | |
| 781 # it at startup. | |
| 782 | |
| 783 GENERATE_DOCSET = NO | |
| 784 | |
| 785 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the | |
| 786 # feed. A documentation feed provides an umbrella under which multiple | |
| 787 # documentation sets from a single provider (such as a company or product suite) | |
| 788 # can be grouped. | |
| 789 | |
| 790 DOCSET_FEEDNAME = "Doxygen generated docs" | |
| 791 | |
| 792 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that | |
| 793 # should uniquely identify the documentation set bundle. This should be a | |
| 794 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen | |
| 795 # will append .docset to the name. | |
| 796 | |
| 797 DOCSET_BUNDLE_ID = org.doxygen.Project | |
| 798 | |
| 799 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML | |
| 800 # documentation will contain sections that can be hidden and shown after the | |
| 801 # page has loaded. For this to work a browser that supports | |
| 802 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox | |
| 803 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). | |
| 804 | |
| 805 HTML_DYNAMIC_SECTIONS = NO | |
| 806 | |
| 807 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can | |
| 808 # be used to specify the file name of the resulting .chm file. You | |
| 809 # can add a path in front of the file if the result should not be | |
| 810 # written to the html output directory. | |
| 811 | |
| 812 CHM_FILE = | |
| 813 | |
| 814 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can | |
| 815 # be used to specify the location (absolute path including file name) of | |
| 816 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run | |
| 817 # the HTML help compiler on the generated index.hhp. | |
| 818 | |
| 819 HHC_LOCATION = | |
| 820 | |
| 821 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag | |
| 822 # controls if a separate .chi index file is generated (YES) or that | |
| 823 # it should be included in the master .chm file (NO). | |
| 824 | |
| 825 GENERATE_CHI = NO | |
| 826 | |
| 827 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING | |
| 828 # is used to encode HtmlHelp index (hhk), content (hhc) and project file | |
| 829 # content. | |
| 830 | |
| 831 CHM_INDEX_ENCODING = | |
| 832 | |
| 833 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag | |
| 834 # controls whether a binary table of contents is generated (YES) or a | |
| 835 # normal table of contents (NO) in the .chm file. | |
| 836 | |
| 837 BINARY_TOC = NO | |
| 838 | |
| 839 # The TOC_EXPAND flag can be set to YES to add extra items for group members | |
| 840 # to the contents of the HTML help documentation and to the tree view. | |
| 841 | |
| 842 TOC_EXPAND = NO | |
| 843 | |
| 844 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at | |
| 845 # top of each HTML page. The value NO (the default) enables the index and | |
| 846 # the value YES disables it. | |
| 847 | |
| 848 DISABLE_INDEX = NO | |
| 849 | |
| 850 # This tag can be used to set the number of enum values (range [1..20]) | |
| 851 # that doxygen will group on one line in the generated HTML documentation. | |
| 852 | |
| 853 ENUM_VALUES_PER_LINE = 4 | |
| 854 | |
| 855 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index | |
| 856 # structure should be generated to display hierarchical information. | |
| 857 # If the tag value is set to FRAME, a side panel will be generated | |
| 858 # containing a tree-like index structure (just like the one that | |
| 859 # is generated for HTML Help). For this to work a browser that supports | |
| 860 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, | |
| 861 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are | |
| 862 # probably better off using the HTML help feature. Other possible values | |
| 863 # for this tag are: HIERARCHIES, which will generate the Groups, Directories, | |
| 864 # and Class Hiererachy pages using a tree view instead of an ordered list; | |
| 865 # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which | |
| 866 # disables this behavior completely. For backwards compatibility with previous | |
| 867 # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE | |
| 868 # respectively. | |
| 869 | |
| 870 GENERATE_TREEVIEW = NONE | |
| 871 | |
| 872 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be | |
| 873 # used to set the initial width (in pixels) of the frame in which the tree | |
| 874 # is shown. | |
| 875 | |
| 876 TREEVIEW_WIDTH = 250 | |
| 877 | |
| 878 # Use this tag to change the font size of Latex formulas included | |
| 879 # as images in the HTML documentation. The default is 10. Note that | |
| 880 # when you change the font size after a successful doxygen run you need | |
| 881 # to manually remove any form_*.png images from the HTML output directory | |
| 882 # to force them to be regenerated. | |
| 883 | |
| 884 FORMULA_FONTSIZE = 10 | |
| 885 | |
| 886 #--------------------------------------------------------------------------- | |
| 887 # configuration options related to the LaTeX output | |
| 888 #--------------------------------------------------------------------------- | |
| 889 | |
| 890 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will | |
| 891 # generate Latex output. | |
| 892 | |
| 893 GENERATE_LATEX = YES | |
| 894 | |
| 895 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. | |
| 896 # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
| 897 # put in front of it. If left blank `latex' will be used as the default path. | |
| 898 | |
| 899 LATEX_OUTPUT = latex | |
| 900 | |
| 901 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be | |
| 902 # invoked. If left blank `latex' will be used as the default command name. | |
| 903 | |
| 904 LATEX_CMD_NAME = latex | |
| 905 | |
| 906 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to | |
| 907 # generate index for LaTeX. If left blank `makeindex' will be used as the | |
| 908 # default command name. | |
| 909 | |
| 910 MAKEINDEX_CMD_NAME = makeindex | |
| 911 | |
| 912 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact | |
| 913 # LaTeX documents. This may be useful for small projects and may help to | |
| 914 # save some trees in general. | |
| 915 | |
| 916 COMPACT_LATEX = NO | |
| 917 | |
| 918 # The PAPER_TYPE tag can be used to set the paper type that is used | |
| 919 # by the printer. Possible values are: a4, a4wide, letter, legal and | |
| 920 # executive. If left blank a4wide will be used. | |
| 921 | |
| 922 PAPER_TYPE = a4wide | |
| 923 | |
| 924 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX | |
| 925 # packages that should be included in the LaTeX output. | |
| 926 | |
| 927 EXTRA_PACKAGES = | |
| 928 | |
| 929 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for | |
| 930 # the generated latex document. The header should contain everything until | |
| 931 # the first chapter. If it is left blank doxygen will generate a | |
| 932 # standard header. Notice: only use this tag if you know what you are doing! | |
| 933 | |
| 934 LATEX_HEADER = | |
| 935 | |
| 936 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated | |
| 937 # is prepared for conversion to pdf (using ps2pdf). The pdf file will | |
| 938 # contain links (just like the HTML output) instead of page references | |
| 939 # This makes the output suitable for online browsing using a pdf viewer. | |
| 940 | |
| 941 PDF_HYPERLINKS = YES | |
| 942 | |
| 943 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of | |
| 944 # plain latex in the generated Makefile. Set this option to YES to get a | |
| 945 # higher quality PDF documentation. | |
| 946 | |
| 947 USE_PDFLATEX = YES | |
| 948 | |
| 949 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. | |
| 950 # command to the generated LaTeX files. This will instruct LaTeX to keep | |
| 951 # running if errors occur, instead of asking the user for help. | |
| 952 # This option is also used when generating formulas in HTML. | |
| 953 | |
| 954 LATEX_BATCHMODE = NO | |
| 955 | |
| 956 # If LATEX_HIDE_INDICES is set to YES then doxygen will not | |
| 957 # include the index chapters (such as File Index, Compound Index, etc.) | |
| 958 # in the output. | |
| 959 | |
| 960 LATEX_HIDE_INDICES = NO | |
| 961 | |
| 962 #--------------------------------------------------------------------------- | |
| 963 # configuration options related to the RTF output | |
| 964 #--------------------------------------------------------------------------- | |
| 965 | |
| 966 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output | |
| 967 # The RTF output is optimized for Word 97 and may not look very pretty with | |
| 968 # other RTF readers or editors. | |
| 969 | |
| 970 GENERATE_RTF = NO | |
| 971 | |
| 972 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. | |
| 973 # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
| 974 # put in front of it. If left blank `rtf' will be used as the default path. | |
| 975 | |
| 976 RTF_OUTPUT = rtf | |
| 977 | |
| 978 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact | |
| 979 # RTF documents. This may be useful for small projects and may help to | |
| 980 # save some trees in general. | |
| 981 | |
| 982 COMPACT_RTF = NO | |
| 983 | |
| 984 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated | |
| 985 # will contain hyperlink fields. The RTF file will | |
| 986 # contain links (just like the HTML output) instead of page references. | |
| 987 # This makes the output suitable for online browsing using WORD or other | |
| 988 # programs which support those fields. | |
| 989 # Note: wordpad (write) and others do not support links. | |
| 990 | |
| 991 RTF_HYPERLINKS = NO | |
| 992 | |
| 993 # Load stylesheet definitions from file. Syntax is similar to doxygen's | |
| 994 # config file, i.e. a series of assignments. You only have to provide | |
| 995 # replacements, missing definitions are set to their default value. | |
| 996 | |
| 997 RTF_STYLESHEET_FILE = | |
| 998 | |
| 999 # Set optional variables used in the generation of an rtf document. | |
| 1000 # Syntax is similar to doxygen's config file. | |
| 1001 | |
| 1002 RTF_EXTENSIONS_FILE = | |
| 1003 | |
| 1004 #--------------------------------------------------------------------------- | |
| 1005 # configuration options related to the man page output | |
| 1006 #--------------------------------------------------------------------------- | |
| 1007 | |
| 1008 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will | |
| 1009 # generate man pages | |
| 1010 | |
| 1011 GENERATE_MAN = NO | |
| 1012 | |
| 1013 # The MAN_OUTPUT tag is used to specify where the man pages will be put. | |
| 1014 # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
| 1015 # put in front of it. If left blank `man' will be used as the default path. | |
| 1016 | |
| 1017 MAN_OUTPUT = man | |
| 1018 | |
| 1019 # The MAN_EXTENSION tag determines the extension that is added to | |
| 1020 # the generated man pages (default is the subroutine's section .3) | |
| 1021 | |
| 1022 MAN_EXTENSION = .3 | |
| 1023 | |
| 1024 # If the MAN_LINKS tag is set to YES and Doxygen generates man output, | |
| 1025 # then it will generate one additional man file for each entity | |
| 1026 # documented in the real man page(s). These additional files | |
| 1027 # only source the real man page, but without them the man command | |
| 1028 # would be unable to find the correct page. The default is NO. | |
| 1029 | |
| 1030 MAN_LINKS = NO | |
| 1031 | |
| 1032 #--------------------------------------------------------------------------- | |
| 1033 # configuration options related to the XML output | |
| 1034 #--------------------------------------------------------------------------- | |
| 1035 | |
| 1036 # If the GENERATE_XML tag is set to YES Doxygen will | |
| 1037 # generate an XML file that captures the structure of | |
| 1038 # the code including all documentation. | |
| 1039 | |
| 1040 GENERATE_XML = NO | |
| 1041 | |
| 1042 # The XML_OUTPUT tag is used to specify where the XML pages will be put. | |
| 1043 # If a relative path is entered the value of OUTPUT_DIRECTORY will be | |
| 1044 # put in front of it. If left blank `xml' will be used as the default path. | |
| 1045 | |
| 1046 XML_OUTPUT = xml | |
| 1047 | |
| 1048 # The XML_SCHEMA tag can be used to specify an XML schema, | |
| 1049 # which can be used by a validating XML parser to check the | |
| 1050 # syntax of the XML files. | |
| 1051 | |
| 1052 XML_SCHEMA = | |
| 1053 | |
| 1054 # The XML_DTD tag can be used to specify an XML DTD, | |
| 1055 # which can be used by a validating XML parser to check the | |
| 1056 # syntax of the XML files. | |
| 1057 | |
| 1058 XML_DTD = | |
| 1059 | |
| 1060 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will | |
| 1061 # dump the program listings (including syntax highlighting | |
| 1062 # and cross-referencing information) to the XML output. Note that | |
| 1063 # enabling this will significantly increase the size of the XML output. | |
| 1064 | |
| 1065 XML_PROGRAMLISTING = YES | |
| 1066 | |
| 1067 #--------------------------------------------------------------------------- | |
| 1068 # configuration options for the AutoGen Definitions output | |
| 1069 #--------------------------------------------------------------------------- | |
| 1070 | |
| 1071 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will | |
| 1072 # generate an AutoGen Definitions (see autogen.sf.net) file | |
| 1073 # that captures the structure of the code including all | |
| 1074 # documentation. Note that this feature is still experimental | |
| 1075 # and incomplete at the moment. | |
| 1076 | |
| 1077 GENERATE_AUTOGEN_DEF = NO | |
| 1078 | |
| 1079 #--------------------------------------------------------------------------- | |
| 1080 # configuration options related to the Perl module output | |
| 1081 #--------------------------------------------------------------------------- | |
| 1082 | |
| 1083 # If the GENERATE_PERLMOD tag is set to YES Doxygen will | |
| 1084 # generate a Perl module file that captures the structure of | |
| 1085 # the code including all documentation. Note that this | |
| 1086 # feature is still experimental and incomplete at the | |
| 1087 # moment. | |
| 1088 | |
| 1089 GENERATE_PERLMOD = NO | |
| 1090 | |
| 1091 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate | |
| 1092 # the necessary Makefile rules, Perl scripts and LaTeX code to be able | |
| 1093 # to generate PDF and DVI output from the Perl module output. | |
| 1094 | |
| 1095 PERLMOD_LATEX = NO | |
| 1096 | |
| 1097 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be | |
| 1098 # nicely formatted so it can be parsed by a human reader. This is useful | |
| 1099 # if you want to understand what is going on. On the other hand, if this | |
| 1100 # tag is set to NO the size of the Perl module output will be much smaller | |
| 1101 # and Perl will parse it just the same. | |
| 1102 | |
| 1103 PERLMOD_PRETTY = YES | |
| 1104 | |
| 1105 # The names of the make variables in the generated doxyrules.make file | |
| 1106 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. | |
| 1107 # This is useful so different doxyrules.make files included by the same | |
| 1108 # Makefile don't overwrite each other's variables. | |
| 1109 | |
| 1110 PERLMOD_MAKEVAR_PREFIX = | |
| 1111 | |
| 1112 #--------------------------------------------------------------------------- | |
| 1113 # Configuration options related to the preprocessor | |
| 1114 #--------------------------------------------------------------------------- | |
| 1115 | |
| 1116 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will | |
| 1117 # evaluate all C-preprocessor directives found in the sources and include | |
| 1118 # files. | |
| 1119 | |
| 1120 ENABLE_PREPROCESSING = YES | |
| 1121 | |
| 1122 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro | |
| 1123 # names in the source code. If set to NO (the default) only conditional | |
| 1124 # compilation will be performed. Macro expansion can be done in a controlled | |
| 1125 # way by setting EXPAND_ONLY_PREDEF to YES. | |
| 1126 | |
| 1127 MACRO_EXPANSION = NO | |
| 1128 | |
| 1129 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES | |
| 1130 # then the macro expansion is limited to the macros specified with the | |
| 1131 # PREDEFINED and EXPAND_AS_DEFINED tags. | |
| 1132 | |
| 1133 EXPAND_ONLY_PREDEF = NO | |
| 1134 | |
| 1135 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files | |
| 1136 # in the INCLUDE_PATH (see below) will be search if a #include is found. | |
| 1137 | |
| 1138 SEARCH_INCLUDES = YES | |
| 1139 | |
| 1140 # The INCLUDE_PATH tag can be used to specify one or more directories that | |
| 1141 # contain include files that are not input files but should be processed by | |
| 1142 # the preprocessor. | |
| 1143 | |
| 1144 INCLUDE_PATH = | |
| 1145 | |
| 1146 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard | |
| 1147 # patterns (like *.h and *.hpp) to filter out the header-files in the | |
| 1148 # directories. If left blank, the patterns specified with FILE_PATTERNS will | |
| 1149 # be used. | |
| 1150 | |
| 1151 INCLUDE_FILE_PATTERNS = | |
| 1152 | |
| 1153 # The PREDEFINED tag can be used to specify one or more macro names that | |
| 1154 # are defined before the preprocessor is started (similar to the -D option of | |
| 1155 # gcc). The argument of the tag is a list of macros of the form: name | |
| 1156 # or name=definition (no spaces). If the definition and the = are | |
| 1157 # omitted =1 is assumed. To prevent a macro definition from being | |
| 1158 # undefined via #undef or recursively expanded use the := operator | |
| 1159 # instead of the = operator. | |
| 1160 | |
| 1161 PREDEFINED = | |
| 1162 | |
| 1163 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then | |
| 1164 # this tag can be used to specify a list of macro names that should be expanded. | |
| 1165 # The macro definition that is found in the sources will be used. | |
| 1166 # Use the PREDEFINED tag if you want to use a different macro definition. | |
| 1167 | |
| 1168 EXPAND_AS_DEFINED = | |
| 1169 | |
| 1170 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then | |
| 1171 # doxygen's preprocessor will remove all function-like macros that are alone | |
| 1172 # on a line, have an all uppercase name, and do not end with a semicolon. Such | |
| 1173 # function macros are typically used for boiler-plate code, and will confuse | |
| 1174 # the parser if not removed. | |
| 1175 | |
| 1176 SKIP_FUNCTION_MACROS = YES | |
| 1177 | |
| 1178 #--------------------------------------------------------------------------- | |
| 1179 # Configuration::additions related to external references | |
| 1180 #--------------------------------------------------------------------------- | |
| 1181 | |
| 1182 # The TAGFILES option can be used to specify one or more tagfiles. | |
| 1183 # Optionally an initial location of the external documentation | |
| 1184 # can be added for each tagfile. The format of a tag file without | |
| 1185 # this location is as follows: | |
| 1186 # TAGFILES = file1 file2 ... | |
| 1187 # Adding location for the tag files is done as follows: | |
| 1188 # TAGFILES = file1=loc1 "file2 = loc2" ... | |
| 1189 # where "loc1" and "loc2" can be relative or absolute paths or | |
| 1190 # URLs. If a location is present for each tag, the installdox tool | |
| 1191 # does not have to be run to correct the links. | |
| 1192 # Note that each tag file must have a unique name | |
| 1193 # (where the name does NOT include the path) | |
| 1194 # If a tag file is not located in the directory in which doxygen | |
| 1195 # is run, you must also specify the path to the tagfile here. | |
| 1196 | |
| 1197 TAGFILES = | |
| 1198 | |
| 1199 # When a file name is specified after GENERATE_TAGFILE, doxygen will create | |
| 1200 # a tag file that is based on the input files it reads. | |
| 1201 | |
| 1202 GENERATE_TAGFILE = | |
| 1203 | |
| 1204 # If the ALLEXTERNALS tag is set to YES all external classes will be listed | |
| 1205 # in the class index. If set to NO only the inherited external classes | |
| 1206 # will be listed. | |
| 1207 | |
| 1208 ALLEXTERNALS = NO | |
| 1209 | |
| 1210 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed | |
| 1211 # in the modules index. If set to NO, only the current project's groups will | |
| 1212 # be listed. | |
| 1213 | |
| 1214 EXTERNAL_GROUPS = YES | |
| 1215 | |
| 1216 # The PERL_PATH should be the absolute path and name of the perl script | |
| 1217 # interpreter (i.e. the result of `which perl'). | |
| 1218 | |
| 1219 PERL_PATH = /usr/bin/perl | |
| 1220 | |
| 1221 #--------------------------------------------------------------------------- | |
| 1222 # Configuration options related to the dot tool | |
| 1223 #--------------------------------------------------------------------------- | |
| 1224 | |
| 1225 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will | |
| 1226 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base | |
| 1227 # or super classes. Setting the tag to NO turns the diagrams off. Note that | |
| 1228 # this option is superseded by the HAVE_DOT option below. This is only a | |
| 1229 # fallback. It is recommended to install and use dot, since it yields more | |
| 1230 # powerful graphs. | |
| 1231 | |
| 1232 CLASS_DIAGRAMS = YES | |
| 1233 | |
| 1234 # You can define message sequence charts within doxygen comments using the \msc | |
| 1235 # command. Doxygen will then run the mscgen tool (see | |
| 1236 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the | |
| 1237 # documentation. The MSCGEN_PATH tag allows you to specify the directory where | |
| 1238 # the mscgen tool resides. If left empty the tool is assumed to be found in the | |
| 1239 # default search path. | |
| 1240 | |
| 1241 MSCGEN_PATH = | |
| 1242 | |
| 1243 # If set to YES, the inheritance and collaboration graphs will hide | |
| 1244 # inheritance and usage relations if the target is undocumented | |
| 1245 # or is not a class. | |
| 1246 | |
| 1247 HIDE_UNDOC_RELATIONS = YES | |
| 1248 | |
| 1249 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is | |
| 1250 # available from the path. This tool is part of Graphviz, a graph visualization | |
| 1251 # toolkit from AT&T and Lucent Bell Labs. The other options in this section | |
| 1252 # have no effect if this option is set to NO (the default) | |
| 1253 | |
| 1254 HAVE_DOT = NO | |
| 1255 | |
| 1256 # By default doxygen will write a font called FreeSans.ttf to the output | |
| 1257 # directory and reference it in all dot files that doxygen generates. This | |
| 1258 # font does not include all possible unicode characters however, so when you need | |
| 1259 # these (or just want a differently looking font) you can specify the font name | |
| 1260 # using DOT_FONTNAME. You need need to make sure dot is able to find the font, | |
| 1261 # which can be done by putting it in a standard location or by setting the | |
| 1262 # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory | |
| 1263 # containing the font. | |
| 1264 | |
| 1265 DOT_FONTNAME = FreeSans | |
| 1266 | |
| 1267 # By default doxygen will tell dot to use the output directory to look for the | |
| 1268 # FreeSans.ttf font (which doxygen will put there itself). If you specify a | |
| 1269 # different font using DOT_FONTNAME you can set the path where dot | |
| 1270 # can find it using this tag. | |
| 1271 | |
| 1272 DOT_FONTPATH = | |
| 1273 | |
| 1274 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen | |
| 1275 # will generate a graph for each documented class showing the direct and | |
| 1276 # indirect inheritance relations. Setting this tag to YES will force the | |
| 1277 # the CLASS_DIAGRAMS tag to NO. | |
| 1278 | |
| 1279 CLASS_GRAPH = YES | |
| 1280 | |
| 1281 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen | |
| 1282 # will generate a graph for each documented class showing the direct and | |
| 1283 # indirect implementation dependencies (inheritance, containment, and | |
| 1284 # class references variables) of the class with other documented classes. | |
| 1285 | |
| 1286 COLLABORATION_GRAPH = YES | |
| 1287 | |
| 1288 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen | |
| 1289 # will generate a graph for groups, showing the direct groups dependencies | |
| 1290 | |
| 1291 GROUP_GRAPHS = YES | |
| 1292 | |
| 1293 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and | |
| 1294 # collaboration diagrams in a style similar to the OMG's Unified Modeling | |
| 1295 # Language. | |
| 1296 | |
| 1297 UML_LOOK = NO | |
| 1298 | |
| 1299 # If set to YES, the inheritance and collaboration graphs will show the | |
| 1300 # relations between templates and their instances. | |
| 1301 | |
| 1302 TEMPLATE_RELATIONS = NO | |
| 1303 | |
| 1304 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT | |
| 1305 # tags are set to YES then doxygen will generate a graph for each documented | |
| 1306 # file showing the direct and indirect include dependencies of the file with | |
| 1307 # other documented files. | |
| 1308 | |
| 1309 INCLUDE_GRAPH = YES | |
| 1310 | |
| 1311 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and | |
| 1312 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each | |
| 1313 # documented header file showing the documented files that directly or | |
| 1314 # indirectly include this file. | |
| 1315 | |
| 1316 INCLUDED_BY_GRAPH = YES | |
| 1317 | |
| 1318 # If the CALL_GRAPH and HAVE_DOT options are set to YES then | |
| 1319 # doxygen will generate a call dependency graph for every global function | |
| 1320 # or class method. Note that enabling this option will significantly increase | |
| 1321 # the time of a run. So in most cases it will be better to enable call graphs | |
| 1322 # for selected functions only using the \callgraph command. | |
| 1323 | |
| 1324 CALL_GRAPH = NO | |
| 1325 | |
| 1326 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then | |
| 1327 # doxygen will generate a caller dependency graph for every global function | |
| 1328 # or class method. Note that enabling this option will significantly increase | |
| 1329 # the time of a run. So in most cases it will be better to enable caller | |
| 1330 # graphs for selected functions only using the \callergraph command. | |
| 1331 | |
| 1332 CALLER_GRAPH = NO | |
| 1333 | |
| 1334 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen | |
| 1335 # will graphical hierarchy of all classes instead of a textual one. | |
| 1336 | |
| 1337 GRAPHICAL_HIERARCHY = YES | |
| 1338 | |
| 1339 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES | |
| 1340 # then doxygen will show the dependencies a directory has on other directories | |
| 1341 # in a graphical way. The dependency relations are determined by the #include | |
| 1342 # relations between the files in the directories. | |
| 1343 | |
| 1344 DIRECTORY_GRAPH = YES | |
| 1345 | |
| 1346 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images | |
| 1347 # generated by dot. Possible values are png, jpg, or gif | |
| 1348 # If left blank png will be used. | |
| 1349 | |
| 1350 DOT_IMAGE_FORMAT = png | |
| 1351 | |
| 1352 # The tag DOT_PATH can be used to specify the path where the dot tool can be | |
| 1353 # found. If left blank, it is assumed the dot tool can be found in the path. | |
| 1354 | |
| 1355 DOT_PATH = | |
| 1356 | |
| 1357 # The DOTFILE_DIRS tag can be used to specify one or more directories that | |
| 1358 # contain dot files that are included in the documentation (see the | |
| 1359 # \dotfile command). | |
| 1360 | |
| 1361 DOTFILE_DIRS = | |
| 1362 | |
| 1363 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of | |
| 1364 # nodes that will be shown in the graph. If the number of nodes in a graph | |
| 1365 # becomes larger than this value, doxygen will truncate the graph, which is | |
| 1366 # visualized by representing a node as a red box. Note that doxygen if the | |
| 1367 # number of direct children of the root node in a graph is already larger than | |
| 1368 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note | |
| 1369 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. | |
| 1370 | |
| 1371 DOT_GRAPH_MAX_NODES = 50 | |
| 1372 | |
| 1373 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the | |
| 1374 # graphs generated by dot. A depth value of 3 means that only nodes reachable | |
| 1375 # from the root by following a path via at most 3 edges will be shown. Nodes | |
| 1376 # that lay further from the root node will be omitted. Note that setting this | |
| 1377 # option to 1 or 2 may greatly reduce the computation time needed for large | |
| 1378 # code bases. Also note that the size of a graph can be further restricted by | |
| 1379 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. | |
| 1380 | |
| 1381 MAX_DOT_GRAPH_DEPTH = 0 | |
| 1382 | |
| 1383 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent | |
| 1384 # background. This is enabled by default, which results in a transparent | |
| 1385 # background. Warning: Depending on the platform used, enabling this option | |
| 1386 # may lead to badly anti-aliased labels on the edges of a graph (i.e. they | |
| 1387 # become hard to read). | |
| 1388 | |
| 1389 DOT_TRANSPARENT = YES | |
| 1390 | |
| 1391 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output | |
| 1392 # files in one run (i.e. multiple -o and -T options on the command line). This | |
| 1393 # makes dot run faster, but since only newer versions of dot (>1.8.10) | |
| 1394 # support this, this feature is disabled by default. | |
| 1395 | |
| 1396 DOT_MULTI_TARGETS = NO | |
| 1397 | |
| 1398 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will | |
| 1399 # generate a legend page explaining the meaning of the various boxes and | |
| 1400 # arrows in the dot generated graphs. | |
| 1401 | |
| 1402 GENERATE_LEGEND = YES | |
| 1403 | |
| 1404 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will | |
| 1405 # remove the intermediate dot files that are used to generate | |
| 1406 # the various graphs. | |
| 1407 | |
| 1408 DOT_CLEANUP = YES | |
| 1409 | |
| 1410 #--------------------------------------------------------------------------- | |
| 1411 # Configuration::additions related to the search engine | |
| 1412 #--------------------------------------------------------------------------- | |
| 1413 | |
| 1414 # The SEARCHENGINE tag specifies whether or not a search engine should be | |
| 1415 # used. If set to NO the values of all tags below this one will be ignored. | |
| 1416 | |
| 1417 SEARCHENGINE = NO |